315533 Gemini Queen Platform Bed
Product Information
The B1563-300 GEMINI 5/0 Q PANEL BED-HB/FB/RAILS is a panel bed
that comes with a headboard, footboard, rails, bed roll-out slats,
bed slats support, and side rails. The product is made of
high-quality materials and requires assembly before use. The
package includes a parts list and a hardware list to ensure that
all items are present and accounted for.
Product Usage Instructions
- Check all packing materials for small parts that may have come
loose during shipping and identify and count all items to compare
with the parts and hardware list. - Assemble the headboard by attaching the headboard leg (C, D) to
the headboard (A) using a flat washer (3) and securing it with an
Allen key (4). Fix the other holes with Csk screw (6) as
shown. - Attach the side rail (G) and (H) to the side rail leg (J) using
JCBC bolt (1) with a flat washer (3) and securing it with an Allen
key (4) by outside side rail (G) & (H). Loosen JCBB bolt at
headboard & footboard leg using Allen Key (5) and hook set-up
side rail to headboard (A) closely and push down to fit and tighten
them accordingly. Repeat step 2.2 with the other end of the rail to
hook onto footboard (B). - Fix the bed slat support (F), bed slat (E), and center slats
(I) together using JCBC bolt (2). Install the bed slat (E) to side
rail (G) & (H) and tighten with Csk screw (6) as per diagram
shown. Repeat the process for the other set of slats assembly. - Push the side rail (G) & (H) to meet with wooden slat (E)
and fix the CSK screw (6) using the screwdriver. Push slat (E) to
the end of side rail and secure with CSK screw (6) as shown. Check
tightness of all screws every 6-8 weeks.
ASSEMBLY INSTRUCTIONS
B1563-300 GEMINI 5/0 Q PANEL BED-HB/FB/RAILS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the parts list and/or hardware list shown.
PARTS LIST
HARDWARE LIST
No
ITEM
Qty
No ITEM
Qty
A Headboard B Footboard C Headboard Leg LSF D Headboard Leg RSF E Bed Roll-Out Slats F Bed Slats Support G Side Rail Left
1 pc 1 pc 1 pc 1 pc 2 sets 4 pcs 2 pcs
1 JCBC M6 x 30mm 12 pcs
2 JCBC M6 x 50mm 4 pcs
Flat Washer 1/4″ID x
3
19mmOD Blk
12 pcs
ALLEN KEY
m4x65mm Blk
4
(FOR HB LEG)
1 pc
H Side Rail Right I Center Slat J Side Rail Leg
2 pcs 1 pc 2 pcs
ALLEN KEY
m5x65mm Blk
5 (FOR SIDE RAIL)
1 pc
Flat Head Chipboard
6 Screw m4x32mm Rbw 32 pcs
STEP 1.1 : Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using Flat washer (3)and securing with ALLEN KEY ( 4 ) .
STEP 1.2 : Fix the other holes with Csk Screw (6) as shown.
JCBC BOLT( 1 ) with
A
C
LEFT
RIGHT
C
BACK VIEW
D
4x
STEP 1.1 :
4 1
C
3
STEP 1.2 :
6
8x
1 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 2.1 : Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) .
STEP 2.2 : Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly. Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).
4
STEP 2.2 :
x8
1
STEP 2.1 : G
3 J
LOOSEN 5
H
TIGHTEN 5
A
Left Sticker G HJ
GH
Right Sticker
L
ALIGN BEFORE TIGHTEN
R
J
FRONT VIEW J
SIDE VIEW
DO NOT FULLY TIGHTEN SCREW
B
IN THIS STEP BEFORE ALIGN
THE SIDE RAIL AS SHOWN.
H G
STEP 3 : Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY) Repeat step 3 for other set of slats assembly.
I E
STEP 3.4 :
6 H
B STEP 3.5 :
4 2
E
STEP 3.1 :
I F
Push the side rail(G)&(H) meet with wooden slat(E) and fix the CSK Screw(6) by using the Screw Driver.
STEP 3.2 : 6 G
E
STEP 3.3 :
REMARK: Push Slat (E) to the end of side rail and secure with CSK Screw(6) as shown.
F Leveler
2 OF 2
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
