QUICK START GUIDE
200960
2000W Dual Fuel Inverter Generator
WARNING:
Read the ENTIRE operator’s manual to become familiar with the features of the product before operating.
Failure to operate the product correctly can result in damage to the product, personal property and cause serious injury or even death.
www.championpowerequipment.com
© Champion Power Equipment 2020.
All Rights Reserved. / Todos los derechos reservados.
Set Up 
1. Open shipping carton. 
Assembly > Unboxing
2. Add oil. Assembly > Add Engine Oil.
Recommended: 10W-30, up to 16.9 fl. oz. (500 ml) DO NOT overfill.
3. Move the generator outdoors.
| Move generator to an open, outdoor area. Point exhaust away. Never run generator in enclosed areas (e.g., not in house or garage). | Keep all objects at least 5 feet (1.5 m) from generator. Heat from the muffler and exhaust gas can ignite combustible materials. |
 |  |
4. Add fuel. Assembly > Add Fuel: Gasoline
DO NOT use E15 or E85
or
Connect propane cylinder. Assembly > Add Fuel: Propane (LPG)
Start Up 
5. DO NOT plug in any electrical devices.
NEVER START OR STOP THE GENERATOR WITH ELECTRICAL DEVICES CONNECTED OR TURNED ON!
6. For Gasoline Operation
Turn the fuel cap vent lever to the “ON” (|) position.
For Propane Operation
Open the propane tank valve.
7. Turn the EZ Start dial to the “CHOKE” position.
8. For Gasoline Operation
Pull the recoil to start the engine.
For Propane Operation
Pull the recoil 3-5 times to prime the engine.
9. For Gasoline Operation
Turn the EZ Start dial to the gasoline “RUN” position.
For Propane Operation
Turn the EZ Start dial to the propane “RUN” position.
10. For Propane Operation
Pull the recoil to start the engine.
11. Plug in. Operation > Connecting Electrical Loads.
Visit our Youtube channel to watch our how-to videos and subscribe to view our latest videos on our champion Power Equipment products!
NEED ASSIStANcE Or HAVE A QUEStION?
GIVE US A CALL.
1•877•338•0999
