SIGNAL R 3.0 A Circular Connectors with Solder Termination
Product Information:
Product Name: Conductors
Product Code: Dok.-Nr.: L99092886 vs00
Panel Cut-out: M3 (4x)
Gasket: Art.Nr. 50201203
Safety Certification: ISO 1580 – M3 0,5 Nm
Product Usage Instructions:
- Ensure that the product is not under load before performing any
connection or disconnection. - Locate the panel cut-out on the desired installation
surface. - Using four M3 screws, secure the conductors in place.
- Tighten the screws to a torque of 0.5 Nm using an appropriate
tool. - Install the gasket (Art.Nr. 50201203) to provide a secure
seal.
Note: If the content of this bag will be split
on two or more units, a copy of this instruction sheet must be
placed in every packing unit.
Safety Information:
- CAUTION: Do not disconnect under load.
- ATTENTION: Ne pas utiliser pour couper le
courant.
Dok.-Nr.: L99092886 vs00
23
U.I.LAPP GmbH Schulze-Delitzsch-Straße 25, D-70565 Stuttgart www.lappgroup.com
Montageanleitung / Assembly instruction EPIC® SIGNAL R 3.0 A
1
Adern
conductors
2
Löten / solder
3
Montageausschnitt
Panel cut-out
M3 (4x)
+0,2
O 23 0 23
4
ISO 1580 – M3 0,5 Nm
Flachdichtung – Art.Nr. 50201203 Gasket – art. no. 50201203
Gültig für / valid for: 00008747 EPIC® SIGNAL R 3.0 A 21 MALE CONTACTS 00008825 EPIC® SIGNAL R 3.0 A 26 MALE CONTACTS 00008867 EPIC® SIGNAL R 3.0 A 21 FEMALE CONTACTS 00008746 EPIC® SIGNAL R 3.0 A 26 FEMALE CONTACTS
Hinweis / Note: Sollte der Inhalt dieser Verpackung auf neue Verpackungen verteilt werden, so muss jeder neuen Verpackung eine Kopie dieser Bedienungsanleitung beigelegt werden. If the content of this bag will be split on two or more units, a copy of this instruction sheet must be placed in every packing unit.
Sicherheitsinformationen / Safety informations:
! ! ACHTUNG: NICHT UNTER LAST STECKEN ODER TRENNEN CAUTION: DO NOT DISCONNECT UNDER LOAD ATTENTION: NE PAS UTILISER POUR COUPER LE COURANT
Lapp Group
