Neutrik Bda 556 V3 Powercon Cable Connector Instruction Manual

BDA 556 V3 powerCON Cable Connector

Product Information:

The product is a connector designed for electrical equipment. It
has a maximum capacity of 1 Newton and is intended for power input
and output connections.

The product is manufactured by Neutrik AG, a brand of the
Neutrik Group. The manufacturer is responsible for ensuring
conformity with applicable regulatory documents.

Approval Standards:

• VDE EN 60320-1
• UL 60320-1
• CAN/CSA-C22.2 No. 60320-1

Product Usage Instructions:

Connecting:

1. When connecting the cable, ensure that the notch on the cable
   connector matches the corresponding guide slot on the chassis.
2. Incorrect insertion may cause electrical contact misalignment,
   leading to equipment malfunction and/or personal injury.
3. After inserting the cable properly, as illustrated in AA, twist
   the cable connector clockwise to lock it in place.

Unlocking:

To unlock the connector, follow the reverse process of
connecting. Twist the cable connector counterclockwise to unlock it
from the chassis.

Application Instructions:

The connector can be used with other equipment for power input
and output connections. The following connector assignments are
applicable:

Rating:

Note: This information is based on the product
manual with draft number BDA 556, last updated on June 28,
2023.

For more information and support, please visit the Neutrik AG
website at www.neutrik.com.

R
OPERATING INSTRUCTION
powerCON® TRUE1 TOP Cable Connector

1.

CONNECTING

A

max. 1 Newton

Note: When connecting, match the notch on the cable connector to the corresponding guide slot on the chassis.
B

SAFETY WARNING
incorrect insertion may cause electrical contact misalignment resulting in equipment malfunction and/or personal injury.
C

BDA 556

Note: After inserting properly as in illustration AA ,
twist the cable
connector clockwise to
lock.

click

Note: The proper twist-lock is achieved when the silvery tab is in the position shown in CC and an audibel «click» is heard.

Page 1

powerCON® TRUE1 TOP I OPERATING INSTRUCTION

2.

UNLOCKING

A

B

C

3.

APPLICATION INSTRUCTION

Application other equipment:

· The powerCON® TRUE1® system is certified as a connector with breaking capacity according IEC 60320, VDE 0625.
· It is intended for use as an appliance coupler and interconnection coupler. · It serves to supply power to an appliance and from an appliance to other equipment. · To be installed by qualified person only.

CONNECTOR ASSIGNMENT:

APPLIANCE INLET
NAC3MPX-TOP NAC3MPX-WOT-TOP
Power IN

APPLIANCE OUTLET
NAC3FPX-TOP NAC3FPX-WOT-TOP NAC3FPX-ST-TOP Power OUT

APPLIANCE INLET / OUTLET u Combination NAC3PX-TOP
Power IN

Power OUT

NAC3FX-W-TOP (Connector)

NAC3MX-W-TOP (Plug connector)

NAC3FX-W-TOP (Connector)

NAC3MX-W-TOP (Plug connector)

powerCON® TRUE1® TOP line is full backward compatible with the preceding powerCON TRUE1 products.

Approval based:

VDE EN 60320-1

UL 60320-1 CAN/CSA-C22.2 No. 60320-1

Rating: Cable Type: Cable O.D.:

250 V ac / 16 A H05VV-F3G 1.0 mm2, Length max. 2 m H05VV-F3G 1.5 – 2.5 mm2 H07RN-F3G 1.5 mm2 6.0 – 12.0 mm

250 V ac / 20 A SJTOW, SJOOW 3 x 12 AWG 6.0 – 12.0 mm

The manufacturer of cord sets and of interconnection cord sets is responsible for the conformity assessment according to the applicable regulatory documents.

Draft. Nr.: BDA 556 V3 Update: 2023-06-28
Neutrik AG I LI-9494 Schaan www.neutrik.com

Data subject to change without prior notice. © 2023 NEUTRIK®. NEUTRIK®, powerCON are registered trademark of Neutrik AG. ALL RIGHTS RESERVED.

Page 2

A brand of the Neutrik Group

References

• Homepage - Neutrik