HF-SEH04-60W Network Switch
Product Information
The HF-SEH04-60W is a network switch that supports Power over
Ethernet (PoE) devices such as wireless access points and IP
cameras. It supports the IEEE802.3af/at standard and has a
transmission distance of up to 250m, making it flexible for
installation in wireless AP and surveillance projects. The switch
also features upward port auto MDI/MDIX, storage forward switch
system, and smart power and minimum consumption to guarantee PD
requirement. It has a power supply circuit protection function and
protection back-end device safety, and can automatically provide
adaptive device fanless design to save energy and protect the
environment. The switch is compact in size, supports IEEE802.1 Q
VLAN and 4K VLANs, loop circuit detection, and saving power
function when port unconnection.
Product Usage Instructions
To use the HF-SEH04-60W network switch, connect it to your PoE
devices such as wireless access points and IP cameras using
Ethernet cables. The switch supports the IEEE802.3af/at standard,
so make sure your devices are compatible with this standard. The
switch also supports upward port auto MDI/MDIX, so you don’t need
to worry about crossover cables.
The switch is compact in size, so you can place it on a desk or
mount it on a wall or ceiling using the included mounting brackets.
Make sure the switch is placed in a well-ventilated area to prevent
overheating.
The switch features LEDs indicators for power, network activity,
and PoE status. Use these indicators to troubleshoot any issues
with your network or PoE devices.
The switch supports IEEE802.1 Q VLAN and 4K VLANs, so you can
segment your network into different virtual LANs for better
security and management. The switch also supports loop circuit
detection and saving power function when port unconnection to save
energy.
The switch has an operating temperature of -10°C to 50°C and a
storage temperature of -40°C to 70°C. It has a working humidity of
10% to 90% non-condensing and a storage humidity of 5% to 90%
non-condensing. The switch has a dimension of 92mm x 82mm x 22mm
and weighs 0.7kg.
HF-SEH04-60W
Product Features
Support Power over Ethernet cable device for example wireless AP and IP
camera.
Support IEEE802.3af/at standard . Transmission distance 250m, it can be flexible installation for wireless AP and
surveillance project.
Support upward port auto MDI/MDIX. Adopted storage forward switch system. Smart Power and minimum consumption, guarantee PD requirement. Provided with power supply circuit protection function and protection back-end
device safety
Automatically provide the adaptive device Fanless design realize saving energy and environment protection No noise design can reduce the affect for environment Compact size design Support IEEE802.1 Q VLAN and 4K VLANs Support loop circuit detection Support saving power function when port unconnection
Specifications:
Network Port Transfer Rate
Performance
Network protocol and standard
Power pin LEDs indicator Power
ENVIRONMENTAL CHARACTERISTICS Operating Temperature Storage Temperature Working Humidity Storage Temperature PHYSICAL CHARACTERISTICS Dimensions Weight
4 10/100Mbps PoE RJ45 port(port 1~port 4) 1 10/100Mbps Non-POE RJ45 port(port 5) 100Mbps full Duplex,10 or 100Mbps Half Duplex Network interface:10BASE-T or 100BASE-TX Ethernet RJ-45 port Bandwidth:1.0Gbps (no block) Network delay(100 to 100Mbps): Maximum 20 s(using 64 byte packet) MAC address capacity:1K Frames filter and transfer rate 10M port maximum 14,800pps 100M port maximum 148,800pps IEEE 802.3i 10BASE-T IEEE 802.3u 100BASE-TX IEEE 802.3x Flow Control IEEE 802.3af/at Power over Ethernet 1/2(+),3/6(-) Power LINK/ACT,PoE Total power:60W(PoE Port:14) (Each country use customized power plug)
0°~45°C32°~113°F -20~90-4°~194°F 10%~90% (Non-condensing) 5%~90% (Non-condensing)
92mm x 82mm x 22mm 0.7kg
