20631 Harlow 8.625 Inch Brushed Gold-Colored Wall Sconce
Product Information
The product is a wall-mounted lamp that requires assembly. It
has a maximum wattage limit, which is indicated on a caution label
located near the lamp holder. To avoid damaging the lamp or causing
harm to yourself, it is important to follow the safety instructions
provided in the user manual. The lamp is compatible with E26 Type A
bulbs with a maximum wattage of 40W or E26 CFL bulbs with a maximum
wattage of 13W. The product is made in China.
Product Usage Instructions
- Attach the wall box to the wall using two mounting screws
(A). - Secure the hidden line tube to the wall box with two mounting
screws (B). - Connect tube (G) to (F) on the light body, then carefully pull
out excess wire from tube (G) while assembling to prevent the cord
from becoming twisted and snagged. - Nail (H) to the wall and secure (I) with two mounting screws
(J). - Connect the lamp shade (C) to the lamp holder and secure it
with the socket ring (D). The socket ring is located on the
socket. - Install the recommended bulb type (E) with the appropriate
wattage. Do not exceed the maximum wattage indicated on the caution
label located near the lamp holder. Do not attempt to replace the
bulb while the lamp is plugged into a wall receptacle. - Use only a soft cloth to clean the lamp. Do not use any
chemicals or abrasive cleaners.
By following these product usage instructions, you can ensure
that your wall-mounted lamp is safely assembled and ready for
use.
ASSEMBLY INSTRUCTION
CAUTION – Refer to the wattage caution label located near the lamp holder for maximum wattage – do not exceed the maximum wattage.
WARNING – Do not attempt to replace the bulb while the lamp is plugged into a wall receptacle CARE INSTRUCTIONS – Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
1. Attach the wall box to the wall by using two mounting screws(A).
2. Secure the hidden line tube to wall box with two mounting screws(B).
3. Connect tube (G) to (F) to the light body ,then carefully pull out excess wire from tube (G) while assembling to prevent the cord from becoming twisted and snagged.
4. Nailed (H) to the wall and secure (I) with two mounting screws (J).
5. Connect the lamp shade (C) to the lamp holder and secure with the socket ring(D) .(Socket Ring located on socket)
6. Install bulb (E) not include.
E26 Type A.40W X 1 (Not included) E26 CFL 13W X 1 (Not included)
MADE IN CHINA
