Home Decorators Collection Spnd-06005-del Mauvo Canyon Led Outdoor Small Pendant User Guide

SPND-06005-DEL Mauvo Canyon Led Outdoor Small Pendant

Product Information

Item #1007198079 Model #SPND-06005-DEL

The MAUVO CANYON LED OUTDOOR SMALL PENDANT is a high-quality
product designed to enhance the beauty of your home. It is an
outdoor pendant light that comes with a manufacturer’s
warranty.

Safety Information

Before installing or using the product, please read the safety
instructions carefully. The product should be installed and used
according to the instructions provided.

Please inspect the wire insulation for any cuts, abrasions, or
exposed copper that may have resulted during shipping. If there is
a defect in the wire, do not attempt installation. Contact the
customer service team for assistance.

Turn off the circuit breaker or remove the fuse at the fuse box
before installing or servicing the product.

Warranty

The product comes with a manufacturer’s warranty that covers
defects in material and workmanship from the date of purchase. The
warranty applies only to the original consumer purchaser and only
to products used in normal use and service.

If the product is found to be defective, the manufacturer’s only
obligation, and your exclusive remedy, is the repair or replacement
of the product. The warranty shall not apply to any product that is
found to have been improperly installed, set-up, or used in any way
not in accordance with the instructions supplied with the
product.

The warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration,
faulty installation, or any other failure not relating to faulty
material or workmanship.

Product Usage Instructions

Pre-Installation

Before installing the MAUVO CANYON LED OUTDOOR SMALL PENDANT,
please read the instructions provided carefully.

Planning Installation

Plan the installation carefully to ensure that the product is
installed correctly and safely.

Tools Required

The following tools are required for installation:

  • Wire cutters/strippers
  • Screwdrivers
  • Adjustable wrench
  • Drill with 1/8-inch bit

Hardware Included

The following hardware is included:

  • Pendant light fixture
  • Mounting bracket
  • Screws
  • Wire connectors

Package Contents

The package should contain the following:

  • MAUVO CANYON LED OUTDOOR SMALL PENDANT
  • Installation instructions
  • Mounting hardware

Installation

Please follow the instructions provided carefully to install the
product correctly and safely.

Operation

The MAUVO CANYON LED OUTDOOR SMALL PENDANT is designed to be
used as an outdoor pendant light. It is energy-efficient and
provides bright, warm light.

Care and Cleaning

To clean the product, turn off the power and wipe it with a
soft, dry cloth. Do not use abrasive cleaners or solvents.

Troubleshooting

If you encounter any problems with the product, please contact
the customer service team for assistance.

Item #1007198079 Model #SPND-06005-DEL
USE AND CARE GUIDE
MAUVO CANYON LED OUTDOOR SMALL PENDANT
Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service
8 a.m. – 7 p.m., EST, Monday ­ Friday, 9 a.m. ­ 6 p.m., EST, Saturday 1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
THANK YOU to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for your home
improvement needs. Thank you for choosing Home Decorators Collection!

Table of Contents
Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Pre-Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Planning Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tools Required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Hardware Included. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Installation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Care and Cleaning. . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Safety Information
questions.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for
help.
FCC Responsible Party Name: Bel Air Lighting Address: 28104 Witherspoon Pkwy. Valencia, CA 91355 Telephone Number: 1-800-446-9092

CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-986-3460.
WARNING:
turning off the circuit breaker or by removing the fuse at the fuse box.

Warranty
date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the
alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material
considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied,
shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product. Contact the Customer Service Team at 1-800-986-3460 or visit www.homedepot.com/homedecorators.
2

Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED

Ladder

Safety goggles

Electrical tape

Phillips screwdriver

Flat blade screwdriver

Pliers

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

Wire strippers

Silicone sealant

AA

BB

Part Description AA Mounting bracket BB Mounting screw CC Wire nut

CC
Quantity 1 2 3

3

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Pre-Installation (continued)
PACKAGE CONTENTS
A

B

C

Part Description A B Chain (w/ quick connector) C Canopy

Quantity 1 1 1

4

Installation
1
Attach the mounting unit (AA) to the junction box (not included) with the mounting screws (BB) and remove the pre-installed screw collar ring.
Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Turn the screw collar ring until 1/2 of the screw collar loop threads are exposed.
Secure the chain (B) to the screw collar loop on the
Lower the screw collar ring and canopy (C) over the chain (B). Weave the electrical wires, ground wires through the chain (B),canopy (C) and the center of the mounting unit (AA).
NOTE: Ensure the quick connector is fully closed when installing the chain.
2 Making the electrical connections
mounting unit (AA) by securing it with the preinstalled ground screw.
Connect the black to black (power), the white to white (neutral) and copper wire to ground wire with the wire
NOTE: color,attach the smooth wire with H markings or letters to the black (positive) wire and the ribbed wire with N markings to the white (neutral) wire.
3 Securing the light fixture
Place the canopy (C) over the pre-installed screw collar loop on the mounting unit (AA). Screw on the screw collar ring
CAUTION: To avoid any waterproofing problems, please make sure the light fixture fits the mounting surface perfectly during installation and use silicone sealant around the canopy for better sealing after installation.

AA BB
B C

C
AA B CC

C

5

HOMEDEPOT.COM/HOMEDECORATORS

Please contact 1-800-986-3460 for further assistance.

Operation
1
Turn the light switch on to activate the fixture.
If it is daylight, the fixture will not illuminate. To test the fixture, cover the photocell with electrical tape. Once you confirm the fixture illuminates, remove the electrical tape.
If it is daylight, the fixture may not illuminate with the electrical tape over the photocell, as the photocell can be sensitive. Wait until nighttime to confirm the fixture illuminates.
NOTE: Position the photocell fixture so that the light from the any other fixture or any other light does not shine directly onto the “eye,” as this will interfere with the normal operation of the photocell fixture.

Care and Cleaning
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.

Troubleshooting

Problem The bulb will not light
The fuse blows or circuit breaker trips when the light is turned on.

Possible Cause The power is off. There is a faulty wire connection. The circuit breaker is off. There are crossed wires or the power wire is grounding out.

Possible Cause Ensure the power supply is On. Check the wiring. Ensure the circuit breaker is in the ON position. Check the wire connections.
1-800-986-3460.

6

Questions, problems, missing parts? Before returning to the store, call Home Decorators Collection Customer Service
8 a.m. ­ 7 p.m., EST, Monday ­ Friday, 9 a.m. ­ 6 p.m., EST, Saturday
1-800-986-3460
HOMEDEPOT.COM/HOMEDECORATORS
Retain this manual for future use.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals