20630 Harlow Wall Sconce
Product Information
This product is a wall-mounted lamp that requires assembly and
installation. It is manufactured in China and comes with an E26
Type A bulb socket that can accommodate a maximum of 40W or an E26
CFL bulb with a maximum of 13W. The lamp shade, socket ring, and
bulb are not included in the package. The product comes with
mounting screws and a hidden line tube for secure installation.
Product Usage Instructions
- Before starting the assembly, refer to the wattage caution
label located near the lamp holder for maximum wattage. Do not
exceed the maximum wattage. - Attach the wall box to the wall using two mounting
screws(A). - Secure the hidden line tube to the wall box with two mounting
screws(B). - Connect tube (G) to (F) to the light body, then carefully pull
out excess wire from tube (G) while assembling to prevent the cord
from becoming twisted and snagged. - Nail (H) to the wall and secure (I) with two mounting screws
(J). - Connect the lamp shade (C) to the lamp holder and secure it
with the socket ring(D). The Socket Ring is located on the
socket. - Install a bulb (E) that fits the specifications mentioned
above. - Caution: Do not attempt to replace the bulb while the lamp is
plugged into a wall receptacle. - Care Instructions: Use only a soft cloth to clean; do not use
any chemicals or abrasive cleaners.
Following these instructions will ensure safe and optimal usage
of the wall-mounted lamp.
ASSEMBLY INSTRUCTION
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
1. Attach the wall box to the wall by using two mounting screws(A).
2. Secure the hidden line tube to wall box with two mounting screws(B).
3. Connect tube (G) to (F) to the light body ,then carefully pull out excess wire from tube (G) while assembling to prevent the cord from becoming twisted and snagged.
4. Nailed (H) to the wall and secure (I) with two mounting screws (J).
5. Connect the lamp shade (C) to the lamp holder and secure with the socket ring(D) .(Socket Ring located on socket)
6. Install bulb (E) not include.
E26 Type A.40W X 1 (Not included) E26 CFL 13W X 1 (Not included)
MADE IN CHINA
