PoE4v2 Power Over Ethernet Injector Hub
Product Information
The PoE4v2 Power over Ethernet (PoE) Injector Hub from Iris
Innovations is a rugged and compact device designed to provide
power and network connectivity to IP CCTV cameras and network
equipment. It features a stylish extruded aluminum chassis with
industry-standard connectors for reliable operation. The injector
is a plug-and-play device that operates over a wide DC input range
of 9 ~ 30VDC. It is compliant with IEEE802.3af / 3at standards,
allowing it to deliver up to 30W of power per port with a maximum
power budget of 60W. The PoE4v2 comes with 4 powered ethernet ports
and a passive uplink port.
Product Usage Instructions
- Installation:
- Ensure the device is installed in a clean, dry environment away
from excess heat sources, moisture, and excessive vibration. - Before fixing the PoE4v2 into position, make sure there is
sufficient space around the unit for ventilation and cable strain
relief. - The PoE4v2 can be screwed into place using a surface mounting
kit (optional) or fixed using strong Velcro pads. Do not drill
through the unit. - Connect the power connector supplied, ensuring the correct
polarity is observed. The power connectors are push-pin type. Use a
small flat-bladed screwdriver to push in the tab on top of each
terminal, insert each power cable ensuring polarity is correct,
fully into the terminal, and then release the tab to grip the wire
in place.
- Connect your network cables to the PoE4v2 as required.
- Apply DC power within the wide input range of 9 ~ 30VDC.
- The PoE4v2 is a plug-and-play device, so no configuration or
setup is required. - The device has 4 powered ethernet ports and a passive uplink
port. Each port can deliver up to 30W of power, with a maximum
power budget of 60W. If 4 devices are connected, the maximum power
for each port will be 15W. - The PoE4v2 is compliant with IEEE802.3af / 3at standards.
For full instructions, regulatory and safety information, and
product specifications, please visit the www.boat-cameras.com website.
PoE4v2
Wide DC Input Voltage Range PoE Injector
PoE4v2
Dimension Drawing
QUICK START GUIDE
Thank you for choosing the PoE4v2 Power over Ethernet (PoE) Injector Hub from Iris Innovations.
This document is designed to provide a brief overview of the product, it’s features and installation instructions. Full instructions, regulatory and safety information can be downloaded from our website: www.boat-cameras.com
Iris offer a range of network power injectors to complement our extensive portfolio of rugged IP CCTV cameras and network equipment. The PoE4v2 has been designed
Rugged & Compact
With its stylish and compact form factor, the PoE4v2 chassis is manufactured from an extruded aluminium design with high quality and rugged industry standard connectors, designed for reliable operation throughout its life.
Plug & Play
The PoE4v2 Injector is a Plug and Play device with no configuration or setup required. Simply connect your network cables as required, apply DC power and you’re good to go!
The PoE4v2 operates over a wide DC input range of 9 ~ 30VDC.
Operation
The PoE4v2 Power over Ethernet Injector Hub features 4 powered ethernet ports and a passive `uplink’ port. Each port is capable of delivering power up to 30W per port with a maximum power budget of 60W. Therefore, if 4 devices are connected, the maximum power for each port will be 15W.
The PoE4v2 is IEEE802.3af / 3at compliant.
What’s in the Box?
The following parts are included with your PoE4v2
1 x PoE4v2 Power Injector 1 x 2 Core Power Input Cable 1 x Quick Start Guide
Installation
Ensure the device is installed in a clean, dry environment away from excess heat sources, moisture and excessive vibration.
Before you fix the PoE4v2 into position, take time to ascertain there is sufficient space around the unit to allow ventilation and to take into account cable strain relief.
The PoE4v2 can either be screwed into place using a surface mounting kit (optional) or, due to its very light weight, fixed using strong Velcro pads. Do not drill through the unit.
Connect the power connector supplied ensuring the correct polarity is observed.The power connectors are push-pin type. Use a small flat bladed screw driver to push in the tab on top of each terminal and hold, insert each power cable ensuring polarity is correct, fully into the terminal and then release the tab to grip the wire in place.
ESSENTIAL SAFETY NOTICES:
Product Disposal and Recycling: Dispose of this product in accordance with the WEEE Directive. The Waste Electrical and Electronic Equipment (WEEE) Directive requires the recycling of waste electronic and electrical equipment. Iris Innovations supports the WEEE policy and politely request you observe correct disposal methods. For further information on how to correctly dispose of this product please contact Iris Innovations. Please recycle unwanted packaging and documentation. The cardboard carton, all paper manuals and documents and the protective plastic bag in which the camera is shipped are widely recyclable. Please check with your local recycling plant for confirmation.
EMC Guidelines: This product is designed to be used as a power supply for a visual aid or part of a visual aid system and is not part of the vessels navigational system – even if used in conjunction with other on board equipment or third party systems – and is compliant with the EMC directive 2014/30/EC. The original Declaration of Conformity (DoC) is available from our website The camera should not be installed on the ships helm or in close proximity to radio receiver equipment. We recommend the camera is installed no closer than 1m from any equipment transmitting or cables carrying radio signals – particularly VHF radios and associated equipment. The device needs to be powered from a clean DC Power Supply fitted with an adequately rated fuse to profile the necessary electrical protection in accordance with its operating power ratings.
Water Ingress: Disclaimer: This product has not been tested to environmental ingress protection levels (IP30 rating) and is therefore not for external use. It must be installed in a clean, dry environment in accordance with the instructions provided in this document. Any evidence of water or moisture damage will invalidate the product warranty.
Full product safety, warning and compliance information, including Declaration of conformity is available from www.boat-cameras.com
V1.00 010223
SELECTED SPECIFICATIONS:
Full specifications are listed in the complete product guide which can be downloaded from our website.
LAN
PoE Ports PoE Standards
5 x RJ45 Ports, 10/100/1000Mbps, Compliant with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX
crossover
Ports 1~4
802.3af and 802.3at
PoE Max Power per Port
30W
Total PoE Power Budget
Maximum Ethernet Cable Length
60W 100m
Bandwidth (non blocking)
10 Gbps
Packet Buffer
128 KB
MAC address Table Size
2K Entries
Jumbo frame Support
9216 bytes
Connector
2 pin industrial push tab grip style
Input Voltage Range
9~30 VDC
Input Voltage Range for PoE
9~30VDC
Power Consumption Ethernet Ports Status LED’s
Idle: 0.8W / Max 2.2W / PoE Max 106W
5 x RJ45 Ports, 10/100/1000 Mbps
1 x Power LED, 10 x Ethernet Status LED’s (2 per port)
Grounding
1 x Grounding Screw
Case Material
Aluminium
Dimensions (W x H x D)
115 x 32 x 95 mm
Weight
354g
Operating Temperature
-40°C to +75°C
Operating Hummidity
10% to 90% Non Condensing
Ingress Protection
IP30
Approvals
CE, REACH, RoHS, WEEE, UKCA, FCC, IC, CB, RCM, E-Mark
Standards
EN IEC 62368-1:2020+A11:2020 EN60945:2002 Section 9&10
Manufactured & Assembled in the United Kingdom
Iris Innovations Limited
Unit 240 Ordnance Business Park, Aerodrome Road Gosport. Hampshire PO13 0FG. United Kingdom
Tel: +44(0)2392 556509 / email: [email protected] www.boat-cameras.com
V1.00 010223
cameras.com
Boat Cameras - Iris Innovations
