JBL Professional AC895-WH Two-Way Full-Range Loudspeaker
Key Features
- Compact enclosure
- 209 mm (8 in) LF transducer
- 90° x 50° Progressive Transition™ Field Rotatable Waveguide with a 25 mm (1 in) exit 25mm (1″) voice-coil compression driver
- Dual Neutrik NL4 connectors plus screw terminals
- Multiple Attachment Points for Ultimate Flexibility
Applications
- Performing Spaces
- Clubs & Bars
- Houses of Worship
- Multi Media Spaces
- Retail & Hospitality Spaces
- Presentation Suites
- Educational Facilities
AC895 is a compact 2-way full-range loudspeaker system comprised of one 209 mm (8 in) low frequency driver and one 25 mm (1 in) exit/25 mm
(1 in) voice-coil compression driver. The rotatable PT™ Progressive Transition waveguide provides 90° by 50° coverage in vertical cabinet orientation. High-slope passive crossovers minimize band overlap and well-controlled offaxis response.
The cabinet is fitted with M10 threaded suspension points. Four threaded inserts located on back of the enclosure allow attachment of a MultiMount® or similar type mounting.
AC895 is part of JBL’s AE Application Engineered Series, a versatile e family of loudspeakers for a wide variety of fixed installation applications.
JBL continually engages in research related to product improvement. Some materials, production methods and design refinements are introduced into existing products without notice as a routine expression of that philosophy. For this reason, any current JBL product may differ in some respect from its published description, but will always equal or exceed the original design specifications unless otherwise stated.
Specifications
| System: | |
| Frequency Range (-10 dB)1: | 70 Hz – 20 kHz |
| Frequency Response (±3 dB)1: | 90 Hz – 18kHz |
| System Sensitivity (1w @ 1m)1: | 94 dB |
| Nominal Impedance: | 8 ohms |
| Maximum SPL(1m)2: | 116 dB (122 dB peak) |
| Long-Term System Power Rating (IEC)3: | 150 W/300 W/600 W
(Continuous/Program/Peak) |
| 2 hr Power Rating4: System Power Rating (AES): | 250W (1000W peak), 2 hrs |
| Coverage Pattern: | 90° x 50° (H x V) |
| Crossover: | 2 kHz |
| Transducers: | |
| Low frequency driver: | 1 x 8″ woofer (P/N: 5055470), 209 mm (8 in) driver with 50 mm (2 in) voice-coil |
| High frequency driver: | 1 x 2414H-C driver with 25 mm (1 in) exit/25 mm (1 in) voice-coil |
| Physical: | |
| Input Connector: | Dual Neutrik NL4MP connectors plus covered bar- rier trip terminals |
| Enclosure: | 15 mm multi-ply hardwood plywood |
| Grille: | Powder coated, 1.5mm perforated steel, with acous- tically transparent black foam backing |
| Finish: | Textured black paint finish. White (-WH) available upon request. Not available with WRC & WRX finish. |
| Suspension / Mounting: | 14 x M10 and 4 x M10 for Wall Mount Bracket. Optional U-bracket, overhead suspension bracket, and wall-mount bracket |
| Dimensions (H x W x D): | 470 mm x 265 mm x 254 mm
18.5 in x 10.4 in x 10.0 in |
| Net Weight: | 10.2 kg (22.4 lbs) |
- Full space (4π) conditions
- Calculated maximum SPL based on rated power handling
- IEC shaped pink noise with 6dB CF for 100hrs
- AES standard, one decade pink noise with 6 dB crest factor within device’s operational band, free air. Standard AES 2 hr. rating plus long-term 100 hr. rating are specified for low-frequency transducers.
Graphs


Dimensions

Frequently Asked Questions
The JBL Flip 5, one of our favorite portable speakers, lasts 12 hours on a single charge, while the Charge 5, a somewhat newer and larger model, lasts an astonishing 20 hours before needing to be recharged.
A loose connection at the back of your JBL speaker may be the cause of any crackling or static noise it is making. Dropping or improper handling of the speaker may be the cause of this. You’ll have to remove the speaker’s back in order to fix this. Think about having it repaired by a professional or a licensed dealer.
Generally speaking, you’ll want your speakers to be positioned on a firm surface that is between 24 and 48 inches high, looking squarely in your direction. Maintaining a few inches of space between the back of your speakers and a wall or other hard surface will also increase bass response.
Leaving your JBL Charge 4 plugged into a power source is safe. Because the JBL Charge 4 stops charging when it reaches full charge and discards any electrical current received, it doesn’t overload.
You can carry your music with you everywhere you go, whether you’re on land or in the water, thanks to the JBL Clip 2’s 8 hours of runtime and complete waterproofness. Use Bluetooth to stream music wirelessly, or use the audio cable to connect it to any smartphone or tablet.
JBL speakers can be fixed, yes. To begin with, you should make sure your speaker is still covered by warranty. If so, you can ask JBL to fix something under warranty.
If JBL speakers are left idle for ten minutes or more, they will automatically turn off. There is no reason to be concerned about this power-saving option.
A row of LED lights on the front of your speaker will turn on once it is plugged in and remain on until charging is finished.
A lithium-ion battery may suffer long-term consequences of this. Therefore, you should refrain from doing that to protect battery life. This means that it is not a good idea to leave a wireless speaker charging over the course of every day of the week.
Even when the battery is fully charged, continuing to charge the speaker could cause the battery to overheat and perhaps explode.
Portable speakers are permitted on both carry-on luggage and checked luggage, as long as they aren’t too huge, according to the Transportation Security Administration, a branch of the U.S. government that oversees airport and airline security.
Simply use your smartphone to charge the wireless speaker. All you have to do is attach your smartphone to it using the USB cord. You won’t need to worry about using a charger if you do it this way. You don’t need to buy anything more because you already carry a phone with you everywhere.
You can save battery troubles and expense by simply charging the battery using a USB connector. Other USB devices can be charged directly from the JBL Charge speaker thanks to its USB connector. Consequently, you won’t need a second charger to keep your devices charged.
Once more, the speaker can only be submerged up to one metre deep. However, if the speaker is not buried up to one metre, this does not imply that it can be submerged for more than 30 minutes. If the speaker comes into contact with any water, you should only allow it to do so for a 30-minute period.
Call our Customer Service Center at 1-800-336-4525 from 8:00 a.m. to 8:30 p.m., EST, Monday through Friday, or 8:00 a.m. to 5:00 p.m., EST, on Saturday to start a return. You will receive a return authorization number (RA#) and a pre-paid return shipping label from our customer service agent.




















