*The trigger on handle must be depressed to produce spray
- Clean water tank on back of machine should be full
- Remove tank by pulling up and inspect it for any cracks or leaks
- If tank is cracked or leaking, a replacement should be ordered
- With your water tank removed, check for damage on cap
- If cap is damaged, a replacement should be ordered
- Firmly push clean water tank back on machine
- It should click into place
- Plug in machine
- Hold spray trigger down for 10-15 seconds to prime and test for spray
- You should see solution bubbling under nozzle
- Select clean shot button and test for spray from clean shot nozzle
- If still no spray, unplug machine
- Remove nozzle by pulling up on both sides
- Check for clogs in spray tips on foot of machine
- Probe spray tips with a paperclip to clear away any clogs
- Before reattaching nozzle, check for spray in spray tips
- Plug machine in and push express cleaning mode
- Depress trigger, water should flow from spray tips
- If water flows from spray tips, turn machine off and unplug
- Reattach nozzle by lining up tabs on the front edges of the foot – push the window into place until a click is audible
- Depress trigger to test for spray
- If spray came out of spray tips, but not nozzle, nozzle should be replaced
- If there was no spray from the spray tips, Contact Us
