EC0562 Wall Sconce with Clear Glass Shade
Product Information:
This product is a lamp with an item number of EC0562. It comes
with a mounting stripe (A), lamp body (H), shade (I), socket ring
(J), black wire (B), white wire (C), bare ground wire (E), two
supporting screws (G), wire connector (D), and outlet box screws
(F). The lamp uses a Max 60W type A bulb or Max 9W self-ballasted
LED bulb.
Product Usage Instructions:
- Unscrew two supporting screw (G) from the mounting stripe (A).
Remove mounting stripe (A) from the lamp body (H), keep two
supporting screw (G) for later use. - Fasten the mounting stripe (A) to the outlet box using two
outlet box screws (F). - Connect the black wire (B) from the body (H) to black wire from
outlet box, the white wire (C) from the body (H) to white wire from
outlet box using wire connector (D) and connect bare ground wire
(E) from the body (H) to ground wire from outlet box using wire
connector (D), must loop one turn under the head of green screw on
the mounting stripe (A). - Place lamp body (H) over the outlet box, align the two holes on
the canopy on the lamp body(H) with two holes on the mounting
stripe (A), fasten them together by two supporting screw (G). - Unscrew socket ring (J) from the socket, put the shade (I) onto
the socket and secure them by socket ring (J). - Install the bulb (not included) into the socket. Use Max 60W
type A bulb or Max 9W self-ballasted LED bulb.
CCOI Item# EC0562 ASSEMBLY INSTRUCTIONS
Components List
Item
Image
I
Q Item
1
H
Image
Q Item
Image
Q
1
J
1
Hardware List (omit this part if no hardware included nor needed)
Item
Image
Q Item
Image
Q Item
Image
Q
D
3
F
2
G
2
Item
Image
A
Q Item 1
Image
Q Item
Image
Q
Tools Needed (omit this part if no tools included nor needed)
Item
Image
Q Item
Image
Q Item
Image
Q
ASSEMBLY STEPS
Step 1 Unscrew two supporting screw (G) from the mounting stripe (A). remove mounting stripe (A) from the lamp body (H),keep two supporting screw (G) for later use.
Step 2 Fasten the mounting stripe (A) to the outlet box using two. outlet box screws (F)
Step 3 Connect the black wire (B) from the body (H) to black wire from outlet box,the white wire (C) from the body (H) to white wire from outlet box using wire connector (D) and connect bare ground wire (E) from the body (H) to ground wire from outlet box using wire connector (D),must loop one turn under the head of green screw on the mounting stripe (A).
Step 4 Place lamp body (H) over the outlet box,align the two holes on the canopy on the lamp body(H) with two holes on the mounting stripe (A),fasten them together by two supporting screw (G).
Step 5 Unscrew socket ring (J) from the socket,put the shade (I) onto the socket and secure them by socket ring (J).
Step 6 Install the bulb (not included) into the socket.use Max 60W type A bulb or Max 9W self-ballasted LED bulb.
