TD10038W Dean 24 Inch 3-Light Black Bathroom Vanity Light
Product Information
The 3-Light Vanity Light comes with a fixture (Part A), three
glass shades (Part B), six screws (Part C), six semicircle parts
(Part D), and a mounting plate. The package also includes two long
mounting screws, three wire nuts, and safety information. The
product is made in China and requires standard-base light bulbs,
which are not included.
Product Usage Instructions
- Before assembling or installing the product, ensure that all
parts are present and undamaged by comparing them with the package
contents and hardware contents lists. - Attach the glass shades to the fixture by clamping each shade
with a semicircle part and locking it with a screw. - Attach the mounting plate to the outlet box using the long
mounting screws. - Strip 3/4 inch of insulation from the wire ends, twist the
stripped ends together using pliers, and attach the black wire to
the power wire and the white wire to the neutral wire. Attach the
copper wire to the ground wire and, if necessary, to the grounded
outlet box. - Attach wire nuts to the wires and tape them together.
- Align the two screws through the holes of the back plate and
fix them with screw nuts. - Install three standard-base light bulbs.
Note: The assembly time is estimated to be 25 minutes. Tools
required for assembly include a flathead screwdriver, Phillips
screwdriver, pliers, electrical tape, wire cutters, and safety
glasses. Helpful tools that are not included are wire strippers and
a step ladder. For any queries, contact customer service at
[email protected].
3-Light Vanity Light
Instruction Manual
HARDWARE CONTENTS(shown actual size)
ABA
BBB
CBC
DBD
Print in china
PACKAGE CONTENTS
A
B
PART A Fixture B Glass shade C Screw D Semicircle part
DESCRIPTION
C
D
QUANTITY 1 3 6 6
Long monting x 2 screw
Wire nut x 3
Long monting x 2 screw
Mounting plate (Not actual size) x 1
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the product.
WARNING
· TURN OFF ELECTRICITY at main fuse box (or circuit breaker box) before beginning installation by removing fuse (or switching off circuit breaker). · MINIMUM 90°C SUPPLY CONDUCTORS.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Times: 25 minnutes Tools Required for Assembly (not included): Flathead screwdriver , Phillips screwdriver, Pliers, Electrical tape, Wire cutters, Safety glasses. Helpful Tools (not included): Wire strippers, Step ladder.
Customer Service: [email protected]
ASSEMBLY INSTRUCTIONS
1. Put glass shade (B) onto fixture (A), clamp 1 the glass shade (B) with semicircle part (D), and finally lock it with screw (C).
2. Attach the mounting plate (DD) to the
2
outlet box (not included) with the long
mounting screws (CC).
Hardware Used
CC Long mounting screw
x 2
DD Mounting plate
x 1
3. Strip 3/4 in. of insulation from wire ends. 3 Twist stripped ends together with pliers (not included), black to black (power) and white to white (neutral). Attach copper wire to ground wire. Helpful hint: If necessary, attach copper ground wire to grounded outlet box.
A
B D C
DD CC
ASSEMBLY INSTRUCTIONS
4. Attach wire nuts (BB).Tape wire nuts (BB) 4 and wires together.
Hardware Used
BB Wire nut
x3
BB
5. Align the 2 screws(AA) through the holes 5
of the back plate, and fix them with screw
nuts
DD
Hardware Used AA
AA Long mounting screw
x 2
DD Mounting plate
x 1
A
6. Install light bulbs (not included). Use three 6 standard-base bulbs.
B
Print in china
Digital Services, Technology and Consulting | Reply
