Et2 E34207 Chimes 34 Inch Smart Chandelier User Guide

ET2 E34207 CHIMES 34 Inch Smart Chandelier

PLEASE CONSULT AN ELECTRICIAN BEFORE INSTALLATION
LAMPING: CCT WHITE TUNABLE LED INTEGRATED 73W
Vinput: 120-277V

Before Getting Started

Read the instructions carefully prior to assembling the product.

• When you open the package with a sharp tool like acutter knife, be careful not to damage the components inside.
• Carefully remove all packaging materials and retain for future use.
• Keep all hardware parts and packaging out ofreach of small children.
• Choose a clean, level, spacious assembly area. Avoid hard surfaces that may damage the product.
• Ensure that you have all required contents for complete assembly.
• Take care when lifting. Assemble the product in close proximity to where you intend to position the item.
• Do not over tighten the screws and bolts as this may damage the threads.
• Do not let children play with this product.

Risk of suffocation!
Keep any packaging materials away from children.

Lamp Care Instructions

• Carefully read through the instruction sheet before assembly and using the product.
• Caution there is a risk of shock. Disconnect from power source before assembling or cleaning.

WARNING: Wires need to be connected to driver found in  canopy and should not be  connected directly to power source or a short may occur.

• Only use the recommended bulb type and do not exceed the maximum wattage as it could cause fire.
• Do not plug the product in if cord is torn or frayed.

Cleaning & Maintenance

• On polished finishes, often using talc powder reduces the appearance of fingerprints and other smudges.
• For respective shade surfaces, use the appropriate cleansers, i.e. glass cleaner, acrylic polish, and wood polish.
• Clean with soft cloth and a mild detergent.
• DO not use abrasive cleaner.
• Periodically (every 90 days) make sure that the screws are fully tightened.
• Prolonged exposure to heat sources may cause glazing, melting and scorching, or even cause color to fade.

Contents

Before getting,started,ensure the package contains the following components:

INSTALLATION

• STEPS 1Combine stem lengths to meet your desired mounting height

• STEPS 2
• STEPS 3

WIRING DIAGRAM

(ONLY FOR REFERENCE)
DO NOT ATTEMPT TO CUT FACTORY CONNECTIONS WITHOUT QUALIFIED KNOWLEDGE. MODIFICATIONS MADE TO THIS PRODUCT WITHOUT THE CONSENT OF THE MANUFACTURER WILL VOID WARRANTY
E34207BKNOTE: Notice the wiring diagram and wire color when connecting wires between Wiz controller and LED source

IMPORTANT

• Make sure that your dimmable LED fixture is paired with the correct dimmer type

Must be installed by a licensed electrician with knowledge of electronic lighting systems