HCD038/CA Bluetooth DALI Control Base
Product Information
- Product Name: HCD038/CA Detached Motion Sensor with Casambi
Enabled Mesh - Product Description: HCD038/CA is a Bluetooth DALI control base
with a built-in 30mA DALI power supply. It is compatible with a
wide range of microwave and PIR sensor heads. This product is ideal
for plastic luminaires as the Bluetooth signal can transmit through
plastic. It is suitable for various indoor applications such as
offices, classrooms, car parks, warehouses, and other
commercial/industrial areas. HCD038/CA works with the CBU-ASD
module for either 1-10V or DALI output. Commissioning and settings
can be done via the Casambi app. - Hardware Features:
- 30mA DALI broadcast output for up to 15 LED drivers
- 2 push inputs for flexible manual control
- Detached linear design to suit luminaires with limited space
inside - Use Casambi app for commissioning
- Device firmware update over-the-air
- 5-year warranty
- Technical Specifications:
- Bluetooth Transceiver:
- Operation frequency: 2.4 GHz – 2.483 GHz
- Transmission power: Max 4dBm
- Range (Typical): 10~30m
- Environment:
- Operation temperature
- Case temperature (Max.)
- IP rating
- Input & Output Characteristics:
- Mains voltage: 220~240VAC 50/60Hz
- Stand-by power
- Bluetooth Transceiver:
Product Usage Instructions
- Ensure the HCD038/CA Detached Motion Sensor is properly
installed in the desired location. - Connect the HCD038/CA to the mains power supply (220~240VAC
50/60Hz). - Download the Casambi app from the App Store on your
smartphone. - Launch the Casambi app and follow the on-screen instructions to
set up and commission the HCD038/CA. - Configure the desired settings for your specific application
using the Casambi app. - If manual control is required, use the 2 push inputs on the
HCD038/CA. - To update the device firmware, perform an over-the-air firmware
update using the Casambi app. - For any technical support or warranty-related inquiries, refer
to Hytronik’s Standard Guarantee Policy available at
www.hytronik.com/download ->knowledge ->Hytronik Standard
Guarantee Policy.
Detached Motion Sensor with
HCD038/CA
Casambi Enabled
Mesh
Product Description
HCD038/CA is a Bluetooth DALI control base with 30mA DALI power supply
built in, it can work with a wide range of microwave and PIR sensor heads. It
is ideal for plastic luminaires as compared to metal luminaires because
Bluetooth signal can transmit through plastic. It is suitable for any typical
indoor applications such as office, classroom, car park, warehouse and other
commercial/industrial areas. HCD038/CA works with CBU-ASD module for
either 1-10V or DALI output. Meanwhile, all commissioning and settings can
be done via
app.
Hardware Features
30mA DALI broadcast output for up to 15 LED drivers 2 push input for flexible manual control Detached linear design to suit luminaires with limited space inside Use Casambi app for commissioning Device firmware update over-the-air 5-year warranty
Free smartphone App for set-up and commissioning
Download on the
App Store
Technical Specifications
Bluetooth Transceiver Operation frequency Transmission power Range (Typical )
2.4 GHz – 2.483 GHz Max 4dBm 10~30m
Environment Operation temperature Case temperature (Max.) IP rating
Ta: -20°C ~ +55°C Tc: +75°C IP20
Input & Output Characteristics
Mains voltage
220~240VAC 50/60Hz
Stand-by power
<0.5W
Warming-up
20s
Load ratings
30mA (max. 15 devices)
Subject to change without notice.
Edition: 14 Jan. 2022 Ver. A2 Page 1/7
30
Mechanical Structure & Dimensions
HCD038/CA
RJ12 connector
Bluetooth module
PUSH
120
21
Wire Preparation Wiring Diagram
N L
0.75 – 2.5 mm 8mm
110.5
Ø 4.5
4.5
To make or release the wire from the terminal, use a screwdriver to push down the button.
SAM20
PUSH N L
L N
Technical Specifications for Sensor Heads
PIR Sensor Properties
Sensor principle Operating voltage
PIR detection 5VDC
Detection range *
HIR05 & HIR05/FM HIR05/AA & & HIR07
Max installation height3mMax detection range6m (diameter)
HIR11
Max installation height15m (forklift); 12m (single person); Max detection range24m (diameter)
HIR12
Max installation height15m (forklift); 12m (single person); Max detection range18m*6m (L*W)
HIR63 HIR63/R
Max installation height3m;Max detection range12m (diameter) Max installation height12m (forklift); 8m (single person);Max detection range14m (diameter)
Subject to change without notice.
Edition: 14 Jan. 2022 Ver. A2 Page 2/7
HF Sensor Properties
Sensor principle Operating voltage
High Frequency (microwave) 5VDC
Operation frequency Transmission power
5.8GHz +/- 75MHz <0.2mW
Detection range *
SAM20 & SAM21 SAM22 & SAM22/AA
SAM23
Max installation height3m; Max detection range12m (diameter)
Max installation height15m (forklift); 12m (single person); Max detection range20m (diameter)
* The detection range is heavily influenced by sensor placement (angle) and different walking paces. It may be reduced under certain conditions.
PIR & microwave sensor heads
The range of PIR and microwave sensor heads below offers powerful number of Plug’n’Play feature options to expand the flexibility of luminaires design. This approach to luminaire design reduces space requirements and component costs whilst simplifying production.
23.3
2.5 30
A. HIR05 PIR sensor head The cable length is around 30cm.
Lens Installation hole RJ12 connector
30 35 39.5
1.5 16
B. HIR05/FM PIR sensor head The cable length is around 30cm.
Lens Accessories RJ12 connector
Ø48 38.9
20.3 21.5 26.5 35.3
Installation hole
Ø41
25.8
C. HIR05/AA
PIR sensor head Adjustable angle The cable length is around 30cm.
85 72
Ø89.5 75
Installation hole
Ø78
D. HIR07
PIR sensor head Photocell AdvanceTM The cable length is around 30cm.
Lens RJ12 connector
E. HIR11/S
PIR sensor head Surface mounting For highbay application IP65 (facia / lens part) The cable length is around 30cm.
Lens Housing RJ12 connector
Subject to change without notice.
Ø13.8
16.4 17 19.3 17.8 15.9 12.9
40.9 44.5
Ø36.3
Installation hole
Lug
Edition: 14 Jan. 2022 Ver. A2 Page 3/7
20 23.2
32.6 17
Ø1Ø7.3.55
F. HIR11/F
Lens Accessories
PIR sensor head
Flush mounting
Ø48
For highbay application
IP65 (facia / lens part) The cable length is around 30cm.
RJ12 connector
1.2 21.5
30.4 Ø41
Installation hole
G. HIR11/C PIR sensor head Screw to the luminaire by conduit For highbay application IP65 (facia / lens part) The cable length is around 30cm.
H. HIR12 PIR sensor head For highbay application IP65 (facia / lens part) The cable length is around 30cm.
Lens Accessories
RJ12 connector
Ø40.5
M13
12 42.7 63
25 25 33.9
Ø14
Installation hole
Lens Accessories
RJ12
16.5 38.2
Installation hole
63
Ø33
45
27.5
33
75
49.5
Installation for HIR12
Thickness: 0.8mm 1.6mm
We suggest that the metal plate thickness to be 0.8mm 1.6mm to ensure perfect focal length for the PIR lens.
I. HIR63 PIR sensor head The cable length is around 30cm.
Ø 26
RJ12
J. HIR63 with HA04 PIR sensor head Optional accessory The cable length is around 30cm.
K. HIR63 with HA05 PIR sensor head Optional accessory The cable length is around 30cm.
RJ12
Ø 15 52
RJ12
Ø 15 68
27 22
21.7 21.7
22.4 31.7
25 33.3
22.4 31.8
Installation hole
Ø
+ 22.23 –
0.78 0.41
Installation hole
R2.3±0.1
17.2±0.1
44.2±0.1
Installation hole
Max R0.5
22±0.2
60±0.2
Subject to change without notice.
Edition: 14 Jan. 2022 Ver. A2 Page 4/7
L. HIR63/R PIR sensor head IP65 (facia / lens part) The cable length is around 30cm.
M. SAM20 HF sensor head Photocell AdvanceTM The cable length is around 30cm.
N. SAM21 HF sensor head IP65 The cable length is around 30cm.
O. SAM22 HF sensor head Flush mount The cable length is around 30cm.
P. SAM22/AA HF sensor head Adjustable angle The cable length is around 30cm.
RJ12
34.7 35.9 40.4
HF antenna module
2.5 6.6
25.2 24.3
15.5
Ø 36
Cable side entry
Ø4 2.5
25
Ø41
1.5 13 8.8 6.8
21.7 11.2
Ø48
Ø89.5 75
81 72
13.9 40.3
22.7 34 43.4
Installation hole
Ø
+ 22.23
0.78 – 0.41
Ø4.5 Cable back entry
M16 14.6
38.9
1.2 21.5 26.5
Installation hole
Ø78
45.2 2.5 33.5 50.2 26.5 2 9
Q. SAM23 HF sensor head Photocell advanceTM For highbay application The cable length is around 30cm.
Detection Pattern
SAM23 0
Infrared remote receiver
15
Slots for T8 tube
12
Photocell advanceTM Daylight sensor
32.2
Slots for T5 or T8 tube
SAM20 & SAM21 & SAM22 & SAM22/AA
10
0
6
Ceiling mounted height(m)
Ceiling mounted height (m)
10% 30% 50% 75%
15
Ceiling mounted detection pattern (m)
Subject to change without notice.
10% 30% 50% 75%
3
Ceiling mounted detection pattern (m)
Edition: 14 Jan. 2022 Ver. A2 Page 5/7
HIR05 & HIR05/FM & HIR05/AA & HIR07
HIR63
3m
Radial movement 4m Tangential movement 6m
3m
HIR12
Up to 4m Up to 5m
3m 5m
12m 15m
*for forklift
HIR63/R
3
Up to 8m Up to10m
Up to12m Up to 18m
Up to 6m
Up to 6m
8m (person) 10m (forklift)
Tangential movement up to 12m
Tangential movement up to 10m
*The detection patterns are based upon 5km/h movement speed.
HIR11 Series (High-bay)
HIR11series: High-bay lens detection pattern for forklift @ Ta = 20OC (Recommended installation height 10m-15m)
A: Tangential movement B: Radial movement
h = max.15m ”
Tangential: max. 24m
h = max.15m
# Radial: max. 16m
insensitive
sensitive
insensitive
sensitive
Mount height 10m 11m 12m 13m 14m 15m
Tangential (A) max 380m2 (Ø = 22m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m) max 452m2 (Ø = 24m)
Radial (B) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 201m2 (Ø = 16m) max 177m2 (Ø = 15m) max 133m2 (Ø = 13m) max 113m2 (Ø = 12m)
Subject to change without notice.
Edition: 14 Jan. 2022 Ver. A2 Page 6/7
HIR11 series: High-bay lens detection pattern for single person @ Ta =20OC
(Recommended installation height 2.5m-12m)
A: Tangential movement
B: Radial movement
h = max.12m
”
Tangential: max. 20m
h = max.12m
#
Radial: max. 3m
insensitive
sensitive
insensitive
sensitive
Mount height 2.5m 6m 8m 10m 11m 12m
Tangential (A) max 50m2 (Ø = 8m)
Radial (B) max 7m2 (Ø = 3m)
max 104m2 (Ø = 11.5m) max 7m2 (Ø = 3m) max 154m2 (Ø = 14m) max 7m2 (Ø = 3m)
max 227m2 (Ø = 17m) max 7m2 (Ø = 3m) max 269m2 (Ø = 18.5m) max 7m2 (Ø = 3m) max 314m2 (Ø = 20m) max 7m2 (Ø = 3m)
Additional Information / Documents
1. Regarding precautions for Bluetooth product installation and operation, please kindly refer to www.hytronik.com/download/knowledge ->Bluetooth Products – Precautions for Product Installation and Operation
2. Data sheet is subject to change without notice. Please always refer to the most recent release on www.hytronik.com/products/Bluetooth 5.0 SIG mesh system ->Partnership
3. Regarding Hytronik standard guarantee policy, please refer to www.hytronik.com/download ->knowledge ->Hytronik Standard Guarantee Policy
Subject to change without notice.
Edition: 14 Jan. 2022 Ver. A2 Page 7/7
Catalogue_Hytronik
