- Remove BarkBath tool
- Place unit on an elevated flat surface (ex. table, counter)
- Fill clean water tank with warm water
- Turn machine on
- Extend hose downward toward a mat, cup, or bowl
- Push trigger for 15-20 seconds to release spray
- If water releases, turn machine off
- Fill BarkBath tool with BISSELL No-Rinse Shampoo
- Connect tool to machine
- A “click” sound should happen when the tool is properly connected to the machine
- Extend tool downward toward mat, cup, or bowl
- Push trigger until shampoo/water comes out
- Fill clean tank with warm water
- Hold tank over a sink with cap facing down
- Push on the X-valve
- Water should release
- Reset clean water tank on machine with no gaps
- With clean tank on machine and full of warm water, check to see if wand sprays
- If no spray, contact us
- If wand sprays, attach tool securely and clear any debris from end (screen) and holes on the spray tips
- If still no spray, Contact Us
