Robolift Erolly 100 Neigbar Motorised Tilt Table Floor Stand Instruction Manual

eRolly 100 Neigbar Motorised Tilt Table Floor Stand

Product Information: Robolift eRolly 100 neigbar

The Robolift eRolly 100 neigbar is a motorised tilt table floor
stand. It is designed to provide convenient and adjustable support
for various objects or equipment. The stand is capable of tilting
to different angles, allowing users to position their items
according to their needs.

The product is manufactured by Vision24 GmbH, a company
specializing in multimedia, internet, and information systems. The
company is located at Albert-Einstein-Str. 3, D-64560 Riedstadt.
For further inquiries, you can contact them via phone at +49 6158
918810, fax at +49 6158 91881-29, or email at [email protected].
More information about the product can be found on their website at
www.robolift.de.

Product Usage Instructions

1. Before starting the installation process, ensure that all the
   required components are present.
2. Use the provided TENTE M10 screws (x4), DIN 125 M10 + M8 screws
   (x16), DIN 912 M6x20 screws (x12), DIN 912 M8x25 screws (x4), DIN
   7380 M8 screws (x2), 4xM8x40mm DIN 912 screws (x1 set), washers
   (14xWasher M8 + 4xWasher M10), and Grover washers (2xGroverWasher
   M8) for assembly.
3. Use an ALLEN M6 wrench to tighten the ALLEN M6 screws and an
   ALLEN M8 wrench for the ALLEN M8 screws.
4. Attach the TENTE HEX M10 accessory using a Spanner M10.
5. Configure the table by following the provided diagram (Table
   configuration/mesa).
6. Press the designated button (PRESIONAR PUSH SPINGI) to lock the
   table at the desired tilt angle. To release and adjust the tilt,
   hold the button and slacken the table.
7. For cable management, use the provided DRAG CHAIN accessory and
   attach it using ALLEN M4 screws (x4), washers (8xWasher DIN125 M4),
   and nuts (4xNut M4).
8. The power input of the Robolift eRolly 100 neigbar is AC
   100V-240V, 1.500mA, 50/60Hz. The output is DC29V – 2A. The maximum
   load capacity is 6.000N. The power rating is 24 DVC, Max: 2AMP. The
   product has an IP44 rating.

Follow these instructions carefully to ensure proper
installation and usage of the Robolift eRolly 100 neigbar. For any
further assistance or inquiries, refer to the manufacturer’s
contact details provided above.

Robolift eRolly 100 neigbar
Motorised tilt table loor stand
Soporte motorizado inclinable con ruedas Tavolo interattivo motorizzato a pavimento Moottoroitu ja kallistuksella varustettu näytön teline Support mobile pivotant
Installation manual
Manual de instalación Manuale di installazione Asennusopas Manuel d’installation.
1

Robolift eRolly 100 neigbar

619,88

1350,0

1415,0

700,00

1022,55

951,92

951,92

619,88

765,41

1022,55

951,92
100 kg

951,92
34 – 95″

Robolift eRolly 100 neigbar
CONTENIDO/CONTENTS/CONTENUTO/SISÄLLYS/CONTENU:

TENTE M10 (x4) DIN 125 M10 + M8 (x16) DIN 912 M6x20 (x12) DIN 912 M8x25 (x4) DIN 7380 M8 (x2) 4xM8x40mm DIN 912 14xWasher M8+4xWasher M10 2xGroverWasher M8
HERRAMIENTAS NECESARIAS/TOOLS NEEDED/ATTREZZI NECESSARI/TARPEELLISET TYÖKALUT/OUTILS NÉCESSAIRES:

ALLEN M6

ALLEN M8

Spanner M10

3

Robolift eRolly 100 neigbar
x4
1
TENTE HEX M10

Spanner M10

2
ALLEN M6 x12
8xM6x16mm DIN 912+washer DIN125 A M6 4xM8x16mm DIN 912 + washer DIN 125 A M8

Robolift eRolly 100 neigbar
3

x12

4xM8x40mm DIN 912 14xWasher M8+4xWasher M10 2xGroverWasher M8

ALLEN M8 ALLEN M6

Washer M10

Grover

4

CALIBR ACIÓN MOTOR / MOTOR CALIBRATION

Presionar 3 seg botón bajada en posición baja / Hold down button for 3 sec in low position

5

Robolift eRolly 100 neigbar
5
Table configuration/mesa

2

3

1

PRESIONAR PUSH SPINGI
TYÖNNÄ POUSSER

MANTENER PRESIONADO HOLD TIENI PIDÄ
MAINTENIR

SOLTAR Y AFLOJAR RELEASE AND SLACKEN RILASCIARE E RALLENTARE
VAPAUTA JA AVAA RELÂCHER ET RELÂCHER

6
x12
4xM8 or 4xM6

ALLEN M8 ALLEN M6

Robolift eRolly 100 neigbar
8

Display

Wifi Acces Point

Computer

Cadena caBLES: Accesorio // DRAG CHAIN: ACCESORY
ALLEN M4
x4
4xM4x16mm DIN 912 8xWasher DIN125 M4 4xNut M4
7

Robolift eRolly 100 neigbar
DIAGRAMA ELÉCTRICO DEL MOTOR / ELECTRICAL DIAGRAM OF THE LIFTING SYSTEM / DIAGRAMMA DELL’IMPIANTO ELETTRICO DI SOLLEVAMENTO / NOSTOJÄRJESTELMÄN TEKNINEN KAAVA / SCHÉMA ÉLÉCTRIQUE DU SYSTÈME DE REHAUSSE.

Input: AC 100V-240V, 1.500mA; 50/60Hz Output: DC29V – 2A

Max. Load: 6.000N; IP44 Power Rating 24 DVC, Max: 2AMP
Vision24 GmbH Multimedia-, Internet- und Informationssysteme Albert-Einstein-Str. 3, D-64560 Riedstadt Tel. +49 6158 918810 Fax +49 6158 91881-29 Email: [email protected] Web: www.robolift.de

References

• Robolift: Beamerlift, Deckenlift für Beamer, Monitore, TV & Kameras