True Fine Td20025w 6 Inch 1 Light Black Bathroom Wall Sconce With Clear Prismatic Glass Shade Instruction Manual

TD20025W 6 Inch 1 Light Black Bathroom Wall Sconce with Clear Prismatic Glass Shade

Product Information: Vanity Lighting

The Vanity Lighting is a lighting fixture designed for use in
bathrooms and dressing rooms. It comes with a mounting plate,
screws, wire nuts, and hardware necessary for installation. The
fixture is compatible with standard-base bulbs (not included). The
product is made in China and comes with an instruction manual.

Product Usage Instructions

1. Before beginning assembly of the product, make sure all parts
   are present. Compare parts with package contents list and hardware
   contents list. If any part is missing or damaged, do not attempt to
   assemble the product.
2. Estimated Assembly Times: 25 minutes
3. Tools Required for Assembly (not included): Flathead
   screwdriver, Phillips screwdriver, Pliers, Electrical tape, Wire
   cutters, Safety glasses. Helpful Tools (not included): Wire
   strippers, Step ladder.
4. Attach the Mounting plate (DD) to the outlet box (not included)
   with the long mounting screws (CC).
5. Strip 3/4 in. of insulation from wire ends. Twist stripped ends
   together with pliers (not included), black to black (power) and
   white to white (neutral). Attach copper wire to ground wire.
   Helpful hint: If necessary, attach copper ground wire to grounded
   outlet box.
6. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires
   together.
7. Align the 2 screws(AA) through the holes of the back plate, and
   fix them with screw nuts.
8. Remove socket ring (C). Install shade (B) over socket of
   fixture (A), then secure with socket ring (C).
9. Install light bulb (not included). Use three standard-base
   bulb.

For any issues or concerns, please contact customer service at
[email protected].

Vanity Lighting

Instruction Manual

HARDWARE CONTENTS(shown actual size)

ABA

BBB

CBC

DBD

Print in china

PACKAGE CONTENTS

Long monting x 2 screw

Wire nut x 3

Long monting x 2 screw

Mounting plate (Not actual size) x 1

SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.

WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]

ASSEMBLY INSTRUCTIONS

1. Attach the Mounting plate (DD) to the

1

outlet box (not included) with the long

mounting screws (CC).

Hardware Used

CC Long mounting screw

x 2

DD Mounting plate

x 1

2. Strip 3/4 in. of insulation from wire ends. 2 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.

3. Attach wire nuts (BB).Tape wire nuts (BB) 3 and wires together.
Hardware Used

BB Wire nut

x3

BB

DD CC

ASSEMBLY INSTRUCTIONS

4. Align the 2 screws(AA) through the holes 4

of the back plate, and fix them with screw

DD

nuts

A

Hardware Used

AA Long mounting screw

x 2

DD Mounting plate

x 1
AA

5. Remove socket ring (C). Install shade (B) 5

over socket of fixture (A), then secure with

A

socket ring (C).

A

B C
6. Install light bulb (not included). Use three 6 standard-base bulb.

Print in china

References

• Digital Services, Technology and Consulting | Reply