CMA-181GW Dishmachine
Product Information
The CMA-181GW is a dishwashing machine manufactured by CMA
Dishmachines. The machine is designed to wash dishes and utensils
for commercial kitchens. It has a stainless steel body and comes
with various mechanical parts and assemblies to perform the washing
process. The machine has a detergent injection hole plug, a control
box, a chemical bulkhead, and a liquid level switch.
Parts Manual
The parts manual for the CMA-181GW contains information about
the various mechanical parts and assemblies that come with the
machine. The manual includes details about the initial parts kit,
mechanical drawings for the cabinet assembly, and the door
assembly. The initial parts kit contains multiple parts such as
motor contactor, heater contactor, 2-minute timer motor, ice cube
relay, solenoid coil, rocker switch start momentary, and many
more.
Cabinet Assembly
The cabinet assembly of the CMA-181GW contains various parts
such as side panel, peri pump front, R side cover, SS top, scrap
basket, tray track R.H., tray track L.H., lower front panel, SS
body, leg 6 1/2 -13 thread, door gasket, gasket bracket, screws,
lock nut, internal lock star washer, detergent injection hole plug,
control box gasket, body magnet holder, magnet for CMA-180UC,
thermo well ass’y CMA-180UC (wash), and many more.
Door Assembly
The door assembly of the CMA-181GW contains various parts such
as L-1X door new (7/2002), door support rod block, door hinge R.H.,
door hinge L.H., door rod screw pin for CMA-180UC, door support rod
right, door support rod left, door magnet, flathead screw, and many
more.
Product Usage Instructions
Before using the CMA-181GW dishwashing machine, ensure that all
the mechanical parts and assemblies are correctly assembled and
installed. Follow the below instructions to use the machine:
- Fill the machine with water as per the requirement.
- Add detergent to the machine through the detergent injection
hole plug. - Turn on the machine and select the desired washing mode.
- Load the dishes and utensils into the machine.
- Close the door assembly and ensure that it is locked
properly. - Wait for the washing process to complete.
- Open the door assembly and remove the washed dishes and
utensils.
After using the machine, clean and maintain it as per the
instructions provided in the user manual to ensure its longevity
and efficient performance.
MODEL CMA-181GW
PARTS MANUAL
Rev 1.01B 12-2022
CMA DISHMACHINES 12700 KNOTT AVENUE
GARDEN GROVE, CALIFORNIA 92841
8 0 0 -8 5 4 -6 4 1 7
FAX 714-895-2141
wwwcmadishmachines.com Buy Parts
TABLE OF CONTENTS
MODEL CMA-181GW
1. PARTS MANUAL………………………………………………………………………………… 3
1.1. INITIAL PARTS KIT (P/N 1100.66) …………………………………………………………………………….. 3 1.2. MECHANICAL DRAWINGS ………………………………………………………………………………………… 4
1.2.1. Cabinet Assembly…………………………………………………………………………………………. 4 1.2.2. Door Assembly ……………………………………………………………………………………………… 5 1.2.3. Electrical Tray ………………………………………………………………………………………….6 & 7 1.2.4. Control Box Assembly p/n 18611.62……………………………………………………………….. 8 1.2.5. Chemical Dispenser ………………………………………………………………………………..9 & 10 1.2.6. Plumbing System Assembly (Effective August 2012) ………………………………………..11 1.2.7. Plumbing System Assembly…………………………………………………………………………..12 1.2.8. Drain System Assembly…………………………………………………………………………………13 1.2.1. Wash System ………………………………………………………………………………………………14 1.2.2. Rinse System ………………………………………………………………………………………………15 1.2.3. S/S Pump Assembly …………………………………………………………………………………….16 1.2.4. Heater Assembly …………………………………………………………………………………..17 & 18 1.2.5. Drain Valve………………………………………………………………………………………………….19 1.2.6. Water Tempering Kit (Optional)………………………………………………………………………20
wwwcmadishmachines.com Buy Parts
Parts Manual
1. Parts Manual
1.1. Initial Parts Kit (P/N 1100.66)
P/N
DESCRIPTION
Qty
15504.00 Motor Contactor, 2-Pole 20 Amp
1
15504.50 Heater Contactor, 2-Pole 35 Amp
1
00501.00 2-Minute Timer Motor
1
00631.00 Ice Cube Relay 120 V
1
00707.00 ½ Water Solenoid Repair Kit JE
1
00738.15 Solenoid Coil JE 220V
1
15523.00 Rocker Switch Start Momentary
1
15523.50 Rocker Switch Drain/Fill
1
15524.00 Rocker Switch Power Maintained
1
00556.10 Reed Switch
1
03623.00 1/2″ Vacuum Breaker Repair Kit Watts
1
00707.00 1/2″ Water Solenoid Repair Kit J/E
1
04113.00 L1X/L1-C Drain Valve 120V
1
00206.70 Pump Seal Kit
1
13417.89 Heater Thermostat
1
17523.60 High Limit Switch 200°F
1
00411.00 Microswitch
1
03203.01 Dual Temperature Display Kit
1
00738.15 Solenoid Coil JE 115V/60Hz
1
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 3
1.2. Mechanical Drawings
1.2.1. Cabinet Assembly
Parts Manual
ITEM NO. NO. REQ’D P/N
1
1 14502.83
2
1 14508.11
3
1 14503.40
4
1 14510.00
5
1 14511.00
6
1 14512.00
7
1 14515.22
8
1 14601.00
9
4 01146.00
10 1 14506.50
11 1 14506.45
12 6 00940.50
13 8 00941.00
14 4 03801.00 15 4 00940.51
DESCRIPTION
Side Panel L.H. for CMA-181GW Peri Pump Front R Side Cover(181GW) SS Top for CMA-180UC Scrap Basket for CMA-180UC Tray Track R.H. for CMA-180UC Tray Track L.H. for CMA-180UC Lower Front Panel for CMA-181GW SS Body CMA-181 GW ^Leg 6″ 1/2 -13 Thread Door Gasket for CMA-180UC Gasket Bracket for CMA-180UC 10-32 x 3/8 Trusshead Screw 10-32 x 5/8 Panhead Screw
10-32 Lock Nut #10 Internal Lock Star Washer
ITEM NO. NO. REQ’D P/N
16
1 01513.00
17
1 00752.00
18
1 00912.00
19 2ft 03705.84
20
1 14558.00
21
2 00557.80
22
2 00927.00
23
2 04806.00
24
1 03204.50
25
1 03415.00
26
1 14508.21
27
4 01147.50
28
1 13463.10
29
1 03705.21
30
1 03705.25
DESCRIPTION
Detergent Injection Hole Plug Detergent Injection Hole Plug Gasket 1/4″-20 Nylon Lock Nut Control Box Gasket for CMA-180UC Body Magnet Holder for CMA-180UC Magnet for CMA-180UC 8-32 Lock Nut #10 Brass Flat Washer Thermo well Ass’Y Cma-180UC (Wash) Chemical Bulk Head Peri Pump Back R Side Cover (180GW) Leg 4″ 1/2-13 1″ Diameter (UC) Liquid Level Switch
Timer Splash Shield Mylar Heater Splash Shield Mylar
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 4
1.2.2. Door Assembly
Parts Manual
ITEM NO. NO. REQ’D P/N
1
1 04907.90
2
2 04517.60
3
1 14570.00
4
1 14570.50
5
2 04919.00
6
1 04918.60
7
1 04919.50
8
3 00557.80
9
2 00970.60
DESCRIPTION
L-1X Door New (7/2002) Door Support Rod Block Door Hinge R.H. for CMA-180UC Door Hinge L.H. for CMA-180UC Door Rod Screw Pin for CMA-180UC Door Support Rod Right Door Support Rod Left Door Magnet 6-32 x 1/2″ Flathead Screw
ITEM NO. NO. REQ’D P/N
10 1 14558.61
11 2 00965.00
12
2 00605.30
13 2 04517.15
14 10 00912.00
15 14 00924.00
16 4 00914.10
17 2 14518.00
DESCRIPTION
Door Magnet Holder for CMA-180UC 6-32 Lock Nut Door Rod Spacer Door Stop (Parallel) 1/4″-20 Nylon Lock Nut 1/4″ SS Washer 1/4″-20 x 5/8″ Hexhead Bolt Splash Guard
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 5
1.4.3. Electrical Tray
Parts Manual
Effective January 2021
8 2 14
4
6
12
11 13
7 8
8
1
15
16
17
18
ITEM NO. NO. REQ’D P/N
1
1 14504.00
2
1 14408.87
3
1 15504.00
4
1 15504.50
5
1 15520.50
6
2 00438.00
7
2 01001.00
8 12 00927.00
9
1 13426.60
DESCRIPTION
Electrical Tray for CMA-180UC Timer 2 Min 7 Cam 180-UC S.T Motor Contactor, 2-Pole 20 Amp Heater Contactor, 2-Pole 35 Amp Power Block, 3-Position Snap Bushing, Universal 6-32 x 1″ Panhead Screw 8-32 Nylon Lock Nut Ground Block
9
5
3 10
ITEM NO. NO. REQ’D P/N
10
2 00965.00
11
1 00401.85
12
9 00400.85
13
1 00401.85
14
1 00400.85
15
1 00471.10
16
1 00474.00
17
1 00470.10
18
2 00907.00
DESCRIPTION
6-32 Lock Nut 3/4″ Conduit Connector, Straight 3/4″ Conduit, Sealtite HT Plumbing Bracket Timer Motor Toggle Switch DPST 20A Toggle Switch Bracket Toggle Switch Rubber Boot 6-32 x 1/2″ Panhead Screw
MODEL CMA-180UC PARTS MANUAL Rev. 1.20C
Buy Parts
Page 6
1.2.3. Electrical Tray
Parts Manual
ITEM NO. NO. REQ’D P/N
1
1 14504.00
2
1 14408.81
3
1 15504.00
4
1 15504.50
5
1 15520.50
6
2 00438.00
7
2 01001.00
DESCRIPTION
Electrical Tray for CMA-180UC Timer 2Min 5 Cam 180-UC S.T Motor Contactor, 2-Pole 20 Amp Heater Contactor, 2-Pole 35 Amp Power Block, 3-Position Snap Bushing, Universal 6-32 x 1″ Panhead Screw
ITEM NO. NO. REQ’D P/N
8 12 00927.00
9
1 13426.60
10 2 00965.00
11 1 00401.85
12 9 00400.85
13 1 13304.61
DESCRIPTION
8-32 Nylon Lock Nut Ground Block 6-32 Lock Nut 3/4″ Conduit Connector, Straight 3/4″ Conduit, Sealtite HT Plumbing Bracket
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 7
1.2.4. Control Box Assembly p/n 18611.62
Parts Manual
ITEM NO.
NO. REQ’D
P/N
1
1 15520.00
2
2 00631.00
3*
1 03203.01
4
1 03202.60
5
1 14503.00
6
1 15523.00
7
1 15523.50
8
1 15524.00
9
1 13426.50
10 1 00438.00
11 2 01001.00
DESCRIPTION
Power Block 12-Position Ice Cube Relay 120 V Dual Temperature Display Kit Thermometer Transformer Control Drawer for CMA-180UC Rocker Switch Start Momentary * Rocker Switch Drain/Fill DPDT/Mom. * Rocker Switch Power Maintained * Ground Block Snap Bushing, Universal 6-32 x 1″ Panhead Screw
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
ITEM NO.
NO. REQ’D
P/N
12
2 00965.00
13
5 00927.00
14
6 00911.00
15
1 00556.10
16
4 00917.00
17
2 03705.82
18
2 03202.66
19
2 00971.10
20
1 03485.00
21
1 06231.67
22* 1 00630.50
* Effective January 2017
DESCRIPTION
6-32 SS Nylon Lock Nut 8-32 Nylon Lock Nut 8-32 x 1/2″ Panhead Screw Reed Switch 8-32 PM Nut Sponge Strip Thermocouple 4-40 Nylon Lock Nut Switch Guard (Undercounter) CMA-181GW Panel Label Timer Relay 120V
Buy Parts
Page 8
Parts Manual
1.2.5. Chemical Dispenser Assembly January 2021
ITEM NO. NO. REQ’D P/N
1
1 00416.00
2
1 00417.10
3
1 00919.00
4
1 00918.00
5
1 00419.00
6
1 00418.00
7
1 00911.00
DESCRIPTION
Peristaltic Pump Motor Peristaltic Pump Block 10-32×1-1/2″ Pan Head Screw 10-32×1-1/2″ Fillister Head Screw Peristaltic Pump Rotor Peristaltic Pump Cover 8-32×1/2″ Pan Head Screw
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
ITEM NO. NO. REQ’D P/N
8
1 02257.23
9
1 00448.00
10 1 00425.23 11 1 00425.21
12 1 00425.24
13 1 00443.00
14 1 14508.40
DESCRIPTION
Squeeze Tube 11″ Barrel Connector, Male Chemical Tubing, Red, 50 Ft Roll Chemical Tubing, Blue, 50 Ft Roll Chemical Tubing, White, 50 Ft Roll Tube Stiffener 180UC Peri Pump Mount
Buy Parts
Page 9
1.2.5. Chemical Dispenser
Parts Manual
ITEM NO. NO. REQ’D P/N
1
2 00816.00
2
2 00818.00
3
2 00839.00
2 00835.30
4
2 00815.00
5
1 00821.10
6
2 00820.40
7
2 00820.00
DESCRIPTION
Peri Pump Gear Motor (GL-C/GW-100) GL-C/GW-100 Peri Pump Cartridge GL-C/GW-100/UC180 Sqz Tube Clear GL-C/GW-100/UC180 Sqz Tube Black GL-C Peri Pump Complete GL-C/GW-100 Transformer Circuit Board Connector GL-C/GW-100 Peri Pump Circuit Board
ITEM NO. NO. REQ’D P/N
8
4 13826.47
9
4 00820.06
10 4 00820.07
11 2 13826.00
12 2 00820.50
13 2 00971.10
14
1 14508.00
15
1 14585.73
DESCRIPTION
4-40 x 3/16 Phil Pan Head Screw Circuit Board Standoff Circuit Board Standoff Cap 4-40 X 5/8 Pan Head Screw Circuit Board Stand-off Bushing 4-40 Nylon Lock Nut UC180 Peri Pump Box Dispenser Splash Shield
*Effective May 2019
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 10
Parts Manual
1.2.6. Plumbing System Assembly (Effective August 2012)
ITEM NO. NO. REQ’D P/N
1
1 15602.00
2
1 03614.00
3
1 03604.50
4
1 14508.50
5
1 03801.00
6
2 00924.00
7
1 03603.10
8
1 00747.00
9
1 03605.10
10 1 03603.20
11 4 00770.10
12 1 41062.00
13 1 03205.00
14 1 00743.11
15 1 05007.60
16 1 03624.00
17 1 00739.50
18 1 03624.25
19 1 03623.00
20 2 03614.00
DESCRIPTION
SS Braided Hose 20″ 1/2 F x 1/4MPT Nipple Brass 1/2 x Close Fitting w/ Flow Disk Plumbing Bracket 10-32 Lock Nut 1/4 SS Washer /2 Water Sol Valve JE115V/60Hz Nipple Brass 1/2×4 Plumbing tube CMA-181GW 1/2″ Water Solenoid Valve Bonnet 5/8 Compression Fitting Nut 1/2″ Strainer Ball Valves * Thermo well Tee ^1/2 Tee FxFxF SS Vacuum Breaker Line 1/2″ Vacuum Breaker Watts Vacuum Breaker Cap, SS Vacuum Breaker Bonnet, Brass 1/2″ Vac. Breaker Repair Kit Watts Nipple, Brass 1/2″ Close
ITEM NO. NO. REQ’D P/N
21 1 03232.00
22 1 13669.45
23 1 00798.00
24 2 00915.00
25 2 00724.00
26 1 13304.53
27 1 00798.60
28 1 13604.10
29 1 13605.45
30 1 00706.10
31 1 13658.00
32 1 41062.10
33 2 00745.00
34 1 00707.00
35 1 00738.15
36
1 00940.50
37
1 03101.45
38
1 40137.00
39
1 00770.20
DESCRIPTION
1/8″ Male Plug SS Mixing Chamber CMA-180UC 1/2″ SS Braided Hose 1/4″-20 SS Nut 1/2″ Compression x 1/2″ MIP Adapter Long Support Bracket SS Braided Hose 7″ 1/2 x 1/8 Bushing Brass Pressure Gauge for CMA-180UC Solenoid JE Spring Only Inlet Check Valve Ball Strainer 1/2 90 Deg Street Elbow 1/2 Water Solenoid Repair Kit JE Solenoid Coil JE 220V (3/4 & 1/2) 10-32 x 3/8 Truss Head Screw Hose Clamp #4 Size #002 SS 1/4 Street Elbow 90Deg 5/8 Compression Fitting Ring
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 11
1.2.7. Plumbing System Assembly
Parts Manual
ITEM NO. NO. REQ’D P/N
1
1 15602.00
2
1 03614.00
3
1 03604.50
4
1 05907.00
5
2 00912.00
6
2 00924.00
7
1 03604.00
8
1 00747.00
9
1 03605.10
10 1 03604.30
11 4 00760.00
12 1 41062.00
13 1 00214.60
14 2 00743.11
15 1 05007.60
16 1 03624.00
17 1 00739.50
DESCRIPTION
SS Braided Hose 20″ 1/2 F x 1/4MPT Nipple Brass 1/2 x Close Fitting w/ Flow Disk Valve Bracket 1/4-20 Nylon Lock Nut 1/4 SS Washer SS Water Solenoid Valve 1/2″ Nipple Brass 1/2×4 Plumbing tube CMA-181GW Dema Valve Repair Kit 1/2″ 5/8″ Compression x 1/2″ MIP Adapter 1/2″ Strainer Ball Valves * 1/4″ Compression x 1/2″ MIP FTG ^1/2 Tee FxFxF SS Vacuum Breaker Line 1/2″ Vacuum Breaker Watts Vacuum Breaker Cap, SS
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
ITEM NO. NO. REQ’D P/N
18 1 03624.25
19 1 03623.00
20 2 03614.00
21 1 03232.00
22 1 13669.45
23 1 00798.00
24 2 00915.00
25 2 00724.00
26 1 13304.53
27 1 00798.60
28 1 13604.10
29 1 13605.45
30 1 41015.60
31 1 13658.00
32 1 41062.10
33
1 00743.10
34
2 00745.00
DESCRIPTION
Vacuum Breaker Bonnet, Brass 1/2″ Vac. Breaker Repair Kit Watts Nipple, Brass 1/2″ Close 1/8″ Male Plug SS Mixing Chamber CMA-180UC 1/2″ SS Braided Hose 1/4″-20 SS Nut 1/2″ Compression x 1/2″ MIP Adapter Long Support Bracket SS Braided Hose 7″ 1/2 x 1/8 Bushing Brass Pressure Gauge for CMA-180UC Water Solenoid Coil Only Inlet Check Valve Ball Strainer 1/2 Tee FxFxF Brass 1/2 90 Deg Street Elbow
Buy Parts
Page 12
1.2.8. Drain System Assembly
Parts Manual
ITEM NO. NO. REQ’D P/N
1
1 04113.00
2
6 03101.00
3
1 03109.00
DESCRIPTION
Drain Valve 120V Hose Clamp #16-1″ Transfer Hose 90Deg 1″
ITEM NO. NO. REQ’D P/N
4
1 15601.00
5
1 N/A
DESCRIPTION
Hose 1″ ID 90Deg 3X11 Raw Material
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 13
1.2.1. Wash System
Parts Manual
ITEM NO. NO. REQ’D P/N
1
2 00304.46
2
4 00308.20
DESCRIPTION
Wash Arm Wash Arm End Plug
ITEM NO. NO. REQ’D P/N
3
2 04305.17
DESCRIPTION Red Silicon Gasket 1/16″ Thick
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 14
1.2.2. Rinse System
Parts Manual
ITEM NO. NO. REQ’D P/N
1
2 00304.29
2
2 04305.17
DESCRIPTION
Rinse Arm CMA-180UC Red Silicon Gasket 1/16″ Thick
ITEM NO. NO. REQ’D P/N
3
4 00308.17
DESCRIPTION Rinse Arm End Cap
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 15
Parts Manual
1.2.3. S/S Pump Assembly
ITEM NO. NO. REQ’D P/N
1
4 00908.00
2
4 00926.00
3
4 00913.00
4
1 00201.60
5
1 00201.96
6
1 03224.60
7
1 03226.70
8
1 00206.70
9
1 03222.70
10 1 04604.00
11 1 04206.75
DESCRIPTION
5/16″-18 x 5/8″ SS Hexhead Bolt 5/16″ SS Washer 5/16″-18 Hex Nut SS Wash Pump Motor 220v Slinger Washer Cone Shape SS Pump Backplate Volute O-Ring For SS Pump SS Pump Seal Kit SS Pump Impeller ^35 Deg Elbow MIP X Barb SS Pump Cover
ITEM NO. NO. REQ’D P/N
12
2 00238.00
13
1 00208.40
14
1 00207.00
15
1 00200.70
16
1 03222.74
17
1 03222.72
18
1 13809.70
19
6 00914.70
20
1 00208.21
21
1 03101.00
22
1 03108.62
DESCRIPTION
3/8″ Male Plug Slip Joint Nut O Ring Buna Slip Joint Nut 1 1/2 x 1 1/4 Includes Items 4,5,6,7,8,9,and 11 Flat Washer 8 mm Shaft Nut Lock Washer 8mm SS Pump Seal Shaft Nut 8mm Socket Head Screw 10 mm Slip Joint Nut Friction Ring Hose Clamp # 16 1″ Transfer Hose 1″ Reinforce 25″
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 16
Parts Manual
1.4.10. New Heater Assembly (Triangular Flange) After January 2020
ITEM NO. NO. REQ’D P/N
1
1 15518.00
2
1 13417.89
3
1 17523.60
4
1 15518.11
5
3 13805.00
DESCRIPTION
Heater 6kW 220V Triangular Flange* Heater Thermostat High Limit Switch 200°F Gasket for Triangular Flange Heater 5/16″-18 Nylon Insert Lock Nut
* Gasket included
ITEM NO. NO. REQ’D P/N
6
3 00926.00
7
1 13417.50
8
2 00965.00
9
2 17524.00
DESCRIPTION
5/16″ SS Washer Thermowell Tube Assm 6-32 Lock Nut High Limit Switch Spacer
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 17
1.2.4. Heater Assembly
Parts Manual
ITEM NO. NO. REQ’D P/N
1
1 15518.00
2
1 13417.89
3
1 17523.60
4
1 15518.11
5
3 13805.00
DESCRIPTION
Heater 6kW 220V Triangular Flange* Heater Thermostat High Limit Switch 200°F Gasket for Triangular Flange Heater 5/16″-18 Nylon Insert Lock Nut
ITEM NO. NO. REQ’D P/N
6
3 00926.00
7
1 40116.00
8
2 00965.00
9
2 17524.00
* Gasket included
DESCRIPTION
5/16″ SS Washer 1/4″ Compression x 1/4″ MIP FTG 6-32 Lock Nut High Limit Switch Spacer
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 18
1.2.5. Drain Valve
Parts Manual
ITEM NO.
NO. REQ’D
P/N
1
1 00104.50
2
1 04103.14
3
1 04103.20
4
1 04103.19
5
1 04103.17
5A 1 04103.23
6
1 04113.33
7
4 04113.18
8
1 04113.16
9
1 04103.15
10 1 04113.12 11 2 04113.21
12 2 04113.23
13 1 04113.13
DESCRIPTION
Drain Motor 120V Drain Valve Spring Drain Valve Drive Pin Drain Valve Washer (Thin) SS Drain Valve Seal Washer (Rubber) Drain Seal Bearing (White Washer) Drain Valve Housing Cover Valve Cover Screw Drain Valve Hinge/Seal Drain Valve Housing Gasket Drain Valve Housing ( Includes #11&12) Screw #6-32 X 0.625 Flanged Hex Screw – #6-32 X 1.5″” Flanged Hex Valve Cover Assy. Rectangular
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 19
1.2.6. Water Tempering Kit (Optional)
Parts Manual
MODEL CMA-181GW PARTS MANUAL Rev. 1.01B
Buy Parts
Page 20












