MOUNT-TV01LB Loft Bed TV Mount
Product Information:
Product Name: Loft Bed TV Mount
SKU: MOUNT-TV01LB
Weight Capacity: 44lbs (20kg)
Manufacturer: VIVO
Manufacturer Contact:
- Website: https://vivo-us.com/products/mount-tv01lb
- Email: [email protected]
- Phone: 309-278-5303
- Support Hours: Monday-Friday from 7:00am-7:00pm CST
Product Usage Instructions:
- Step 1: Assemble the VESA Brackets (C) to the
VESA Plate (B) using the provided M6x12mm Carriage Bolts (S-D) and
M6 Nuts (S-C). Use the Wrench (T-A) to tighten the bolts. Note that
for VESA patterns of 200x200mm and lower, do not use the VESA
Brackets (C). - Step 2: Depending on whether you have a flat
back or curved back monitor, assemble the VESA Plate (B) with the
VESA Brackets (C) using the provided screws and washers. For flat
back monitors, use M6x14mm Screws (M-A) or M8x16mm Screws (M-B)
with M8 Washers (M-E). For curved back monitors, use M6x30mm Screws
(M-C) or M8x35mm Screws (M-D) with M8 Washers (M-E) and Spacers
(M-F and/or M-G). - Step 3: Place the Hanger (A) onto the VESA
Plate (B) at the desired height. - Step 4: Assemble the Hanger (A) to the VESA
Plate (B) using the M6 Nuts (S-C) and the Wrench (T-A). - Step 5: Thread the Clamp Screws (S-A) into the
Hanger (A) and place the Screw Caps (S-B) on the ends of the Clamp
Screws (S-A). Optionally, use the Pads (D) to prevent the Hanger
(A) from touching or resting against a hard surface. - Step 6: Place the Hanger (A) over the loft bed
frame and tighten the Clamp Screws (S-A) to secure the assembly in
place. Note that the maximum clamping thickness is 1.25″
(32mm).
Note: Some hardware included may not be used. Do not exceed the
weight capacity of 44lbs. Failure to do so may result in serious
injury.
If you have any further questions or need assistance, you can
contact VIVO’s support team through their website, email, or
phone.
Loft Bed TV Mount
Instruction Manual
SKU: MOUNT-TV01LB
Scan the QR code with your mobile device or follow the link for helpful videos and specifications related to this product.
Loft Bed TV Mount
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
www.vivo-us.com Chat live with an agent!
309-278-5303
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS – NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
PACKAGE CONTENTS
A (x1) Hanger
B (x1) VESA Plate
C (x4) VESA Brackets
D (x2) Pads
S-A (x2) Clamp Screw
S-B (x2) Screw Cap
S-C (x7) M6 Nut
S-D (x4) M6x12mm Carriage Bolt
M-A (x4) M6x14mm Screw
M-B (x4) M8x16mm Screw
M-C (x4) M6x30mm Screw
M-D (x4) M8x35mm Screw
M-E (x4) M8 Washer
M-F (x4) Small Spacer
M-G (x4) Large Spacer
T-A (x1) Wrench
TOOLS NEEDED
Phillips Screwdriver
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
DO NOT EXCEED WEIGHT CAPACITY.
44lbs
Failure to do so may result in serious injury.
(20kg)
2
ASSEMBLY STEPS
STEP 1
Assemble VESA Brackets (C) to VESA Plate (B) in the appropriate configuration to fit your TV’s VESA pattern using M6x12mm Carriage Bolts (S-D) and M6 Nuts (S-C). Tighten using Wrench (T-A). NOTE: For 200x200mm and lower, do not use VESA Brackets (C).
300x300mm, 400x400mm
S-C
T-A
S-D 400x200mm, 300x400mm
B C
400x300mm 3
STEP 2
OPTION A: Flat Back Monitor For flat back monitors, assemble VESA Plate (B) with VESA Brackets (C) using M6x14mm Screws (M-A) or M8x16mm Screws (M-B) with M8 Washers (M-E) and a Phillips screwdriver.
B C
M-A M-B
M-E
OPTION B: Curved Back Monitor For curved back monitors, assemble VESA Plate (B) with VESA Brackets (C) using M6x30mm Screws (M-C) or M8x35mm Screws (M-D) with M8 Washers (M-E) and Spacers (M-F and/or M-G). Tighten using a Phillips screwdriver.
B
C
M-D M-E
M-E
M-G
M-D M-E M-E
M-F M-G
4
STEP 3
Place Hanger (A) onto VESA Plate (B) at the desired height. A
B
5
STEP 4
Assemble Hanger (A) to VESA Plate (B) using M6 Nuts (S-C) and Wrench (T-A). S-C T-A
A
B
STEP 5
Thread Clamp Screws (S-A) into Hanger (A). Place Screw Caps (S-B) on the ends of Clamp Screws (S-A).
A
S-A
S-B D
OPTIONAL: Pads (D) have been provided for mounting locations where Hanger (A) will touch or rest against a hard surface when mounted. Peel and remove backing from Pads (D) and install on back of Hanger (A) above both sets of screws, as shown above.
6
Loft Bed Frame Loft Bed Frame
STEP 6
Place Hanger (A) over loft bed frame and tighten Clamp Screws (S-A) to secure the assembly in place. NOTE: Max clamping thickness is 1.25″ (32mm).
A S-A
7
Love your new VIVO setup and want to share? Tag us in your photo! @vivo_us
LAST UPDATED: 06/13/2023 REV1.1
Open Monday – Friday 7:00am – 7:00pm CST, our dedicated support team can offer immediate assistance with rapid response times. If any parts are received damaged or defective, please contact us. We are happy to replace parts to ensure you have a fully functioning product.
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within office hrs): < 15 M
309-278-5303
AVG. RESOLUTION TIME (within office hrs): 5M 4S
AVG. RESPONSE TIME (within office hrs): 1HR 8M – 23% within < 15m – 38% within < 30m – 61% within < 1hr – 83% within < 2hr – 92% within < 3hr
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Register a .US.COM domain today!
VIVO - Desks, Monitor Mounting, and More Home & Office Solutions – VIVO - desk solutions, screen mounting, and more
Loft Bed TV Mount – VIVO - desk solutions, screen mounting, and more
