Puig 2208 Wave Windscreen Instruction Manual

2208 Wave Windscreen

Product Information

This product is a windshield wave model for a vehicle. It comes
with various parts and screws for mounting.

Parts List:

Product Usage Instructions

Mounting Instructions

Follow these steps to mount the windshield wave model:

1. Ensure that you have all the necessary parts listed in the
   parts list.
2. Refer to the provided diagrams for the correct placement of
   each part.
3. Use the screws and nuts provided to secure the windshield
   screen and supports to your vehicle.
4. Tighten all screws and nuts properly to ensure a secure
   fit.
5. For additional support, use the adhesive microporous provided
   as instructed in the diagram.

Please note that it is recommended to check and maintain the
mounted windshield regularly whenever you maintain the vehicle.

If you have any further questions or need assistance, please
contact Puig at [email protected] (for international inquiries) or
[email protected] (for inquiries in the USA).

www.puig.tv www.puigusa.com
UNIVERSAL

[email protected] [email protected]

MOUNTING INSTRUCTIONS

REF 2208

WINDSHIELD WAVE MODEL

1 Person

Nº 10 Nº 13

ALLEN Nº24

15 min
No usar cola fijadora para tornillos al reaccionar con el plástico agrietándolo. Do not use thread-lock glue on screws/nuts as it can produce cracking on the plastic. Ne pas utiliser de colle de fixation pour les vis car elle réagit avec le plastique en le fissurant.
EASY
En las revisiones del vehículo es conveniente efectuar también el mantenimiento de apriete de toda la
Gracias por su atención.

whenever you maintain the vehicle.

Thanks for your attention.

.

1
ID PIEZA/PART

DESCRIPCIÓN

DESCRIPTION

QTY

REF

1

Pantalla carenabrís modelo WAVE

WAVE model windshield screen

1 10148A/F/H/NM3

2

Soporte izquierdo inox

Inox left support

3

Soporte derecho inox

Inox right support

4

Tornillo M6x8 ISO 7380

M6x8 ISO 7.380 screw

5

Tornillo M6x12 DIN912

M6x12 DIN912 screw

6

Tuerca M6 DIN934

M6 DIN 934 Nut

7

Arandela de plástico Ø6,1 xØ11 x1m

Ø6,1 xØ11 x1mm plastic washer

8

Tuerca hexago.grafil M8 DIN6923

M8 DIN6923 hexago.grafil nut

9

Tornillo allen M8x35 DIN912

M8x35 DIN912 allen screw

10

Arandela plana Ø18 xØ8 x1,5mm

Ø18 xØ8 x1,5mm flat washer

11

Casquillo Ø15 xØ8 x9mm

Ø15 xØ8 x9mm Arrowhead

12

Casquillo Ø12 xØ6 x8,5mm

Ø12 xØ6 x8,5mm Arrowhead

13

Tornillo M6x20 DIN 912

M6x20 DIN912 Screw

14

Adhesivo microporoso 30x30x7mm (**) 30x30x7mm microporous adhesive (**)

(**) PARA INTERFERIR ENTRE LA CÚPULA Y LOS RELOJES DE LA MOTO, SI ELLO FUERA NECESARIO/ TO INSERT BETWEEN THE SCREEN AND THE BIKE PANEL, IF IT WAS NECESSARY

Pg. 1/2

1 SOPORT2PIP2-L06
1 SOPORT2PIP2-R06 4 TORNIAI7380-300 2 TORNIAD912-0230
4 TUERCAEM6G-0213 4 ARANDEPNVCN0246 2 TUERCEG6923-249 2 TORNI-AD912-196 2 ARANDPD125A-018 2 CASQUI8159-0266 2 CASQUI—–0298 2 TORNI-AD912-489 2 ADHESI-M30DX7–

www.puig.tv www.puigusa.com
UNIVERSAL

[email protected] [email protected]

INSTRUCCIONES DE MONTAJE – MOUNTING INSTRUCTIONS – MONTAGEANLEITUNG
REF 0013

1
DISASSEMBLY DESMONTTAJE

A

A

Tornillería original Original screws

2 LOCK INCLINATION SYSTEMS (according to model ):
! OPTION A: ID5+ ID6
OPTION B: ID13+ID12+ID6
L T

2
ASSEMBLY MONTAJE

1

A
3
AASSSSEEMMBBLLYY MMOONNTTAAJJEE

7

12 6

L

4

!

! Atención al desmontar el faro / Attention when removing the headlight

!
5/13

3 7 4

2 MOUNTING SYSTEMS (according to model ):
OPTION A: ID9+ ID10+ ID11+ID8
! OPTION B: ORIGINAL SCREW+ID11 ( IF IT WAS NECESSARY)
ORIGINAL NUT

4
AASSESMEMBBLY MMOONNTATAJEJE

1

5/13

!

11

9/A

10

6/8/A

3
Tornillo para bloquear-fijar la inclinación de la pantalla / Bolt to lock the inclination of the windscreen

9/A
Pg. 2/2

9/A

A

Tornillería original Original screws

www.puig.tv www.puigusa.com

[email protected] [email protected]

KIT FOR KAWASAKI Z900RS ’18-

MOUNTING
REF 10931

INSTRUCTIONS

Nº 13

ALLEN
Nº26 2

B TORNILLERIA PUIG SUMINISTRADA CON KIT UNIVERSAL (REF.3243) PUIG SCREWS SUPPLIED WITH UNIVERSAL KIT ( REF. 3243)

ASSEMBLY

1 B

1
B A

1
ID PIEZA/PART

DESCRIPCIÓN

DESCRIPTION

QTY

REF

1

Tornillo M8x40 DIN 912

M8x40 DIN 912 screw

2 TORNI-AD912-475

Pg. 1/1

References

• Puig Hi-Tech Parts: Windscreens, accessories and tuning for your bike - Puig Hi-Tech Parts
• Puig Hi-Tech Parts: Windscreens, accessories and tuning for your bike - Puig Hi-Tech Parts