RAIN HARVESTING TATS15 High Flow Side Mesh Tank Screen
PRODUCT DETAILS
High Flow, Side Mesh Tank Screens ensure you get maximum water flow through your tank screen even as debris loads start to build.
The mesh side walls allow water to flow into the tank through all directions, which means more water in your tank, and less chance of splashing.
| Code | Size | Country |
| TATS15 | 400mm / 16in | Global |
| TATS16 | 500mm / 20in |
Installation
WHAT’S IN THE BOX?
High Flow Side Mesh Tank Screen
TOOLS/MATERIALS YOU MAY REQUIRE
- Screws
- Screwdriver or drill
HIGH FLOW SIDE MESH TANK SCREEN
- If you already have a tank screen installed, remove it prior to installing the new tank screen.
- Place the Tank Screen into the inlet hole of the tank, making sure it is approximately centred in the hole, and that the rim of the tank screen covers the inlet fully.
- Secure the Tank Screen in place using screws (up to 8 gauge in size) that are suitable for the tank material.
Product Specifications
High Flow Side Mesh Tank Screen
Dimensions & Pipe Fittings
| COUNTRY | CODE | Tank Hole Size | A | B | C | D | E |
| Global | TATS15 | 365-382 | 414 | 394 | 59 | 75 | 357 |
| 14.37″-15.04″ | 16.3″ | 15.5″ | 2.3″ | 3″ | 14.04″ | ||
| TATS16 | 455-481 | 505 | 492 | 59 | 75 | 447 | |
| 17.91″-18.94″ | 19.9″ | 19.4″ | 2.3″ | 3″ | 17.61″ |
All dimensions are in mm unless otherwise stated.
Maintenance
You should regularly inspect your Tank Screen and remove any leaves or debris. For a more thorough clean, unscrew your Tank Screen and hose it off before reattaching to your tank.
We recommend covering the hole in your tank while cleaning the screen to prevent mosquitoes getting in.
For even easier maintenance, consider using a Maintenance Tray – a second, removable screen with handle that sits on top of your tank screen and captures the majority of leaves and debris for easy removal. Alternatively, you may wish to consider installing a Maelstrom Filter rather than using a Tank Screen and Maintenance Tray.
A common misconception about collecting rainwater is that all you need is a roof, a tank and some rain. This ‘tanking’ approach cannot always be relied on to deliver the volume – or quality – of water that you require. That is where we can help.
With some thought, your rain harvesting system can provide you with cleaner water and lots of it. Whether you’re completely reliant on tank water or wanting to keep the garden green, our simple steps will help you achieve your goal.
The Rain Harvesting approach to rainwater collection involves using tested and proven products to make quality rainwater available for use in and around your property. You don’t need much to get started and you will be surprised how easy it is to get the most out of your rainwater system.
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and Operating Instructions. This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product specifications may change without notice. © Rain Harvesting Pty Ltd
CUSTOMER SERVICE
For more information or to find out
how we can help, just give us a call on
+61 7 3248 9600
Or visit our website at
rainharvesting.com
Cleaner Water. More of it. | Rain Harvesting by BMCo US
