CSC2HD Half Door Lockable Wall Unit
Product Information:
Product Code: CSC2HD
Product Name: Rapid Worker Half Door Lockable Wall Unit
Assembly Time Required: 35 minutes
Tools Required: Screwdriver, Electric Drill, Pencil, Measuring
tape/Ruler
*Tools are not included.
Skill Required: Easy
Assembly Skill Rating: 1 out of 5
Recommended Person: Two persons
Product Usage Instructions:
- Unpack all the parts and check if everything is included
according to the list provided in the manual. - Place the back panel on the floor with the outer side facing
down. - Attach the side panels to the back panel using screws and an
electric drill. - Attach the top panel to the side panels and back panel using
screws and an electric drill. - Attach the bottom panel to the side panels and back panel using
screws and an electric drill. - Attach the shelf to the side panels using screws and an
electric drill. - Attach the doors to the front of the unit using screws and an
electric drill. - Install the lock on the door using screws and a
screwdriver. - Your Rapid Worker Half Door Lockable Wall Unit is now ready to
use.
Assembly Instructions:
Product Code : CSC2HD Product Name: Rapid Worker Half Door Lockable Wall Unit
Time Required:
35 minutes
Tools Required:
Screwdriver, Electric Drill, Pencil, Measuring tape/Ruler *Tools are not included.
Skill Required:
Easy
Hard
The Assembly Skill Rating is a 5-point system that shows the degree of effort needed in assembling a specific product. With 1 being easy for the average person and 5 requiring an expert. For most products, two persons are recommended.
NOTE · As this is a commercial product, some intermediate skills may be required.
· No pre-drill holes or markings are provided on our table or desk tops. · Please check you have all hardware before assembling.
· If you are missing any hardware, please contact your Rapidline reseller. Please ensure you have the name of the item, required hardware part and quantity.
· Please retain your receipt as proof of purchase to validate your warranty. · Assemble on a clean, flat, smooth surface such as a rug or carpet to avoid parts from being scratched.
· Remove all wrapping materials, including staples and packing straps before you start to assemble · Keep all hardware parts out of reach of children. CAUTION
· Heavy product. Do not attempt to lift or move without help · Do not tighten screws and bolts until completely assembled. · Do not use this product unless all bolts and screws are firmly secured and tightened.
WARNING · If parts are missing, broken, damaged or worn stop using the product until all repairs are made.
· Failure to follow these warnings could result in serious injury.
