33654 Rainbrook 2 Light Outdoor Pendant
Product Information: Rainbrook 2 Light Outdoor Pendant
The Rainbrook 2 Light Outdoor Pendant is a high-quality lighting
fixture designed to enhance the look of your home exterior. The
pendant comes with a mounting unit, chain, canopy, socket cover,
and all necessary hardware for installation. The fixture requires
electrical connections and should be installed by a qualified
electrician. The product comes with a warranty for your peace of
mind.
Product Usage Instructions
- Read all instructions before installation and keep them for
future reference. - Assemble the product on a soft, non-abrasive surface to avoid
damage. - Before starting installation, disconnect the power by turning
off the circuit breaker or removing the fuse at the fuse box. - Attach the mounting unit (AA) to the junction box using the
mounting screws (BB) and remove the pre-installed screw collar
ring. - Place the canopy (C) over the pre-installed screw collar loop
on the mounting unit (AA). Turn the screw collar ring until 1/2 of
the screw collar loop threads are exposed. - Secure the chain (B) to the screw collar loop on the mounting
unit (AA). Lower the screw collar ring and canopy (C) over the
chain (B). - Weave the electrical wires and ground wires through the chain
(B), canopy (C), and the center of the mounting unit (AA). - Ensure the quick connector is fully closed when installing the
chain. - Make the electrical connections with a qualified
electrician.
Please consult a qualified electrician if you have any
electrical questions or concerns. Do not attempt installation if
there is a defect in the wire. Please call the customer service
team at 1-800-986-3460 for assistance.
Item #1007260822 Model #33654
USE AND CARE GUIDE
RAINBROOK 2 LIGHT OUTDOOR PENDANT
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday Friday, 9 a.m. 6 p.m., EST, Saturday 1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!
Table of Contents
Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Hardware Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Safety Information
Consult a qualified electrician if you have any electrical questions.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for
help.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-986-3460.
WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.
Warranty
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five (5) years from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.
2
Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED
Ladder
Safety goggles
Electrical tape
Phillips screwdriver
Flat blade screwdriver
Pliers
HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.
Wire strippers
AA
BB
Part Description AA Mounting bracket BB Mounting screw CC Wire nut
CC
Quantity 1 2 3
3
HOMEDEPOT.COM/HOMEDECORATORS
Please contact 1-800-986-3460 for further assistance.
Pre-Installation (continued)
PACKAGE CONTENTS
A
B
C
D
Part Description A B Chain (w/ quick connector) C Canopy D Socket cover
Quantity 1 1 1 2
4
Installation
1 Attaching the mounting unit to the junction box Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB) and remove the pre-installed screw collar ring. Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Turn the screw collar ring until 1/2 of the screw collar loop threads are exposed. Secure the chain (B) to the screw collar loop on the
Lower the screw collar ring and canopy (C) over the chain (B). Weave the electrical wires, ground wires through the chain (B),canopy (C) and the center of the mounting unit (AA).
NOTE: Ensure the quick connector is fully closed when installing the chain.
2 Making the electrical connections
mounting unit (AA) by securing it with the preinstalled ground screw.
Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire
NOTE: attach the smooth wire to the black (positive) wire, attach the ridged wire to the white (neutral) wire.
AA BB
B C
C
AA B CC
3 Securing the light fixture
Secure the canopy (C) to the mounting unit (AA) with the screw collar ring.
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly during installation and use silicone sealant around the canopy for better sealing after installation.
5
C
HOMEDEPOT.COM/HOMEDECORATORS Please contact 1-800-986-3460 for further assistance.
Installation (continued)
4 Installing the light bulb
Secure the socket covers (D) onto the light fixture (A)
D
Install two E12 candelabra 60-watt bulbs (not included).
A
A
Operation
1 Turning the light on
Care and Cleaning
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting
Problem The bulb will not light.
The fuse blows or circuit breaker trips when the light is turned on.
Possible Cause The bulb is burned out. The power is off. There is a faulty wire connection. The circuit breaker is off. There are crossed wires or the power wire is grounding out.
Possible Cause Replace the light bulb. Ensure the power supply is On. Check the wiring. Ensure the circuit breaker is in the ON position. Check the wire connections.
1-800-986-3460.
6
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service
8 a.m. 7 p.m., EST, Monday Friday, 9 a.m. 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.
Home Decorators Collection - Home Decor - The Home Depot
Home Decorators Collection - Home Decor - The Home Depot
