N7524-716-L 165 Watt Equivalence Integrated LED Smoked Iron Pendant
Product Information: Convertible Lamps for Pendant and Semi
Flush Mount
The Item#N7524-716-L Convertible Lamps are designed for pendant
and semi-flush mount installations. The product comes with a
mounting plate, ground screw, and mounting screws for easy
installation. The fixture wires are black or smooth, white or
ribbed, and bare copper for ground connection. The product is
dimmable with ELV and/or LED compatible wall dimmer switches.
Product Usage Instructions: Pendant Installation
- Shut off power at the fuse box or circuit breaker box and
remove the old fixture including the mounting hardware. - Carefully unpack your new fixture and lay out all the parts on
a clean area. Take care not to misplace any small parts necessary
for installation. - Loosen screws (K) to remove mounting plate (A) from canopy
(L). - Determine desired hanging height and thread rods (F1, F2 and
F3) to all thread (I) on top of fixture body. Carefully pass wires
through each rod during assembly. Secure swivels (G) onto rods
(F1). - Align canopy (L) and metal plate (H) followed by lock washer
(E) and metal washer (D) onto swivels (G) and secure with hex nuts
(C) via wrench (J) (Not included). - Attach mounting plate (A) to junction box (Not included) with
mounting screws (B) (Size: #8-32N*L0.5). The side of mounting plate
(A) marked GND and two convex points must face out. - Connect the electrical wires as shown in Fig. 2, making sure
that all wire connectors are secured. If your junction box has a
ground wire (green or bare copper), connect fixture’s ground wire
to it. Otherwise, connect fixture’s ground wire directly to
mounting plate (A) using green screw provided. - Tuck wire connections neatly into junction box.
- Place canopy (L) over mounting plate (A) and secure with screws
(K). - Turn on power to the junction box and test the fixture.
Product Usage Instructions: Semi Flush Mount Installation
- Loosen screws (K) to remove mounting plate (A) from canopy
(L). - Secure rod (M) into all thread (I).
- Thread canopy (L), metal plate (H), lock washer (E), metal
washer (D) and hex nut (C) into all thread on top of rod (M). Then
secure hex nut (C) by using wrench (J) (Not included). - Attach mounting plate (A) to junction box (Not included) with
mounting screws (B) (Size: #8-32N*L0.5). The side of mounting plate
(A) marked GND and two convex points must face out. - Connect the electrical wires as shown in Fig. 2, making sure
that all wire connectors are secured. If your junction box has a
ground wire (green or bare copper), connect fixture’s ground wire
to it. Otherwise, connect fixture’s ground wire directly to
mounting plate (A) using green screw provided. - Tuck wire connections neatly into junction box.
- Place canopy (L) over mounting plate (A) and secure with screws
(K). - Turn on power to the junction box and test the fixture.
INSTALLATION INSTRUCTIONS
Item#N7524-716-L (Convertible Lamps for Pendant) (New. 2022/05/19) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR.
MOUNTING THE FIXTURE (Fig.1)
Fig. 1
1. Shut off power at the fuse box or circuit breaker box and Set# A-021-172D
remove the old fixture including the mounting hardware. 2. Carefully unpack your new fixture and lay out all the parts
-Mounting plate -Ground screw -Mounting screws *2
on a clean area. Take care not to misplace any small parts
necessary for installation.
A
3. Loosen screws (K) to remove mounting plate (A) from
B
canopy (L).
C
J
4. Determine desired hanging height and thread rods (F1, F2
D
and F3) to all thread (I) on top of fixture body. Carefully
E
K
pass wires through each rod during assembly. Secure
H
L
swivels (G) onto rods (F1).
5. Align canopy (L) and metal plate (H) followed by lock washer (E) and metal washer (D) onto swivels (G) and
G
secure with hex nuts (C) via wrench (J) (Not included). 6. Attach mounting plate (A) to junction box (Not included)
with mounting screws (B) (Size: #8-32N*L0.5″). The side of mounting plate (A) marked “GND” and two convex points
F1
Rod# W30-1-172 *2 (F1) W30-1-172 *4 (F2) W30-H-172 *2 (F3)
must face out.
CONNECTING THE WIRES (Fig. 2)
7. Connect the electrical wires as shown in Fig. 2, making
F2
sure that all wire connectors are secured. If your junction
box has a ground wire (green or bare copper), connect
fixture’s ground wire to it. Otherwise, connect fixture’s
F3
ground wire directly to mounting plate (A) using green
I
screw provided.
8. Tuck wire connections neatly into junction box.
FINISHING THE INSTALLATION (Fig.1)
9. Place canopy (L) over mounting plate (A) and secure with
screws (K).
Your installation is now complete. Return power to the
junction box and test the fixture.
Fig. 2
Note: Illustration (Fig.1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
FIXTURE WIRES Black or Smooth
Dimmable with ELV and/or LED compatible wall dimmer switches.
FIXTURE WIRES White or Ribbed HOUSE WIRES Black (Hot)
FIXTURE WIRES Bare Copper (Ground) HOUSE WIRES White (Neutral)
HOUSE WIRES Green (Ground)
Page:1/2
LA-3550E
INSTALLATION INSTRUCTIONS
Item# N7524-716-L (Convertible Lamps for Semi Flush Mount) (New. 2022/05/19) READ AND SAVE THESE INSTRUCTIONS
W AR NI N G ! S HU T P O WE R O F F AT F U S E O R CI R C UI T B R E AK E R .
AVERTISSEMENT! COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEU
PREPARATION (Fig.3)
1. Loosen screws (K) to remove mounting plate (A) from Fig. 3
canopy (L). 2. Secure rod (M) into all thread (I). 3. Thread canopy (L), metal plate (H), lock washer (E), metal
Set# A-021-172D -Mounting plate -Ground screw -Mounting screws*2
washer (D) and hex nut (C) into all thread on top of rod (M).
Then secure hex nut (C) by using wrench (J) (Not included). (Fig. 3)
A
4. Attach mounting plate (A) to junction box (Not included)
B
with mounting screws (B) (Size: #8-32N*L0.5″). The side of
C
J
mounting plate (A) marked “GND” and two convex points
D
must face out.
E
K
CONNECTING THE WIRES (Fig. 2)
H
5. Connect the electrical wires as shown in Fig. 2, making
L
sure that all wire connectors are secured. If your junction
box has a ground wire (green or bare copper), connect
fixture’s ground wire to it. Otherwise, connect fixture’s
ground wire directly to mounting plate (A) using green
M
screw provided.
6. Tuck the wire connections neatly into junction box.
I
FINISHING THE INSTALLATION (Fig.3)
7. Place canopy (L) over mounting plate (A) and secure with
screws (K).
Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig.3) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.
Dimmable with ELV and/or LED compatible wall dimmer switches.
Page:2/2
LA-3550E
