DEL-90806-MK Six Light Chandelier
Product Information
The model number of this product is DEL90806MK. It is
manufactured by Crystorama.com. The fixture is dry rated and is
designed to be used with 6 candelabra base bulbs. It is recommended
to use 40-watt bulbs, with a maximum wattage of 60 watts. LED bulbs
can also be used for extended use.
The product comes with various parts, including crystal sets,
mounting hardware, canopy, collar ring, collar loop, chain, fixture
loop, check ring, frame, distributor box, and center finial.
This product contains lead, which is known to the State of
California to cause cancer and/or birth defects or reproductive
harm. For more information, please visit www.p65warnings.ca.gov.
Product Usage Instructions
- Before installation, place the fixture parts on a soft
cloth-covered platform. - Install the mounting bar onto the outlet box.
- Decide the desired hanging height and adjust the chain to the
correct length. - Spread the arms out equally. Place the check ring on the top of
the fixture body and secure it with the fixture loop. - Raise the fixture up and make the wire connection. Attach the
canopy over the mounting bar and secure it with the collar
ring. - Dress the crystals as illustrated. Follow the sequence:
1-3-2-4-3-5-4-6-5-1-6-2.
Please note that all electrical components must be installed by
a licensed electrician in accordance with the National Electric
Code and the appropriate local electrical codes.
It is important to use the recommended bulb wattage and to turn
off the power before any electrical work. LED bulbs are recommended
for extended use.
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #DEL90806MK
Crystorama.com
WARNING:
101 1/2″
27 1/2″ A
E
C
From one arm to every other arm
D
B
From one arm to next arm
24″
Spread the folded arms.
2
3
B
1 C
6
5
Crystal Sets
A. 6 Sets. (2)14mm B. 6 Sets. 300mm long bead string–(10mm bead*19pcs) C. 6 Sets. 590mm long bead string–(10mm bead*37pcs) D. 1 Piece. (1)AS8-40mm Ball E. 1 Piece. 530mm long bead string–(10mm bead*35pcs)
Electrical Danger Turn Power Off
All electrical components must be installed by a licensed electrician in accordance with the National Electric Code and the appropriate local electrical codes
You will need 6- Candelabra Base Bulb
40 Watts recommended 60 Watts Max.
USE LED BULBS FOR EXTENDED USE
The fixture is Dry rated
HOW TO INSTALL:
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
1. Install the mounting bar onto the outlet box.
2. Decide the desired hanging height and adjust the chain to the correct length.
3. Spread the arms out equally. Place the check ring on the top of fixture body and secure with the fixture loop.
4. Raise the fixture up and do the wire connection. Attach the canopy over the mounting bar and secure with collar ring.
5. Dress the crystals as illustrated.
Dress Crystal Strands C in the 4 following sequence:
1
3
2
4
3
5
4
6
5
1
6
2
WARNING:This product can expose you to Lead,
which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more
information go to www.p65warnings.ca.gov
Outlet Box
A
C D
G I
J
LIGHTING THE WAY FOR SIXTY YEARS
ASSEMBLY INSTRUCTION MODEL #DEL90806MK
Part Number
Crystorama.com
B
E F
Part Numbers-For Hanging
A. (1)-Mounting hardware Wire Connector x 2. Mounting bar x 1. Lock washer x 1. Hex nut x 1. Mounting screw x 2. Thread Nipple x 1.
B. (1)-Canopy (W5″xH1 1/4″) -XSN90803MKCAN5.11IN
C. (1)-Collar Ring D. (1)-Collar Loop
E. (1)-Chain (4mmx72″) -XSN90803MKCHA4MM
F. (1)-Fixture Loop
G. (1)-Check Ring
H. (1)-Frame
I. (1)-Distributor Box
J. (1)-Center Finial
K. (6)-Crystal Bobeche ; Ø2 3/8″,H3/8″; 23mm center hole. -XSN90802BOB2.4IN
L. (6)-Candle Sleeve; Ø 7/8″, H4 1/8″ -XSN90806MKCDL4.13IN
H
(Bulb not included)
K
L
Crystorama Lighting
p65warnings.ca.gov
