Minka Lavery 2494-572 Highland Crossing 4-light Polished Nickel And Coal Antler Chandelier Instruction Manual

2494-572 Highland Crossing 4-Light Polished Nickel and Coal Antler Chandelier

Product Information:

The product is a lighting fixture with item number 2494-572 and
the manufacture date of July 27, 2021. The fixture comes with a
mounting plate, canopy, candle covers, glass shades, and four
candelabra base bulbs (not included). It is recommended to use CFL
or LED bulbs up to 60 watts each. The fixture has wires for
connection, including black or smooth wires for the fixture, white
or ribbed wires for neutral, and bare copper wires for grounding.
The installation process is detailed in the user manual.

Product Usage Instructions:

1. Turn off the power at the fuse box or circuit breaker box.
2. Remove the old fixture and its mounting hardware.
3. Unpack the new fixture and lay out all the parts.
4. Connect the electrical wires as shown in Fig. 2, ensuring all
   wire connectors are secure. If the junction box has a ground wire,
   connect it to the fixture’s ground wire. Otherwise, connect the
   fixture’s ground wire directly to the mounting plate using the
   green screw provided. Tuck wire connectors neatly into the junction
   box.
5. Place the canopy over the mounting plate and secure it with
   screws.
6. Place the candle covers over the sockets.
7. Place the glass shades on the cups.
8. Install four candelabra base bulbs up to 60 watts each or CFL
   or LED equivalent (not included) in accordance with the fixture
   specification. Do not exceed the maximum wattage rating.
9. The installation is now complete. Return power to the junction
   box and test the fixture.

Note: The illustration in Fig. 1 is for installation purposes
only and may or may not be identical to the fixture purchased.

INSTALLATION INSTRUCTIONS

Item#2494-572 (NEW. 07/27/2021)
READ AND SAVE THESE INSTRUCTIONS
WARNING! SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER.

AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.

PREPARATION (Fig.1&Fig. 3) 1. Shut off power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts
in a clean area. Take care not to misplace any small parts necessary for installation. 3. Thread rod (I) onto all thread (J) on top of fixture body and thread coupling (C) over the all thread on rod(I). 4. Determine the desired hanging height and thread rods (F1, F2 and F3) to all thread on rod (I). Screw loop (H1) onto rod (F1). Carefully feed wire through each rod as you assemble. 5. Attach quick link (G) to loop (H1) and loop (H2) on canopy (D). Carefully feed wire through loop (H1), quick link (G), and loop (H2). 6. Attach mounting plate (A) to the junction box (Not included) with mounting screws (B) (Size: #8-32N*L0.5″). The side of the mounting plate (A) marked “GND” must face out.
CONNECTING THE WIRES (Fig. 2) 7. Connect the electrical wires as shown in fig 2, making
sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided. 8. Tuck wire connectors neatly into the junction box.
COMPLETING THE INSTALLATION (Fig. 1) 9. Place canopy (D) over mounting plate (A) and secure with
screws (E). 10. Place candle covers (M) over sockets (L). 11. Place glass shades (O) on the cups (K). 12. Install (4) four candelabra base bulbs (N) up to 60 watts
each or CFL or LED equivalent (not included) in accordance with the fixture specification. — DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!)

Fig. 1 Set#A-021-132SQ -Mounting plate -Ground screw -Mounting screw*2
Rod#W30-1-613*1(F1) W30-1-613*2(F2) W30-H-613*1(F3)
J

A B D
E H2 G H1
F1

F2 O

N F3

C

M

I L
K

Your installation is now complete. Return power to the junction box and test the fixture.

Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Candle cover#CCV24085P-613

Fig. 2
FIXTURE WIRES Black or Smooth

FIXTURE WIRES White or Ribbed

FIXTURE WIRES Bare Copper (Ground)

HOUSE WIRES Black (Hot)

HOUSE WIRES White (Neutral)

HOUSE WIRES Green (Ground)

Page: 1/2

LA-3474E

Fig.3

A B D
E H2 G H1
F1

a. Hardware Bag: A. Mounting Plate *1 B. Mounting Screw*2 D. Canopy *1 E. Screw*2 G. Quick Link*1 H. Loop*2
b. Hardware Bag: F1. ROD 12″*1 F2. ROD 12″*2 F3. ROD 6″*1

A

B

D

E

G

H

F2

F3

F1

Page: Page: 2/2

LA-3474E