Mountup Mp0010-b Full Motion Tv Wall Mount Installation Guide (+ PDF)

Contents hide

MP0010-B Full Motion TV Wall Mount

Product Information

This product is a wall mount designed for use with a TV. It is
suitable for installation on wood stud or solid concrete walls. It
is important to note that it should not be installed into drywall
without wood studs.

The wall must be capable of supporting five times the weight of
the TV and mount combined to ensure proper installation. Incorrect
installation may result in product damage or bodily injury.

Additionally, this product contains small items that could be a
choking hazard if swallowed, so caution should be exercised when
handling.

Before starting assembly, it is essential to verify that all
parts are included and undamaged. If any parts are missing or
damaged, do not return the damaged item to your dealer; instead,
please contact our customer service team. It is crucial to never
use damaged parts during installation.

Product Usage Instructions

Ensure that you have a suitable wall for installation, either a
wood stud or solid concrete wall.
Check that the wall is capable of supporting five times the
weight of the TV and mount combined.
Verify that all parts are included and undamaged before
starting assembly.
If any parts are missing or damaged, contact our customer
service team for assistance. Do not use damaged parts.
Begin by attaching the wall plate unit to the wall using the
supplied hardware (lag bolt ST8x65mm, M8 washer, and open-end
wrench).
Ensure that the wall plate unit is securely fastened to the
wall.
Attach the TV brackets (E x 2) to the back of your TV using the
provided hardware.
Make sure the TV brackets are securely attached to the TV.
Align the TV brackets with the wall plate unit and securely
mount the TV onto the wall plate unit.
Double-check that the TV is properly mounted and secure before
releasing it.
Enjoy your securely mounted TV!

Please refer to the user manual for any additional information
or troubleshooting tips.

View Fullscreen

INSTALLATION INSTRUCTION

Velcro Cable Ties ×3

Bubble Level ×1

Safety Caution

Supplied Parts and Hardware

Please read this instruction carefully before installation. If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, please contact us.
This product is designed for use in wood stud or solid concrete wall. – DO NOT install into drywall WITHOUT WOOD STUDS.
The wall must be capable of supporting five times the weight of the TV and mount combined. Incorrect installation may result in product damage or body injury.
WARNING: This product contains small items that could be a choking hazard if swallowed.
Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; please contact our customer service team. Never use damaged parts!
Must Check Before Getting Started

Wall Plate Unit

D x1

Hardware (Wall / Product)

Lag Bolt ST8x65mm

M8 Washer

Open-end Wrench

TV Brackets E x2

MAX:400mm/16″

<16mm(5/8″)
Max. 16″(406mm)

Min. 8″ (203mm)

MAX: 400mm/16″

Max: 99LBS (45KG)

Drywall with wood studs Solid concrete wall
CAUTION: DO NOT install into drywall WITHOUT WOOD STUDS.

Extra Tools You Need (Not Supplied)

A x4

B x4

C x1

TV Screws / Spacers / Washers

Philips Screws M4 x 12mm M4 x 30mm

Philips Screws M6 x 15mm M6 x 30mm

Philips Screws M8 x 25mm M8 x 45mm

Spacers M8 x 10mm

Washers M6

Spacers M8 x 5mm

For Wood Studs

For Concrete Wall

Max:

Max: 400x400mm/16×16″

99LBS (45KG)

Min: 75x75mm/3×3″

YZ1204-ET-US1

7/32″ (5.5mm)

3/8″ (10mm)

Band Pencil Electrodrill

1/2″ (13mm)
Socket Screwdriver

x4 x4

If you have any questions, please feel free to contact us via Amazon.

Stud Awl Wood

Finder

Drill Bit

Masonry Hammer Drill Bit

Tape

Wrench

NOTE: Not all hardware included will be used.

STEP 1 Attach the TV Brackets

STEP 1 (Continued)

STEP 2 Attach Wall Plate to Wall

1-1 Select TV Screws. TV screws specification can be found in your TV user manual

1-3 Attach the TV Brackets

OPTION A: Wood Stud Installation

M4 M6 M8

Too Short

Too Long

Not Vertical

No!

A-1 Locate the wood studs
Max.

Min. Wood Stud Size: nominal 2″(51mm)

16″(406mm)

actual 1 1/2″(38mm)

Correct

Phillips Screwdriver

Center line

Min. Wood Stud Size: nominal 4″(102mm)
actual 3 1/2″(89mm)

1-2 With or without spacers.

Bracket

Long Screw

Washer Spacer
TV back

ME Not for M8 Screws

MA or MB or MC
TOP OF TV

MD or MF

optional

Wall before Wood Stud <16mm(5/8″)
A-2 Align & mark mounting holes with wood studs.
Bubble Level

For more spacing between bracket and TV

For raised back TV

For Counterbore of TV

No, just choose the screws, washers.

Bracket

Short Screw

Washer

TV back

To avoid the blocked input
3

5.12″ /130mm

10″/254mm 16″/406mm

STEP 2 (Continued)
A-3 Drill pilot holes
7/32″ (5.5mm)

2.75″(70mm)

STEP 2 (Continued)

OPTION B: Solid Concrete or Brick Wall Installation

B-1

Bubble Level

Min. 8″ (203mm)

STEP 2 (Continued)
B-3

Concrete wall anchor (NOT INCLUED)

10×61mm

A-4

CAUTION: To avoid potential personal

injury or property damage:

All 4 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall

plate assembly. Ensure the wall plate

assembly is securely fastened to the wall

before continuing on to the next step.

To prevent the TV falling down, the Arrow Must Keep UP at this step!!

B A
Ensure the lag bolts to be screwed into the studs tightly and securely.

No!
Install wall plate using lag bolts
and washer with Socket Wrench,
NO Electrodrill.

CAUTION: Do not use

in drywall or wood.

STEP 3 Hang and Secure TV to Wall Plate

3-1 Wall Plate Installation Integrity Test
Before hanging TV, please conduct “wall plate installation integrity test” first.

99 LBS (45KG)
3-2 Hang and Secure TV to Wall Plate
Release preassembled screws down on brackets, hang TV with brackets onto the Plate, then fasten the safety screws.

B-2
3/8″ (10mm)

2.75″(70mm)

B-4

UP
B A

CAUTION: To avoid potential personal injury or property damage: All 4 lag bolts A MUST BE firmly tightened to prevent unwanted movement of the wall plate assembly. Ensure the wall plate assembly is securely fastened to the wall before continuing on to the next step.
To prevent the TV falling down, the Arrow Must Keep UP at this step!!
No! Install wall plate using lag bolts, washer and anchor with Socket Wrench, NO Electrodrill.

STEP 4 Adjustments

DANGER

7
Product Dimensions

Leveling adjustment

If needed, TV can be leveled by ±3 degrees via adjusting the 4 nuts with the

open-end wrench C .

Loosen

435mm/17.13″
MAX:400mm/16″ MIN:75mm/3″

Tighten

8.5mm/0.33″

430mm

±3°