B561-300 Aries Queen Platform Bed
Product Information
The B561-300 ARIES 5/0 Q PANEL BED-HB/FB/RAILS is a high-quality
bed frame that provides stability and durability. The bed frame
comes with a headboard, footboard, bed roll-out slats, bed slats
support, side rails, and center slats. The bed frame is easy to
assemble and comes with all the necessary hardware for
assembly.
Parts List
- A – Headboard
- B – Footboard
- C – Headboard Leg LSF
- D – Headboard Leg RSF
- E – Bed Roll-Out Slats
- F – Bed Slats Support
- G – Side Rail Left
- H – Side Rail Right
- I – Center Slat
Hardware List
- JCBC Bolt (1) – M6 x 30mm (12 pcs)
- JCBC Bolt (1) – M6 x 50mm (4 pcs)
- Flat Washer 1/4ID x 19mmOD Blk (12 pcs)
- ALLEN KEY m4x65mm Blk (1 pc)
- ALLEN KEY m5x65mm Blk (5 pcs)
- Flat Head Chipboard Screw m4x32mm Rbw (32 pcs)
Product Usage Instructions
Step 1: Assemble the Headboard (A) and Headboard Legs (C,
D)
Attach the Headboard Leg (C, D) to the Headboard (A) using Flat
Washer (3) and securing with ALLEN KEY (4). Fix the other holes
with Csk Screw (6) as shown in the diagram. Tighten all screws
periodically with use as screws will become loose. Check the
tightness of all screws every 6-8 weeks.
Step 2: Attach Side Rails (G, H) and Side Rail Leg (J) to the
Headboard and Footboard
Attach Side Rail (G) and (H) to the Side Rail Leg (J) using JCBC
Bolt (1) with Flat Washer (3) and securing with ALLEN KEY (4) by
outside side rail (G) and (H). Loosen JCBB Bolt at Headboard and
Footboard Leg using Allen Key (5). Hook SET-UPSIDE RAIL TO HEAD
BOARD (A) closely and push down to fit and tighten them
accordingly. Repeat step 2.2 with the other end of the rail to hook
onto FOOTBOARD (B).
Step 3: Install Bed Slat Support (F), Bed Roll-Out Slats (E),
and Center Slats (I)
Fix the Bed Slat Support (F), to Bed Slat (E), and Center slats
(I) tighten with JCBC Bolt (2) as shown. Install the bed slat (E)
to side rail (G) and (H) and tighten with Csk Screw (6) as per
diagram shown. Push the side rail (G) and (H) meet with wooden slat
(E) and fix the CSK Screw (6) by using the Screw Driver. Level the
bed frame as required. The setup must be done at the decided
location for the bed to obtain perfect stability. Repeat step 3 for
the other set of slats assembly. Tighten all screws periodically
with use as screws will become loose. Check the tightness of all
screws every 6-8 weeks.
ASSEMBLY INSTRUCTIONS
B561-300 ARIES 5/0 Q PANEL BED-HB/FB/RAILS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the parts list and/or hardware list shown.
PARTS LIST
HARDWARE LIST
No
ITEM
Qty
No ITEM
Qty
A Headboard B Footboard C Headboard Leg LSF D Headboard Leg RSF E Bed Roll-Out Slats F Bed Slats Support G Side Rail Left
1 pc 1 pc 1 pc 1 pc 2 sets 4 pcs 2 pcs
1 JCBC M6 x 30mm 12 pcs
2 JCBC M6 x 50mm 4 pcs
Flat Washer 1/4″ID x
3
19mmOD Blk
12 pcs
ALLEN KEY
m4x65mm Blk
4
(FOR HB LEG)
1 pc
H Side Rail Right I Center Slat J Side Rail Leg
2 pcs 1 pc 2 pcs
ALLEN KEY
m5x65mm Blk
5 (FOR SIDE RAIL)
1 pc
Flat Head Chipboard
6 Screw m4x32mm Rbw 32 pcs
STEP 1.1 : Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using Flat washer (3)and securing with ALLEN KEY ( 4 ) .
STEP 1.2 : Fix the other holes with Csk Screw (6) as shown.
JCBC BOLT( 1 ) with
A
C
4
LEFT
RIGHT
C
D
BACK VIEW
1
C
3
4x
6
8x
STEP 1.1 :
STEP 1.2 :
1 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 2.1 : Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) .
STEP 2.2 : Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly. Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).
4
STEP 2.2 :
x8
1
STEP 2.1 : G
3 J
LOOSEN 5
H
TIGHTEN 5
A
Left Sticker G HJ
Right Sticker
L
ALIGN BEFORE TIGHTEN
R
J
GH
FRONT VIEW J
SIDE VIEW
DO NOT FULLY TIGHTEN SCREW IN THIS STEP BEFORE ALIGN THE SIDE RAIL AS SHOWN.
H
B
G
STEP 3 : Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY) Repeat step 3 for other set of slats assembly.
I E
STEP 3.4 :
6 H
B STEP 3.5 :
4 2
E
STEP 3.1 :
I F
Push the side rail(G)&(H) meet with wooden slat(E) and fix the CSK Screw(6) by using the Screw Driver.
STEP 3.2 : 6 G
E
REMARK: Push Slat (E) to the end of side rail and secure with CSK Screw(6) as shown.
STEP 3.3 : F
Leveler
2 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
