Emos Zm5142 Led Panel Instruction Manual

Emos Zm5142 Led Panel Instruction Manual

EMOS-logoEMOS ZM5142 LED Panel

EMOS-ZM5142-LED-Panel

Order CodeInput VoltagePower ConsumptionLight ColorLife SpanLuminous FluxDimensions
ZM5121 

220–240 V AC, 50/60 Hz

 

6 W

Warm white 

30 000 h

 

450 lm

 

Ø 120 × 40 mm

ZM5122Neutral white
ZM5131 

220–240 V AC, 50/60 Hz

 

12.5 W

Warm white 

30 000 h

 

1 000 lm

 

Ø 170 × 40 mm

ZM5132Neutral white
ZM5141 

220–240 V AC, 50/60 Hz

 

18 W

Warm white 

30 000 h

 

1 500 lm

 

Ø 224 × 40 mm

ZM5142Neutral white
ZM5151 

220–240 V AC, 50/60 Hz

 

24 W

Warm white 

30 000 h

 

2 000 lm

 

Ø 300 × 40 mm

ZM5152Neutral white

EMOS-ZM5142-LED-Panel-1

Order CodeInput VoltagePower ConsumptionLight ColorLife SpanLuminous FluxDimensions
ZM6121 

220–240 V AC, 50/60 Hz

 

6 W

Warm white 

30 000 h

 

450 lm

 

120 × 120 × 40 mm

ZM6122Neutral white
ZM6131 

220–240 V AC, 50/60 Hz

 

12.5 W

Warm white 

30 000 h

 

1 000 lm

 

170 × 170 × 40 mm

ZM6132Neutral white
ZM6141 

220–240 V AC, 50/60 Hz

 

18 W

Warm white 

30 000 h

 

1 500 lm

 

225 × 225 × 40 mm

ZM6142Neutral white
ZM6151 

220–240 V AC, 50/60 Hz

 

24 W

Warm white 

30 000 h

 

2 000 lm

 

300 × 300 × 40 mm

ZM6152Neutral white

GB | LED panel, surface-mounted

LED luminaire is designed for indoor use to be mounted on a solid base.Ingress Protection: IP20 – for indoor use

Mounting

To ensure protection against injury by electric current, it is necessary to remove the connected testing conductors at the power supply input during installation and replace them with conductors with double or reinforced insulation. Mount the lamp firmly onto a solid basis, for example a wall, a ceiling and like that.Connect the power cord to the mains 230 V. Connecting conductor must not be connected to the mains at time of installation. This operation can be carried out only by an authorized person.

WARNING
  • Luminaire is suitable entirely for fixed mounting.
  • The luminaire can be connected only to the electric distribution network, whose installation and protection complies with the applicable standards.
  • Before any manipulation or servicing of the luminaire disconnect the luminaire from AC power. This operation can be carried out only by an authorized person.
  • In case of any damage to any part of the luminaire, don’t use it.
  • LED chips inside the luminaire are not replaceable.
  • Don’t change inner wiring of the luminaire.
  • In case of broken cover don’t use the luminaire and replace broken cover with new one immediately.

EMOS spol. s r.o. declares that the LED panel, surface-mounted is in compliance with the essential requirements and other relevant provisions of Directive. The device can be freely operated in the EU. The Declaration of Conformity can be found at http://www.emos.eu/download.

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals