If you have any questions or problems with missing parts, please
call MonteauxTM Lighting Customer Service at 1-800-446-9092 between
8 a.m. – 6 p.m., EST, Monday-Friday before returning the product to
the store.

Thank you for choosing MonteauxTM Lighting. We value your trust
and confidence in our products and strive to create quality
products that enhance your home. Visit us online to view our full
line of products available for your home improvement needs.

Safety Information

Consult a qualified electrician if you have any electrical
questions.
Any changes or modifications not approved by the responsible
party could void the user’s authority to operate the
equipment.
Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. Do not attempt
installation if there is a defect in the wire. Call Customer
Service at 1-800-446-9092.
Before starting installation or removing a previous fixture,
turn off the circuit breaker or remove the fuse at the fuse
box.

Warranty

Contact Customer Service at 1-800-446-9092 for warranty
information.

Pre-Installation

Planning Installation

Read all instructions before installation. Assemble the product
on a soft, non-abrasive surface like carpet or cardboard to avoid
damage. Keep your receipt and instructions for proof of
purchase.

Tools Required

Ladder
Safety glasses
Electrical tape
Phillips screwdriver
Flat blade screwdriver
Pliers
Wire strippers

Hardware Included

Note: Hardware not shown to actual size.

Part	Description	Quantity
AA	Mounting unit	1
BB	Mounting screw	2
CC	Wire nut	3
DD	Cap nut	2

Package Contents

Part	Description	Quantity
A	Light fixture	1

Installation

Attaching the Mounting Unit to the Junction Box

Attach the mounting unit (AA) to the junction box (not included)
with the mounting screws (BB).

Making the Electrical Connections

Connect the copper wire from the light fixture (A) to the
mounting unit (AA) by securing it with the preinstalled ground
screw. Connect the black to black (power), the white to white
(neutral), and copper wire to ground wire with the wire nut
(CC).

For further assistance, call Customer Service at
1-800-446-9092.

View Fullscreen

Item # 0000000000 Model # RS2110017
USE AND CARE GUIDE
LED TRACKLIGHT
Questions, problems, missing parts? Before returning to the store, call MonteauxTM Lighting Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
THANK YOU
We appreciate the trust and confidence you have placed in MonteauxTM Lighting through the purchase of this light. We strive to continually create quality products designed to enhance your home. Visit us online to see our full line of products available for
your home improvement needs. Thank you for choosing MonteauxTM Lighting!

Table of Contents

Table of Contents……………………………………………………2 Safety Information…………………………………………………..2 Warranty ………………………………………………………………… 2 Pre-Installation …………………………………………………………3
Planning Installation………………………………………………………….3 Tools Required………………………………………………………………….3

Hardware Included…………………………………………………………….3 Package Contents……………………………………………………………..4 Installation ……………………………………………………………. 5 Operation ………………………………………………………………. 6 Care and Cleaning …………………………………………………. 6 Troubleshooting…………………………………………………….. 6

Safety Information
Consult a qualified electrician if you have any electrical questions.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation. Please call our Customer Service Team at 1-800-446-9092.
WARNING: Before starting installation of this fixture or removal of a previous fixture, disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box.

Warranty

The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of one (1) year from date of purchase. This warranty applies only to the original consumer purchaser and only to products used in normal use and service. If this product is found to be defective, the manufacturer’s only obligation, and your exclusive remedy, is the repair or replacement of the product at the manufacturer’s discretion, provided that the product has not been damaged through misuse, abuse, accident, modifications, alterations, neglect, or mishandling. This warranty shall not apply to any product that is found to have been improperly installed, set-up, or used in any way not in accordance with the instructions supplied with the product. This warranty shall not apply to a failure of the product as a result of an accident, misuse, abuse, negligence, alteration, faulty installation, or any other failure not relating to faulty material or workmanship. This warranty shall not apply to the finish on any portion of the product, such as surface and/or weathering, as this is considered normal wear and tear. The manufacturer does not warrant and specially disclaims any warranty, whether express or implied, of fitness for a particular purpose, other than the warranty contained herein. The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage, including but not limited to any labor / expense costs involved in the replacement or repair of said product.
Contact the Customer Service Team at 1-800-446-9092.

MONTEAUX LIGHTINGTM

Please contact 1-800-446-9092 for further assistance.

Pre-Installation
PLANNING INSTALLATION
Read all instructions before installation. To avoid damaging this product, assemble it on a soft, non-abrasive surface, such as carpet or cardboard. Keep your receipt and these instructions for proof of purchase.
TOOLS REQUIRED

Ladder

Safety glasses

Electrical tape

Phillips screwdriver

Flat blade screwdriver

Pliers

Wire strippers

HARDWARE INCLUDED
NOTE: Hardware not shown to actual size.

Part

Description

Mounting unit

Mounting screw

Wire nut

Cap nut

Quantity 1 2 3 2

MONTEAUX LIGHTINGTM

Please contact 1-800-446-9092 for further assistance.

PPrree–IInnssttaallllaattiioonn ((ccoonnttiinnuueedd))
PACKAGE CONTENTS
A

Part

Description

Light fixture

Quantity 1

MONTEAUX LIGHTINGTM

Please contact 1-800-446-9092 for further assistance.

Installation

1 Attaching the mounting unit to the

junction box

Attach the mounting unit (AA) to the junction box (not

included) with the mounting screws (BB).

2 Making the electrical connections
Connect the copper wire from the light fixture (A) to the mounting unit (AA) by securing it with the preinstalled ground screw.

CC AA

Connect the black to black (power), the white to white

(neutral) and copper wire to ground wire with the wire

nuts (CC) and secure with electrical tape (not included).

NOTE: If the wires from the fixture are the same color, attach the side with markings or letters to the black (positive) wire and the other to the white (neutral) wire.

3 Securing the fixture to the junction box A

Secure the fixture (A) to the junction box by placing the

holes in the canopy over the support screws. Secure with

the cap nuts (DD) as shown.

MONTEAUX LIGHTINGTM

Please contact 1-800-446-9092 for further assistance.

Operation
1 Turning the light on
Turn the light switch on to activate the fixture.

Care and Cleaning
Clean the lamp with a soft, dry cloth. Do not use any cleaners with chemicals, solvents, or harsh abrasives.
Troubleshooting

Problem The bulb will not light.

Possible Cause The power is off. There is a faulty wire connection. The circuit breaker is off.

Solution Ensure the power supply is On. Check the wiring. Ensure the circuit breaker is in the On position.

The fuse blows or circuit There are crossed wires or the breaker trips when the power wire is grounding out. light is turned on.

Check the wire connections. Contact a qualified electrician or call the Customer Service Team at 1-800-446-9092.

MONTEAUX LIGHTINGTM

Please contact 1-800-446-9092 for further assistance.

Questions, problems, missing parts? Before returning to the store, call Monteaux LightingTM Customer Service 8 a.m. – 6 p.m., EST, Monday-Friday
1-800-446-9092
Retain this manual for future use.