JYL9536A Homer 13 Inch 1-Light Modern Industrial Iron LED Dome Globe Pendant
Product Information
The lighting fixture model numbers are JYL9536A, JYL9536B,
JYL9536C, and JYL9536D. The product dimensions are 13 inches in
diameter and can be adjusted to a height between 21.5 and 51.5
inches. The package includes a mounting bracket, fixture body,
ground screw, machine screws, metal shade, wire connectors, screws,
canopy unit, glass diffuser, flat iron ring, rods, and cap
nuts.
The external flexible cable or cord of this lamp cannot be
replaced. If the cord is damaged, the lamp shall be destroyed.
Product Usage Instructions
- Warning: We recommend installation of this
lighting fixture be done by a licensed electrician. Switch off the
main electrical supply from the main fuse box/circuit breaker
before installation. - Inspect the item carefully before attempting to install. If
there is any damage or obvious defect, do not install. The item may
not be returned once it has been installed. - Make sure that you have all parts indicated before you begin
assembly of this item. This item should be assembled on a soft
surface to prevent scratching the finish during assembly. - Connect the Hot Black or Red Outlet Supply Wire to the black
wire connector and the Neutral White Outlet Supply Wire to the
white wire connector. - Attach the mounting bracket to the canopy unit with the
provided screw. - Connect the wire with wire connector.
- Attach the metal shade to the socket, secure with socket ring,
then place the bulb to the socket. - Insert the glass diffuser to the flat iron ring, secure with
small plate. - Attach the flat iron ring to the metal shade with cap nut.
- Grounding Instructions:
- For installation in the United States: Wrap ground wire from
outlet box around green ground screw on mounting bracket, no less
than 2 inches from wire end. Tighten ground screw. If fixture is
supplied with a ground wire, connect to outlet ground wire with a
wire connector. - For installation in Canada: If fixture is supplied with ground
wire, wrap ground wire around green grounding screw on mounting
bracket. Tighten ground screw.
- For installation in the United States: Wrap ground wire from
WARNING WE RECOMMEND INSTALLATION OF THIS LIGHTING FIXTURE BE DONE BY A LICENSED ELECTRICIAN. WARNING *** SWITCH OFF THE MAIN ELECTRICAL SUPPLY FROM THE MAIN FUSE BOX/CIRCUIT BREAKER BEFORE INSTALLATION. INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE To clean the outside of the fixture, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the surface of the fixture. To clean the inside of the fixture, first disconnect power to the fixture by turning off the circuit breaker or by removing the fuse at the fuse box. Next, use a dry or slightly dampened clean cloth (use clean water, never a solvent) to wipe the interior surface of the fixture. Do not use any cleaners with chemical, solvents or harsh abrasives. Use only a dry soft cloth to dust or wipe carefully.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced If the cord is damaged, the lamp shall be destroyed
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE
PICTURE QUANTITY
A
mounting bracket
1X
I
fixture body
1X
B ground screw
1X
C machine screw
2X
J
metal shade
1X
D wire connector
3X
K
socket ring
1X
E
screw
2X
L
bulb
1X
F
canopy unit
M glass diffuser
1X
1X
N
flat iron ring
1X
G
12″ rod
2X
O
cap nut
3X
H
6″ rod
2X
1/2
Model#: JYL9536A & JYL9536B JYL9536C & JYL9536D
Product Dimensions: 13″D*21.5-51.5″H
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 20 minutes.
12.. ACtotancnhectht ethme o1u2n” triondg (bGra)caknedt (6A”)rotodt(hHe)jutongcetitohnerb,othxewnitahttmacahch1i2n”ersocdre(Gw)(tCo).the canopy unit (F) and 6″ rod (H)
to the fixture body (I).
Connect, Hot, Black or Red Outlet Supply Wire to:
Connect, Neutral, White Outlet Supply Wire to:
Black
White
* Parallel Cord (round & smooth)
* Parallel Cord (square & ridged)
G
Clear, Brown, Gold or Black without Tracer (colored stripes)
Clear, Brown, Gold or Black with Tracer (colored stripes)
Insulated Wire (not green) with copper metal conductor
Insulated Wire (not green) with Silver metal conductor.
*Note: When parallel wire ( SPT I & SPT II ) is used. The neutral wire is square shaped
and ridged and the hot wire will be round in shape and smooth. ( See Illustration on left. )
Grounding Instructions: a) For installation in the United States: Wrap ground wire from outlet box around green ground screw(B) on mounting bracket, no less than 2″ from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector. b) For installation in Canada: If fixture is supplied with ground wire, wrap ground wire around green grounding screw on mounting bracket. Tighten ground screw.
H I
3. Connect the wire with wire connector (D).
4. Attach the mounting bracket (A) to the canopy unit (F) with screw (E).
J
5. Attach the metal shade (J) to the socket, secure with socket ring (K), then place the bulb (L) to the socket. K
6. Insert the glass diffuser (M) to the flat iron ring (N), secure with small plate (N1).
7. Attach the flat iron ring (N) to the metal shade (J) with cap nut (O).
L
PLEASE USE TYPE”A” BULB MAX 60-WATT OR CFL BULB MAX 13-WATT OR LED BULB MAX 9-WATT,
M
THERE IS 1PC LED 9-WATT BULB IN THE BOX
N
ENJOY YOUR LAMP 2/2
O N1
