Nathan James 13111 Mable Farmhouse Bathroom 31 Inch 3-lights Vanity Light Fixture Instruction Manual

• Inspect the wire insulation for any cuts, abrasions, or exposed
  copper that may have occurred during shipping. If there is a defect
  in the wire, do not attempt installation; contact Customer
  Happiness team at [email protected] or 1-866-619-1004.
• Risk of Electric Shock: Improper handling or installation of
  the product can result in electric shock. Consult a qualified
  electrician if you have any electrical questions.

Let’s build the
Mabel Bathroom Vanity
SKU 13111
0 MINUT
20
SSEMBL

2 Y

E A

Scan me!
Inspiration Digital Instructions Free Lifetime Warranty

22-0606

Ok, let’s get rolling
This should be easy, just follow our instructions and you will be back to Netflix in no time.
Estimated time for assembly
20:00
What you need · Your favorite snack or energy bar
(Save the bubbly for once your fixture is safely installed!) · Use the packaging carton as a working surface to prevent product damage during assembly
Do not use a drill

What’s included

Description

Qty

A Fixture

1

B Mounting Plate

1

C Finial Cap

2

D M4*25mm Mounting Screws

2

E Wire Nuts

3

F Metal Shade

3

Toll-free at 1-866-619-1004 [email protected] Nathanjames.com/help

Scan me!
Inspiration Digital Instructions Free Lifetime Warranty
2

Safety first, fun later

Safe use of this product starts with you.

Do not modify the structure of this product in any way.

Use this light fixture responsibly with the primary concern for your safety. Follow assembly instructions carefully and inspect product upon receipt and each use.
Nathan James and its parent companies cannot be held legally responsible for any injuries or death resulted from failure to follow instructions or improper use of this product.

Our products have been tested to meet specific safety measures as they were originally intended to be sold. Any modifications will present the risk of creating significant safety issues which Nathan James will not be responsible for.

Proper use

DO NOT DO NOT DO NOT DO NOT DO NOT

use for commercial purposes leave spilled liquid on fixture use light fixture if damaged make temporary repairs use outdoors

WARNING
Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have occurred during shipping. If there is a defect in the wire, do not attempt installation. Please reach out to our Customer Happiness team at [email protected] or 1-866-619-1004

WARNING: RISK OF ELECTRIC SHOCK
Before starting the installation, disconnect the power by turning off the circuit breaker or by removing the appropriate fuse at the fuse box. Turning the power off at the switch is NOT SUFFICIENT to prevent electrical shock. PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY ELECTRICAL QUESTIONS.

3

The goods
A

B

C

D

E

F

IMPORTANT 1. Do not tighten bolts / screws completely until all bolts / screws are lined up and inserted into holes. 2. Do not over tighten screws and bolts to avoid stripping. 3. Please use hand tools to assemble this product. Do not use power tools.
4

Pre-Installation
· Read all instructions prior to beginning assembly. · To avoid damaging this product, assemble it on a soft, non-abrasive sur-
face such as carpet or cardboard. · Keep the receipt and these instructions for proof of purchase. · Use 3 Type A or Type ST Vintage Bulbs or 13W LED Bulbs (not included). · 120V 60Hz AC Only

Step 1

Woohoo, it’s time to get started! Don’t worry, this should be quick and easy–you’ll be back watching Netflix in 20 minutes.

First, remove the Mounting Plate

(B) from Fixture’s (A) backplate by

removing the Finial Caps (C).

B

A C

5

Step 2
Next, secure the Mounting Plate (B) to the electrical box using the Mounting Screws (D).
Helpful tip: Righty-tighty, lefty-loosey!
Step 3
Install horizontal support tubes to the back of the Fixture Body (A) by threading them into place.
A
6

Step 4
Install the fixture back plate. Be sure to take notice of how the ground wire with lug must be installed.
Step 5
Wrap the ground wire from the Fixture (A) around the grounding screw on the Mounting Plate (B) and secure in place with a screwdriver.
7

Step 6
Use Wire Nuts (E) to connect the matching colored wires (white to white, black to black and ground to ground). Once complete, tuck the excess wire into the electrical box.
Note: Be sure that you are only making the connections to a 120V AC 60Hz circuit. If you do not have a pre-existing electrical box, we strongly advise using a certified electrician.
8

Step 7
Secure Fixture (A) to screws on the mounting plate with Finial Caps (C). Be sure to tuck all of the excess wires into the electrical box.

Thread in or out to adjust for proper threading length to properly fasten the finial
caps on

9

Step 8

Install the three Metal Shades (F) to the Fixture (A) with the shade ring collar on the outside of each socket assembly.

And voila, you’re all done! Now you just

need to screw in some bulbs (see the pre-

installation instructions on page 5 for our

A

recommendations) and let there be light!

F

F

F

Shade ring collar

Troubleshooting

Bulb (not included)

Problem

Possible Causes

The bulb will not light.

The bulb is burned out.

The power is off.

The fuse blows or circuit breaker blows when the light is turned on.

The circuit breaker is off. There is an exposed wire.

Solutions
Replace the light bulb.
Ensure the power supply is on.
Ensure the circuit breaker is in the ON position. Discontinue use of the light. Contact a qualified electrician or reach out to our Customer Happiness team at [email protected] or 1-866-619-1004.

10

Questions? Don’t worry, we’ve got the answers

What other light bulbs can fit in this light?
The bulb must not be greater than the max wattage for the fixture. It must match the base size, and the diameter of any area of the bulb should be less than diameter of any area of shade, so that it can fit.
Can I use an LED light bulb?
Yes, so long that the base size matches and the diameter of any area of bulb is less than diameter of any area of shade, so that it can fit.
Is this UL/ETL certified?
Yes, all our products are either UL or ETL.
Do I need an electrician to set up the hardwire?
We recommend using a certified electrician for all hardwiring, although all of our fixtures can be set up without an electrician, as long as you are replacing an existing fixture or have an existing junction box ready for a fixture installation. ENSURE POWER IS OFF WHEN INSTALLING. For all new constructions, please use a certified electrician.

Is this light compatible outside North America?
Our lighting is only warranted in Canada and the United States.
What do I do if the product is not working?
Try a different light bulb and confirm proper installation.
Can these lights work on a dimmer?
Dimmability is related to the light bulb and the wall switch, not the light fixture. All our hardwire fixtures are compatible with dimmable light bulbs. We recommend using a dimmer switch, as it extends the life of the bulb and allows for energy saving and great ambiance. If using a LED bulb, please ensure both your LED bulb and dimmer switch are compatible.
Can I use the fixture outdoors?
For vanity light fixtures, we have a damp rating, which approves the use in bathrooms or other damp areas, but is not approved for outdoor use unless specified.

Can I retrofit this hard-wired to a plug-in or vice-versa?
Yes, a plug-in fixture can be turned into a hardwire fixture and a hardwire fixture can become a plug-in fixture. For many products we will provide all the necessary hardware to make these changes, if not, you will need to purchase the necessary hardware.

11

No heartburn, when we handle the return
Give us a call 1-866-619-1004 or shoot us a message at [email protected] we will issue you a free replacement with zero hassle.

Our way
Give us a call Replacement You

Their way
Re-package item Schedule pick up Track package Replacement You

We really don’t want you to go through the hassle of re-packaging your item and sending it back, because let’s be honest…nobody has time for that.

12

We are only in business if you’re happy
For starters, thanks for being you.
Toll-free at 1-866-619-1004 [email protected] NathanJames.com/help
We do our best to ensure your furniture arrives without any problems, but occasionally mistakes happen–as humans we are imperfect beings. In the event that a part is damaged or missing, we will be more than happy to provide you with replacement part(s) for free.
Warranty This product comes with a lifetime warranty from the date of purchase. Please use your phone to scan the QR code to register your product or visit https://goo.gl/i9dk3q
Did we do alright? Please spread the love! If you are happy with your product, tell your friends and family about us or even better leave us a review online. Spreading the word gives us the opportunity to make more people happy and keep our prices low for your next purchase.
Brooklyn Burdon
Founder, Nathan James
13

References

• Support : Nathan James
• Product Warranty | Nathan James