Martec Lighting Vancouver Led Wall Light Installation Guide

MARTEC Lighting Vancouver LED Wall Light

We strongly recommend that you read this manual carefully before installation.
Installation MUST be carried out by a qualified and licensed electrician.

Models Parameters
MLXVE27FSM    60W IP44 Exterior Wall Light (E27 lampholder)

Installation Instructions

Steps

1. Switch off the mains.
2. Unscrew and remove the mounting bracket using the allen key supplied.
3. Mount the bracket on the desired surface using the screws supplied.
4. Wire to main as illustrated.
5. Scew E27 lamp into the lamp holder.
   (lamp not included)
6. Attach fitting back onto the bracket using the allen key supplied.
7. Switch on the mains.

Accessories Included

Data Table

WARNING

• Installation of product MUST follow SAA standards and meet local authority regulations.
• Installation MUST be carried out by a qualified and licensed electrician.
• Light MUST be earthed.
• Light MUST be firmly installed to a flat solid surface, wall or ceiling.
• DO NOT immerse any part of the light fitting into water or any form of liquid.
• DO NOT look directly into the LED light.
• The warranty is VOID if product is not installed according to this installation guide.

2 Year Replacement Warranty

Visit our website for details https://www.martecaustralia.com.au/warranty-statement/

E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au

References

• Martec® Australia | Life, enhanced®
• Returns & Warranties Policy | Martec Australia | Ceiling Fans