315524 Leo Queen Platform Bed
Product Information: B1562-300 LEO 5/0 Q PANEL
BED-HB/FB/RAILS
The B1562-300 LEO 5/0 Q PANEL BED-HB/FB/RAILS is a high-quality
bed that requires assembly. It comes with a headboard, a footboard,
rails, bed roll-out slats, bed slats support, side rail left and
right, center slat, headboard leg LSF, and headboard leg RSF. The
hardware required for assembly includes JCBC bolts and screws, flat
washers, Allen keys, and Csk screws.
Product Usage Instructions
Before starting the assembly process, check all packing
materials carefully for small parts that may have come loose inside
the carton during shipment. Identify and count all items and
compare them with the parts list and/or hardware list shown.
Step 1: Attach the Headboard Leg to Headboard
- Attach Head Board Leg (C,D) to Head Board (A) as shown using
Flat washer (3) and securing with ALLEN KEY (4). - Fix the other holes with Csk Screw (6) as shown.
- MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME
LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
Step 2: Attach the Side Rail to Side Rail Leg
- Attach Side Rail (G) & (H) to the Side Rail Leg (J) as
shown using JCBC BOLT(1) with Flat washer (3) and securing with
ALLEN KEY (4) by outside side rail (G) & (H). - Loosen JCBB Bolt at Headboard & Footboard Leg using Allen
Key (5) (Do not tighten them before Hook SET-UPSIDE RAIL TO HEAD
BOARD (A) closely and push down to fit and tighten them
accordingly. Repeat step 2.2 with the other end of rail to hook
onto FOOTBOARD (B). - DO NOT FULLY TIGHTEN SCREW IN THIS STEP BEFORE ALIGN THE SIDE
RAIL AS SHOWN.
Step 3: Fix the Bed Slat Support and Bed Slat
- Fix the Bed Slat Support (F), to Bed Slat (E) and Center slats
(I) tighten with JCBC Bolt (2) as shown. - Install the bed slat (E) to side rail (G) & (H) and tighten
with Csk Screw (6) as per diagram shown. (NOTE: THE SETUP MUST DONE
AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY)
Repeat step 3 for another set of slats assembly. - MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME
LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
ASSEMBLY INSTRUCTIONS
B1562-300 LEO 5/0 Q PANEL BED-HB/FB/RAILS
Thank you for purchasing this quality product. Be sure to check all packing materials carefully for small parts,
which may have come loose inside the carton during shipment. Identify and count all items and compare with
the parts list and/or hardware list shown.
PARTS LIST
HARDWARE LIST
No
ITEM
Qty
No ITEM
Qty
A Headboard B Footboard C Headboard Leg LSF D Headboard Leg RSF E Bed Roll-Out Slats F Bed Slats Support G Side Rail Left
1 pc 1 pc 1 pc 1 pc 2 sets 4 pcs 2 pcs
1 JCBC M6 x 30mm 12 pcs
2 JCBC M6 x 50mm 4 pcs
Flat Washer 1/4″ID x
3
19mmOD Blk
12 pcs
ALLEN KEY
m4x65mm Blk
4
(FOR HB LEG)
1 pc
H Side Rail Right I Center Slat J Side Rail Leg
2 pcs 1 pc 2 pcs
ALLEN KEY
m5x65mm Blk
5 (FOR SIDE RAIL)
1 pc
Flat Head Chipboard
6 Screw m4x32mm Rbw 32 pcs
STEP 1.1 : Attach Head Board Leg ( C,D ) to Head Board ( A ) as shown using Flat washer (3)and securing with ALLEN KEY ( 4 ) .
STEP 1.2 : Fix the other holes with Csk Screw (6) as shown.
JCBC BOLT( 1 ) with
A
C
LEFT
RIGHT
C
D
BACK VIEW
4x
STEP 1.1 :
4 1
3
C
STEP 1.2 :
6
8x
1 OF 2 NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
STEP 2.1 : Attach Side Rail ( G ) & ( H ) to the Side Rail Leg ( J ) as shown using JCBC BOLT( 1 )with Flat washer (3)and securing with ALLEN KEY ( 4 ) by outside side rail (G) & (H) .
STEP 2.2 : Loosen JCBB Bolt at Headboard & Footboard Leg using Allen Key (5) (Do not tighten them before Hook SET-UPSIDE RAIL TO HEAD BOARD (A) closely and push down to fit and tighten them accordingly. Repeat step 2.2 with other end of rail to hook onto FOOTBOARD (B).
4
STEP 2.2 :
x8
1
STEP 2.1 : G
GH
3 J
LOOSEN
5
5
H
TIGHTEN A
Left Sticker JG
H
L
Right Sticker
ALIGN BEFORE TIGHTEN
R
J
H
FRONT VIEW J
SIDE VIEW
DO NOT FULLY TIGHTEN SCREW IN THIS STEP BEFORE ALIGN THE SIDE RAIL AS SHOWN.
B
G
STEP 3 : Fix the Bed Slat Support (F ), to Bed Slat (E) and Center slats (I) tighten with JCBC Bolt (2) as shown . Install the bed slat ( E ) to side rail ( G ) & ( H ) and tighten with Csk Screw ( 6 ) as per diagram shown. (NOTE: THE SETUP MUST DONE AT THE DECIDED LOCATION FOR THE BED TO OBTAIN PERFECT STABILITY) Repeat step 3 for other set of slats assembly.
4
2
Push the side rail(G)&(H)
meet with wooden slat(E)
E
STEP 3.1 :
and fix the CSK Screw(6)
I
by using the Screw Driver.
E
STEP 3.4 :
I
F B
STEP 3.2 : 6
G
STEP 3.5 : E
6 H
REMARK: Push Slat (E) to the end of side rail and secure with CSK Screw(6) as shown.
STEP 3.3 : F
Leveler
2 OF 2
NOTE : MUST TIGHTEN SCREWS PERIODCALLY WITH USE SCREW WILL BECOME LOOSE CHECK TIGHTNESS OF ALL SCREW EVERY 6-8 WEEKS.
