ULINE Service Cart
TOOLS NEEDED
PARTS
ASSEMBLY
- Insert caster sockets into each corner of shelf and tap in with rubber mallet until secure. (See Figure 1)
- Tap casters into caster sockets using rubber mallet. (See Figure 2)
- Tap supports onto bottom shelf using rubber mallet. (See Figure 3)
- Tap middle shelf onto supports using rubber mallet. (See Figure 4)
CAUTION: Mallet should not be used directly on corners. Carefully tap on either side adjacent to each corner.
- Tap supports onto middle shelf using rubber mallet. (See Figure 5)
- Tap handles onto top shelf using rubber mallet.
Insert screws into underside of top shelf and secure handles using Phillips screwdriver. (See Figure 6)
- Tap top shelf onto supports using rubber mallet. (See Figure 7)
CAUTION: Mallet should not be used directly on corners. Carefully tap on either side adjacent to each corner.
- Ensure that all components are fully seated with rubber mallet.
