821 Anti-Vandal Pull Trim
Product Information
This product is an Anti-Vandal Pull Trim designed for use with
8800 & 8900 Series Exit Devices. It is equipped with latch
protection and comes in various functions, including 824 04
Function With Latch Protection, 827 10 Function With Latch
Protection, 826 04 Function Without Latch Protection, and 821 10
Function Without Latch Protection. The trim is supplied with
instructions and template A7628, which should be used for proper
installation. It is important to note that this product contains
lead, which is known to the state of California to cause cancer and
birth defects or other reproductive harm.
Product Usage Instructions
- Before installing the trim, prepare the door according to the
instructions and template provided with the exit device and
template A7628. - If using a cylinder other than SARGENT, make sure to use the
mounting plates supplied with the cylinder. - Mount the trim using four #10-24 through-bolts, which are
supplied with the product. Securely attach the trim to the
door. - Mount the cylinder by using two screws through the chassis,
which are also supplied with the product. Ensure the cylinder is
properly aligned and securely attached.
Please refer to the provided instructions and diagrams for more
detailed installation steps. For any additional information or
concerns about potential health risks associated with this product,
visit www.P65warnings.ca.gov.
Installation Instructions
Anti-Vandal Pull Trim
For use with 8800 & 8900 Series Exit Devices
FOR PROPER TRIM INSTALLATION PREP DOOR WITH INSTRUCTIONS AND TEMPLATE(S) SUPPLIED WITH EXIT DEVICE AND TEMPLATE A7628 (INCLUDED WITH AVT TRIM).
Latch Protection
Latch Protection
824 04 Function With Latch Protection
10 FUNCTION
Through-bolt stud
827 10 Function With Latch Protection
826 04 Function Without Latch Protection
04 FUNCTION
821 10 Function Without Latch Protection
WARNING
This product can expose you to lead which is known to the state of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65warnings.ca.gov.
Mount trim with four #10-24 through-bolts (supplied)
*Mount cylinder with 2 screws through chassis (supplied)
1-800-727-5477 · www.sargentlock.com
Copyright © 2022, SARGENT Manufacturing Company. All rights reserved. Reproduction in whole or in part without the express written permission of SARGENT Manufacturing Company is prohibited.
Rim cylinder
* NOTE: When using cylinders other than SARGENT use mounting plates supplied with cylinder.
A5030C 4/22
