Hi-focus Hf-sh04-60w 4 Port Poe Switch User Guide

HF-SH04-60W 4 Port POE Switch

Product Features

• Supports Power over Ethernet (PoE) cable devices such as
  wireless AP and IP cameras.
• Supports IEEE802.3af/at standard.
• Transmission distance of 250m, allowing flexible installation
  for wireless AP and surveillance projects.
• Supports upward port auto MDI/MDIX.
• Adopts storage forward switch system.
• Smart Power and minimum consumption to guarantee PD
  requirement.
• Provides power supply circuit protection function and
  protection for back-end devices.
• Automatically provides adaptive device.
• Fanless design for energy saving and environmental
  protection.
• No noise design to reduce environmental impact.
• Compact size design.
• Supports IEEE802.1Q VLAN and 4K VLANs.
• Supports loop circuit detection.
• Supports power saving function when port is disconnected.

Specifications:

• Network Port Transfer Rate: Performance
• Network protocol and standard: N/A (not specified in the
  manual)
• Power pin LEDs indicator: Power
• Operating Temperature: N/A (not specified in the manual)
• Storage Temperature: N/A (not specified in the manual)
• Working Humidity: N/A (not specified in the manual)
• Storage Temperature: N/A (not specified in the manual)
• Dimensions (LxWxH): 125mm x 75mm x 27mm
• Weight: 0.5kg

Product Usage Instructions:

1. Connect the PoE cable device (wireless AP or IP camera) to the
   HF-SH04-60W using an Ethernet cable.
2. Ensure that the device you are connecting supports
   IEEE802.3af/at standard.
3. Place the HF-SH04-60W within a transmission distance of 250m
   for flexible installation.
4. Make sure to use the upward port auto MDI/MDIX feature for
   proper connectivity.
5. Activate the storage forward switch system for efficient data
   transfer.
6. Monitor the power consumption to meet PD requirements.
7. Take advantage of the power supply circuit protection function
   to ensure device safety.
8. If needed, enable the adaptive device functionality to optimize
   performance.
9. Utilize the fanless design to save energy and contribute to
   environmental protection.
10. Note that the noiseless design reduces environmental
    disturbances.
11. Enjoy the compact size design for easy installation and
    space-saving.
12. If VLANs are required, configure IEEE802.1Q VLAN and up to 4K
    VLANs.
13. Enable loop circuit detection for enhanced network
    stability.
14. To save power, activate the power saving function when a port
    is not connected.

HF-SH04-60W
Product Features
Support Power over Ethernet cable device for example wireless AP and IP
camera.
Support IEEE802.3af/at standard . Transmission distance 250m, it can be flexible installation for wireless AP and
surveillance project.
Support upward port auto MDI/MDIX. Adopted storage forward switch system. Smart Power and minimum consumption, guarantee PD requirement. Provided with power supply circuit protection function and protection back-end
device safety
Automatically provide the adaptive device Fanless design realize saving energy and environment protection No noise design can reduce the affect for environment Compact size design Support IEEE802.1 Q VLAN and 4K VLANs Support loop circuit detection Support saving power function when port unconnection

Specifications:

Network Port Transfer Rate
Performance
Network protocol and standard
Power pin LEDs indicator Power
ENVIRONMENTAL CHARACTERISTICS Operating Temperature Storage Temperature Working Humidity Storage Temperature PHYSICAL CHARACTERISTICS Dimenions(LxWxH) Weight

4 10/100Mbps PoE RJ45 port(port 1~port 4) 2 10/100Mbps Non-POE RJ45 port(port 5~port6) 100Mbps full Duplex,10 or 100Mbps Half Duplex Network interface:10BASE-T or 100BASE-TX Ethernet RJ-45 port Bandwidth:1.0Gbps (no block) Network delay(100 to 100Mbps): Maximum 20 s(using 64 byte packet) MAC address capacity:1K Frames filter and transfer rate 10M port maximum 14,800pps 100M port maximum 148,800pps IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet 1/2(+),3/6(-) Power LINK/ACT,PoE Total power:60W(PoE Port:14) (Each country use customized power plug)
0°~45°C32°~113°F -20~90-4°~194°F 10%~90% (Non-condensing) 5%~90% (Non-condensing)
125mm x 75mm x 27mm 0.5kg