513-GA Three Light Chandelier
Product Information
Model: #513-GA
Usage: Hanging or Ceiling Mount
Recommended Bulb: 3 Candelabra Base Bulbs
Wattage: 40 Watts Recommended, 60 Watts
Maximum
Dry Rated: Yes
Product Usage Instructions
- Feed the wires through the stem/swivel/loop.
- Attach the stem assembly onto the light cluster.
- Attach the swivel/loop assembly onto the stem.
- Place the top metal band ring over the top of the white cloth
shade. - Hang one end of the decorative chain onto the hook on the loop
assembly. Hang the other end to the hook inside the shade. Repeat
for the other two decorative chains. - Place the candle sleeve onto the socket, and insert the
recommended bulb (not included). - Hang the metal ball A onto the bottom of the fixture.
- If installing as a ceiling mount, remove the loop from the loop
assembly. Place the canopy over the nipple and secure it with a
hexnut.
Note: Use LED bulbs for extended use.
ASSEMBLY INSTRUCTION MODEL #513-GA
FOR HANGING
20″
A 14″
FOR CEILING MOUNT
A A=
You will need 3 -Candelabra Base Bulb
40 Watts Recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE
THIS FIXTURE IS DRY RATED
How to install
1.Feed wires through stem/swivel/ loop.
2.Attach the stem assembly onto the light cluster.
3.Attach the swivel/loop assembly onto the stem.
4.Put the top metal band ring over the top of the white cloth shade.
5.Take one end of the decorative chain and hang it onto the hook on the loop assembly. Hang the other end to the hook inside the shade. Repeat for the other two decorative chains.
6.Place the candle sleeve onto the socket, and insert recommended bulb (not included).
7.Hang the metal ball “A” onto the bottom of the fixture.
8.If installing as a ceiling mount, remove the loop from the loop assembly. Place the canopy over the nipple and secure it with a hexnut.
Hangings
A.1 Set. (1)10mm + (1)40mm
PART NUMBER MODEL #513-GA
Outlet Box
A
A. (1) – Mounting Hardware
B. (1) – Canopy(W5″,H0.75″) #XRE513GACAN5IN
C. (1) – Decorative Metal Leaves1
D. (1) – Decorative Metal Leaves2
B C
E. (2) – Ball Nut #XRE513GABANUT F. (1) – Fixture Loop #XRE513GALOOP
D
G. (2) – Quick Link
E
H. (1) – Hanging Chain(72″,3.4mm) #XRE513GACHA3.4MM
F
I. (1) – Loop Assembly
G
J. (1) – Center Stem(11.06″,9.7mm) #XRE513GASTEM K. (3) – Decorative Chains(each9″,3mm) #XRE513GADECHA3MM
L. (1) – Top Metal Band Ring
H
M. (1) – White Cloth Shade(W13.78″,H6.5″) #XRE513GASHA14IN
N. (3) – Candle Sleeve(W0.87″,H1.97″) #XRE511GACDL2IN
O. (1) – Bottom Metal Band Ring
I
J K
L
M N O
