House Of Rohl R51 Ext51kit 1/2 Inch Pressure Balance Rough In Valve Instruction Manual

R51 EXT51KIT 1/2 Inch Pressure Balance Rough In Valve

Product Information

Product Name: R51 EXT51KIT

Product Type: Trim Set Extension Kit

Product Usage Instructions

  1. Turn off the stops and remove the cartridge. To remove your
    trim set, refer to the original installation guide.
  2. Install centering pins and new bottom cavity gasket into the
    extension.
  3. Install the new puck extension and the balancing spool and
    cartridge into place.
  4. Install the cartridge nut housing by hand tightening and apply
    a 1/4 turn with a wrench. Do not overtighten.

Contact Information

For warranty or additional information, please contact:

US Customers: houseofrohl.com/support

Canadian Customers: houseofrohl.ca/support

US Customers Phone: 1-800-777-9762

Canadian Customers Phone: 1-866-473-8442 or 1-800-287-5354

INSTRUCTION MANUAL MANUEL D’INSTRUCTIONS
MANUAL DE INSTRUCCIONES

R51 EXT51KIT

1. Turn off stops and remove the cartridge. To remove your trim set, refer to original installation guide. 1. Turn off stops and remove the cartridge. To remove your trim set, refer to original installation guide. 1. Turn off stops and remove the cartridge. To remove your trim set, refer to original installation guide.

2. Install centering pins and new bottom cavity gasket into the extension. 3. Install the new puck extension and the balancing spool and cartridge into place. 4. Install cartridge nut housing by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.

2. Install centering pins and new bottom cavity gasket into the extension. 3. Install the new puck extension and the balancing spool and cartridge into place. 4. Install cartridge nut housing by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.

2. Install centering pins and new bottom cavity gasket into the extension. 3. Install the new

puck extension and the balancing spool and cartridge into place. 4. Install cartridge nut housing

by hand tightening and apply a 1/4 turn with a wrench. Do not overtighten.

For warranty or additional information, contact:

US Customers houseofrohl.com/support

INS12920 – Rev. 06/22

1-800-777-9762

Canadian Customers houseofrohl.ca/suppor
1-866-473-8442 1-800-287-5354

References

Documents / Resouces

Download manual
Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.


Related Manuals