PKMBL125 Big Grabber Closed End Mandrel
Product Information
| ID Number | PKMBL125 |
|---|---|
| Number of Parts | 1 |
| Type | Internal Bushing |
| Thru Hole | M6 x 1.0 Female Threaded Blind Hole |
| Notes | This part threads onto the end of the Big Grabber Mandrel for stabilizing the end of closed end projects with 12.5mm tubes. |
Product Usage Instructions
- Identify the Big Grabber Mandrel and ensure it is properly
installed for use. - Take the Internal Bushing and align it with the end of the Big
Grabber Mandrel. - Gently thread the Internal Bushing onto the end of the Big
Grabber Mandrel in a clockwise direction. - Tighten the Internal Bushing until it is securely attached to
the Big Grabber Mandrel. - Proceed with your closed end project using 12.5mm tubes.
- After completing your project, carefully remove the Internal
Bushing by turning it counterclockwise.
PICTURE IS AN APPROXIMATE REPRESENTATION. NOT TO EXACT SCALE OR PROPORTION. ALL MEASUREMENTS IN INCHES. BUSHING DIAMETERS (TOP ROW) ARE OPTIMAL AND SHOULD VARY BY NO MORE THAN .002″ WHEN NEW.
ID NUMBER PKMBL125
NUMBER OF PARTS
1
TYPE: INTERNAL BUSHING
THRU HOLE M6 X 1.0 FEMALE THREADED BLIND HOLE
NOTES: THIS PART THREADS ONTO THE END OF THE “BIG GRABBER” MANDREL FOR STABILIZING THE END OF CLOSED END PROJECTS WITH 12.5MM TUBES.
PART NAME
()
()
()
()
()
()
END
()
()
()
()
()
()
()
()
AND (QUANTITY)
BUSHING (1)
SECTION NAME
OUTER DIMENSIONS
DIAMETER 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.452″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″
LENGTH 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.437″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″ 0.000″
ASSOCIATED KITS:
Last Published: Tuesday, May 9, 2023
