- Power off machine and unplug
- Remove clean water tank
- Fill clean water tank if empty and securely attach the cap
- Check tank and cap for any cracks or damage
- If there are cracks or damage on either tank or the cap, a replacement should be ordered
- Install clean tank back onto machine, press down until secure with no gaps between machine and tank
- Plug machine in, power it on and test for spray
- Remove any tools attached to hose
- Turn machine on and hold the end of hose, without the tool, over a cloth
- Press trigger and test for spray coming from spray tip
- If machine sprays without tool attached clean tool with a cloth or soft bristled brush
- Check for cracks or damage to tool
- If tool is cracked or damaged a replacement should be ordered
- If machine does not spray without tool attached clean the spray tip with a paperclip to remove any clogs
- Put the tool back on machine and test for spray
If there is still no spray, Contact Us
