UTV-DRS UTV Dash Rocker Switch
Product Information
The UTV Dash Mounted Rocker Switch, model number UTV-DRS, is a
control switch designed for use in UTVs. It is manufactured by KFI
Products, a company based in Spring Valley, MN, USA. The switch
features a white rocker plunger and is designed for easy
installation.
Controls and Features
- Wiring Layout
- Switch Wiring Diagram
Installation
Before installing the UTV Dash Mounted Rocker Switch, ensure
that you have the correct orientation for the switch with the tab
facing towards you. Follow the steps below:
- Insert the blue diodes (A) first and small spring (B) second
into the designated hole on each side as shown in Figure 1. - Insert the two large springs (C) into the designated holes on
each side as shown in Figure 1. - Set the clips (D) face up into the designated location shown in
Figure 1. - Set the white rocker plunger onto the post in the top portion
of the switch as shown in Figure 2. - Take the top portion of the switch and set it on the bottom
portion as shown in Figure 3. - Note: The “In” position is lined up with the tab on one side of
the switch to ensure correct attachment. Refer to Figure 3. - There is a clip on each side of the rocker switch. Push the top
portion of the switch down and snap the clips into place. Refer to
Figure 3.
Product Usage Instructions
Once the UTV Dash Mounted Rocker Switch is properly installed,
follow the instructions below for usage:
- Ensure that the switch is in the desired position before
operating your UTV. - To activate a specific function or control, simply press the
corresponding side of the rocker switch up or down. - Make sure to familiarize yourself with the functions and
positions of the switch for proper operation.
Warranty
KFI Products offers a 1-year limited warranty for the UTV Dash
Mounted Rocker Switch. The warranty qualifications and exclusions
are outlined in the user manual. For warranty claims or technical
service, please contact KFI Products Customer Service at
1-877-346-2050 or visit their website at www.kfiproducts.com.
UTV DASH MOUNTED ROCKER SWITCH
MODEL NUMBER
UTV-DRS
SAVE THESE INSTRUCTIONS Important Safety Instructions are included in this manual.
721 Sata Drive
Spring Valley, MN 55975
USA /1-877-346-2050 w w w.k fi p roducts.com
UTV-DRS
UTV Dash Rocker Switch
CONTROlS AND FEATURES
(1) Rocker Switch Used to power the rope in or out of your winch drum. This switch is a Double Pole/Double Throw (two contact points per IN or OUT)
WIRING lAYOUT
Switch Wiring Diagram
Tab
Terminal #2, #5, #8 and #10 Power to Switch (+) (Connect to RED wire on contactor) – #8 and #10 are for ignition power to LED’s
Terminal #1 and #4 Signal for Winch -IN- (Connect to small GREEN wire on contactor) Terminal #3 and #6 Signal for Winch -OUT- (Connect to small BLACK wire on contactor) Terminal #7 and #9 Ground (-) for LED (Connect to Frame ground or Battery (-) NEGATIVE post on the contactor)
UTV-DRS
INSTAllATION
Note: Before installing make sure you have the correct orientation for the switch with the tab facing towards you.
1. Insert the blue diodes (A) first and small spring (B) second into the designated hole on each side shown in Figure 1.
2. Insert the two large springs (C) into the designated holes on each side shown in Figure 1.
3. Set the clips (D) Face up into the designated location shown in Figure 1.
4. Set the white rocker plunger onto the post in the top portion of the switch shown in Figure 2.
5. Take the top portion of the switch and set it on the bottom portion. Shown in Figure 3.
6. Note: The “In” position is lined up with the (Tab) on the one side of the switch so you know how to attach it back together correctly. Shown in Figure 3.
7. There is a clip on each side of the rocker switch. Push the top portion of the switch down and snap the clips into place. Shown in Figure 3.
C
B
A D
Face Up
C
A B
Tab
Figure 1
Top
Plunger
Bottom
Clip Figure 2
UTV-DRS
Note Tab
Figure 3
WARRANTY
WARRANTY
KFI Products 1 YEAR LIMITED WARRANTY
Warranty Qualifications
Kappers Fabricating, Inc. (KFI) will warranty with a copy of your sales receipt from one of KFI’s retail locations as proof of purchase.
Repair/Replacement Warranty
Kappers Fabricating, Inc. (KFI) warrants to the original purchaser that the mechanical and electrical components will be free from defects in materials and workmanship for a period of one (1) year from the original date of purchase. We will repair or replace, at our discretion, parts found to be defective due to materials or workmanship. This warranty applies only to products which have been properly assembled, adjusted, and operated in accordance with the instructions contained within the product manual. This warranty does not apply to any product of Kappers Fabricating, Inc. that has been subject to alteration, misuse, abuse, improper assembly or installation, or shipping damage.
Do Not Return The Unit To The Place Of Purchase
In the event you have a claim under this warranty, contact KFI’s Technical Service and KFI will troubleshoot any issue via phone or e-mail. If the problem is not corrected by this method, KFI will, at its option, authorize evaluation, repair or replacement of the defective part or component at a KFI Service Center. KFI will provide you with a case number for warranty service. Please keep it for future reference. Repairs or replacements without prior authorization, or at an unauthorized repair facility, will not be covered by this warranty.
Warranty Exclusions
This warranty does not cover the following repairs and equipment:
Normal Wear
This product needs periodic parts and service to perform well. This warranty does not cover repair when normal use has exhausted the life of a part or the equipment as a whole.
Other Exclusions
This warranty excludes: Cosmetic defects such as paint, decals, etc. Failures due to acts of God and other force majeure events beyond the manufacturer’s control. Problems cause by parts that are not original KFI Products parts. Failures due to Water intrusion.
limits of Implied Warranty and Consequential Damage
THIS WARRANTY DOES NOT APPLY TO ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES AND ANY IMPLIED WARRANTIES ARE LIMITED TO THE SAME TIME PERIODS STATED HEREIN FOR ALL EXPRESSED WARRANTIES.
THE WARRANTY SET FORTH ABOVE IS THE ONLY WARRANTY. THERE ARE NO OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Some states do not allow the exclusion of implied warranties or the exclusion or limitation of liability for incidental or consequential damages, or limitations on how long an implied warranty lasts, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights. You may also have other rights that vary from state to state.
Contact Information
Address
KFI Products Customer Service 721 Sata Drive Spring Valley, MN 55975 www.kfiproducts.com
Technical Service
Mon Thu, 8:00 AM 5:00 PM (CST) Fri, 8:00 AM – 1:00 PM (CST) Toll Free: 1-877-346-2050 [email protected]
UTV-DRS
1-877-346-2050
KFI Products P.O. Box 32 721 Sata Drive Spring Valley, MN 55975 USA www.kfiproducts.com Made In China ©2016 Kappers Fabricating, Inc.
UTV-DRS
1) Install Switch to desired location on your dash
1. Most UTV’s and SxS’s have predefined switch locations that are pre-scribed or marked for mounting and require finish cut with a knife.
2. Use the cut-out dimensions shown below to cut-out the switch location If your dash doesn’t have the pre-scribed areas.
3. Pull the plug end of the wiring harness through the hole and connect it to the rocker switch outside the hole before inserting the switch.
Note: Insert the switch carefully, if the hole is to small trim some of the plastic. This switch comes in two pieces for ease of installation, is not designed to come back apart after installing.
UTV-DRS
ATV winches, mounts and accessories for KFI Products - KFI ATV Winch, Mounts and Accessories
