315527 Gemini King Platform Bed
Product Information:
- Product Name: B1563-100 GEMINI 6/6 EK PANEL
BED-HB/FB/RAILS - Product Type: Panel Bed with Headboard, Footboard, and
Rails - Parts Included: Headboard, Footboard, Headboard Legs, Footboard
Legs, Bed Roll-Out Slats, Bed Slats Support, Side Rail Left, Side
Rail Right, Center Slat, Flat Washer, JCBC Bolt, Allen Key, Flat
Head Chipboard Screw, Csk Screw - Assembly Required: Yes
Product Usage Instructions:
- Assembly of Headboard:
- Attach Headboard Leg (C, D) to Headboard (A) using Flat washer
(3) and securing with ALLEN KEY (4). - Fix the other holes with Csk Screw (6) as shown.
- Attach Headboard Leg (C, D) to Headboard (A) using Flat washer
- Assembly of Side Rail:
- Attach Side Rail (G) & (H) to the Side Rail Leg (J) using
JCBC BOLT(1) with Flat washer (3) and securing with ALLEN KEY (4)
by outside side rail (G) & (H). - Loosen JCBB Bolt at Headboard & Footboard Leg using Allen
Key (5) (Do not tighten them before Hook SET-UP SIDE RAIL TO HEAD
BOARD (A) closely and push down to fit and tighten them
accordingly. Repeat step 2.2 with other end of rail to hook onto
FOOTBOARD (B).
- Attach Side Rail (G) & (H) to the Side Rail Leg (J) using
- Assembly of Bed Slat:
- Fix the Bed Slat Support (F), to Bed Slat (E) and Center slats
(I) tighten with JCBC Bolt (2). - Install the bed slat (E) to side rail (G) & (H) and tighten
with Csk Screw (6) as per diagram shown. (NOTE: THE SETUP MUST DONE
AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT
STABILITY) - Repeat step 3 for other set of slats assembly.
- Fix the Bed Slat Support (F), to Bed Slat (E) and Center slats
Note: Must tighten screws periodically with
use, screws will become loose. Check tightness of all screws every
6-8 weeks.
ASSEMBLY INSTRUCTIONS
B1563-100 GEMINI 6/6 EK PANEL BED-HB/FB/RAILS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts, which may have come loose inside the carton during shipment. Identify and count all items and compare with the parts list and/or hardware list shown.
PARTS LIST
HARDWARE LIST
No
ITEM
Qty
No ITEM
Qty
A Headboard B Footboard C Headboard Leg LSF D Headboard Leg RSF E Bed Roll-Out Slats F Bed Slats Support G Side Rail Left
1 pc 1 pc 1 pc 1 pc 2 sets 8 pcs 2 pcs
1 JCBC M6 x 30mm 12 pcs
2 JCBC M6 x 50mm 8 pcs
Flat Washer 1/4″ID x
3
19mmOD Blk
12 pcs
ALLEN KEY
m4x65mm Blk
4
(FOR HB LEG)
1 pc
H Side Rail Right I Center Slat J Side Rail Leg
2 pcs 2 pcs 2 pcs
ALLEN KEY
m5x65mm Blk
5 (FOR SIDE RAIL)
1 pc
Flat Head Chipboard
6 Screw m4x32mm Rbw 32 pcs
STEP 1.1 : Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using Flat washer (3)and securing with ALLEN KEY ( 4 ) .
STEP 1.2 : Fix the other holes with Csk Screw (6) as shown.
JCBC BOLT( 1 ) with
A
C
LEFT
RIGHT D
BACK VIEW
C
4x
STEP 1.1 :
4 1
C
3
STEP 1.2 :
6
8x
1 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 2.1 : Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with
Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) . STEP 2.2 : Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before
Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly. Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).
4
STEP 2.2 :
x8
1
STEP 2.1 : G
3 J
LOOSEN 5
H
TIGHTEN 5
A
Left Sticker H JG
GH
Right Sticker
L
ALIGN BEFORE TIGHTEN
R
J
FRONT VIEW J
SIDE VIEW
DO NOT FULLY TIGHTEN SCREW
B
IN THIS STEP BEFORE ALIGN
THE SIDE RAIL AS SHOWN.
H G
STEP 3 : Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY) Repeat step 3 for other set of slats assembly.
I E
E
STEP 3.4 : I
F B
4 2
STEP 3.1 :
Push the side rail(G)&(H) meet with wooden slat(E) and fix the CSK Screw(6) by using the Screw Driver.
STEP 3.2 : 6 G
STEP 3.5 :
6
E
H
STEP 3.3 : F
REMARK: Push Slat (E) to the end of side rail and secure with CSK Screw(6) as shown.
Leveler
2 OF 2
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
