BHC-110WF Web Camera
Product Information: B&H PC PRO WIFI
The B&H PC PRO WIFI camera is an AI & IoT camera that
comes with a USB A – USB C 116cm cable, a wireless cam, a USB-A
dongle receiver, and a user manual. It features a universal
mounting clip, power ON/OFF button, pairing button, USB-C power
connection port, tripod thread, and LED indicator. The camera
supports UVC and UAC (2.0 and downward compatible) protocol,
eliminating the need for any extra drivers to be installed. The
camera can be used at a maximum distance of about 20 meters in a
straight line without obstacles in a proper RF environment,
although the range of use varies greatly depending on the
environment.
Product Features:
- Universal mounting clip
- Power ON/OFF button
- Pairing button
- USB-C power connection port
- Tripod thread
- LED indicator
- Supports UVC and UAC (2.0 and downward compatible)
protocol
Safety Precautions:
- Do not handle any element or touch the product itself with wet
hands - Do not allow substances such as liquids and metals to get
inside the product as this could cause a short circuit - Before cleaning the product, it must be completely disconnected
from the power supply - If you notice smoke or a strange smell coming from the product,
immediately turn off the device and disconnect its power
supply - The transportation and installation process must be done
carefully to avoid vibrations and impacts that may damage the
product or affect its correct operation - Do not step on or deform the charging cable or place it near a
heat source, as it may cause malfunction and risk of short
circuit - This product has no user-serviceable parts. Damage caused by
the user is not covered under warranty
Camera LED Indications:
- Red LED lighting: Charging
- Green LED: Connected
- Low battery
- Disconnected
- Pairing
- USB receiver Green
- Connected
- Disconnected
- Pairing
Product Usage Instructions:
Setting Up:
- Charge Webcam Battery: Use a standard USB charger (not
supplied) or connect to a USB port of a computer to charge the
battery using the supplied USB cable. - Placement:
- For placement on a monitor: Place the webcam on a computer,
laptop, or monitor at a position or angle desired. - Adjust the webcam to make sure the foot on the universal
mounting clip is flush with the back of your device. - Manually adjust the webcam left/right & up/down to the best
position to frame yourself.
- For placement on a monitor: Place the webcam on a computer,
Maintenance Tips:
- If the camera is not used for a long time, please turn off the
power switch after use. - Use a soft cloth or cotton paper to remove dust from the camera
case. - When cleaning the camera lens, please use a dry soft cloth to
clean it.
THE AI & IoT CAMERA COMPANY
B&H PC PRO WIFI
P/N: BHC-110WF
2 What´s in the box
User manual
x1 USB A – USB C 116cm cable
x1 Wireless cam
x1 USB-A dongle receiver
x1 User manual
1 Know your product
Universal mounting clip
Power ON/OFF button Pairing button
USB-C Power connection port
Tripod thread
Led indicator
Pairing button
3 Product features
Laia PC Pro Wifi is a wireless 2.4 GHz camera that does not requires a cable connection. Powered by its built-in lithium battery offers you more than 3 hours of use with a single charge, but it is also possible to use it while charging through USB-C cable. In addition, its built-in universal mounting clip offers 360° rotation an 110° inclination for quick and easy camera placement and adjustments.
PC Pro Wifi can be used at a maximum distance of about 20 meters in a straight line without obstacles in a proper RF environment. The range of use varies greatly depending on the environment. Support UVC and UAC (2.0 and downward compatible) protocol, so it is not necessary to install any extra drivers. Simply plugin the included USB receiver and it will work automatically.
It is also compatible with the main video conferencing services on the market such as Microsoft Teams, Zoom and Skype. Supporting 1080P FullHD can provide image encoding output of 1080@30fps thanks to its USB 2.0 interface. The field of view offers up to 65.5º degrees horizontally and 73º degrees diagonally, along with the built-in microphone that offers room sound pickup at a 180º angle.
4 Safety precautions
Product handle
Do not handle any element or touch the product itself with wet hands, and do not allow substances such as liquids and metals to get inside the product as this could cause a short circuit.
Before cleaning the product, it must be completely disconnected from the power supply. To connect and disconnect the cable from the product, hold the connector firmly, without applying excessive force.
As it is an electrical product, if you notice smoke or a strange smell coming from the product, immediately turn off the device and disconnect its power supply.
Transportation and installation
The transportation and installation process must be done carefully to avoid vibrations and impacts that may damage the product or affect its correct operation.
Do not step on or deform the charging cable or place it near a heat source, as it may cause malfunction and risk of short circuit.
Do not disassemble
This product has no user-serviceable parts. Damage caused by the user is not covered under warranty.
* If you use a router or firewall to connect to the Internet, you may not be able to use Internet-based functions such as video chat.
Concepted & designed in EU I Copyright © 2017 All rights reserved – www.laiatech.com
THE AI & IoT CAMERA COMPANY
5 Camera led indications
Lighting Slow flash Fast flash
Red Charging
Camera Green
Connected
Low battery
Disconnected
Pairing
USB receiver Green
Connected
Disconnected
Pairing
6 Setting up
1. Charge Webcam battery: Use an standar USB charger (not supplied) or connect to a USB port of a computer to charge the battery using the supplied USB cable.
USB Port
Adapter
2. Placement:
-For placement on a monitor: Place the webcam on a computer, laptop or monitor at a position or angle desired. Adjust the webcam to make sure the foot on the universal mounting clip is flush with the back of your device. Manually adjust the webcam left/right & up/down to the best position to frame yourself.
– For placement on a tripod: Locate the ¼ inch tripod thread on the bottom of the universal mounting clip. Secure the webcam on your tripod by twisting it into the ¼ inch thread. Place the webcam with the tripod anywhere you desire to the best position to frame yourself.
Cautions: Do not stack this product on top of each other or place heavy objects on
top of this product as it may cause malfunction.
Do not install or store the product in a place with high humidity, direct sunlight, high temperature, or dirt and liquid.
Do not use close to high-power RF devices, such as radio transmitters.
7 Maintenance tips
Maintenance of camera
If the camera is not used for a long time, please turn off the power switch after use.
Use a soft cloth or cotton paper to remove dust from the camera case. When cleaning the camera lens, please use a dry soft cloth to clean it
and if the dirt is heavy, please use a neutral cleaner gently. Do not use strong or corrosive detergents, to prevent the lens from being scratched and affecting the correct operation and image quality.
8 Trubleshooting
How to re-connect?
Pairing button Led light
1. Turn on the camera and the green led will start blinking slowly.
2. Press the pairing button on the camera and connect the USB receiver to the computer.
3. After the receiver flashes, press the pairing button.
4. When both LEDs turn solid green, the connection is complete.
How to check if camera is working correctly?
WINDOWS 11
Open App menu and select camera
WINDOWS 10
3. Connection and use: Connect USB receiver to your computer and it will start flashing. Then press the On/Off button to turn on the camera and the green
led will light up. The device is ready for use.
USB Port
USB A dongle receiver
Camera automatic power off function: If you turn off your computer while the camera is on, the camera will automatically turn off.
Open App menu and select camera
When multiple webcams connected, click “switch camera”
Concepted & designed in EU I Copyright © 2017 All rights reserved – www.laiatech.com
MAC OS
THE AI & IoT CAMERA COMPANY
Click on Camera control
Open Face Time, select video settings and click on camera name
9 Tips for Microsoft Teams
Fine-tuning of Laia PC-Pro Wifi with Microsoft Teams.
You have easy access to webcam controls to adjust the basic and advanced settings of your webcam from the Microsoft Teams settings menu.
Click on the dropdown “More actions” near your profile picture at the top of the app, then select Settings
– Adjust Zoom in or out to include/exclude your surroundings.
– Use Pan and Tilt to find the best angled. – Click the “Apply” button to confirm your selection. – Click the “OK” Button to save and close “Properties”
window.
Select Devices and scroll down to the “Camera section” Uncheck “Automatically adjust camera controls” box and click “Open camera settings”
Properties window will appear. If you need to correct the image due to poor lighting environments, click the “Video Proc Amp” tab
Adjust the advanced settings of your camera accordingly to get a better image quality, then click the “Apply” button to confirm your selection and finally click the “OK” Button to save and close “Properties” window.
Concepted & designed in EU I Copyright © 2017 All rights reserved – www.laiatech.com
THE AI & IoT CAMERA COMPANY
10 Product specifications
Camera Sensor
Resolution Total pixels Min. illumination Output Image Format
1/2.9” CMOS 1920 x 1080 Pixels 2.07 M 0.5 Lux MJPG/YUY2/H.264
Frame rate (max)
1080p@30fps
SNR Focus type
58dB Fixed focus
Minimum object distance 0,3 m
Field of view
Diagonal: 73º±5%, Horizontal: 65,5º ±5%
Color bit depth UVC / UAC
24 bits 2.0 and downward compatible
USB Protocol Others Microphone Number
USB 2.0 (Up to 1080p@30fps capable) Auto Exposure (AE) / Auto White Balance (AWB)
1
Type
Electret
Pickup distance/coverage Max 3m with 180º (horizontal)
SNR Sensibility
58dB -34dB
Frecuency response Audio processing General OS Support
System requirements
100Hz- 8KHz No
Windows 8/8.1/10/11,mac OS Monterey, BigSur, macOS 10.12 to 10.15 and Chrome OS* (*Some apps may not support external cameras) CPU: Intel(R) Core(TM) i3 1.2GHz or better RAM: 2GB or higher Minimum free hard disk space: 1 GB USB: At least 1 free USB port
Compatible software Camera connector
Zoom, Microsoft Teams, Google Meet, Cisco Webex Meetings, Skype, GoFacing.
USB-C female. Only power
WiFi dongle connector
USB-A male
Tripod Mounting Option Yes. Standard, ¼ inch thread
Package dimensions/ Package weight
126 x 120 x 69mm 270g
Camera dimensions(folded) 60 x 57 x 79 mm
Camera weight
160g
Dongle dimensions
74 x 22 x 9mm
Dongle weight
10g
Operating temperature
0ºC to +45ºC
Operating humidity
20% to 80%
Storage temperature Storage humidity
-10ºC to +60ºC 20% to 95%
Supplied accesories
116cm USB-A USB-C cable
WiFi band
2.4GHz/Channels 1-13 with dynamic allocation
Camera input voltage Camera consumption
DC 5V (USB C) 450mA – 800mA
Battery Type
Li-Polymer
Battery Capacity
3.7V/1500mAh
Battery Life
300 cycles
Battery autonomy Battery charging time Low battery warning WiFi Dongle input voltage
Up to 3h Up to 3h 25′ ± 5′ DC 5V (USB A)
WiFi Dongle consumption Less than 300mA/5V
ANNEX
Windows Driver: Sharpness: Not available White Balance: Always in automatic, unchecking the box “auto” still remains in auto. Gain: Not available
Focus: Does not apply in this case Exposure: Always in automatic, unchecking the box “auto” still remains in auto Zoom: Up to 2X in 9 steps Backlight compensation: Not available
Concepted & designed in EU I Copyright © 2017 All rights reserved – www.laiatech.com
Home - Laia
