JYL1129A Troy 24 Inch Table Lamp
Product Information
- Model: JYL1129A
- Product Dimensions: 25Lx 8W x 24H
- Pieces Included:
- Lamp base (A) – 1
- Socket (B) – 1
- Shade (C) – 1
- Socket Ring (D) – 1
- Bulb (E) – 1 (LED 4-Watt bulb included in the box)
- Arm (F) – 1
- Recommended Bulb Type: On/Off Type A Bulb Max 40-Watt or LED
Bulb Max 9-Watt
Product Usage Instructions
- Inspect the product carefully before attempting to install. If
there is any damage or obvious defect, do not install. The item may
not be returned once it has been installed. - Unplug lamps before using any cleaning solutions.
- Dust shades with a feather duster or with an appropriate
vacuum-brush attachment. - Wipe with a soft, dry cloth and clean lamp bases with the
methods appropriate to the material. Avoid the use of chemicals and
household cleaners as they may damage the finish. - Before beginning assembly of the product, make sure all parts
are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated Assembly Time: 6 minutes. - Put the shade (C) on the Socket (B), then tighten the metal
ring (D) onto the Socket (B). - Insert the bulb (E) into the socket (B).
- Screw the arm (F) onto the lamp base (A).
- Put the light on a level surface to check if everything is
stable. - Enjoy your lamp!
WARNING INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed **This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
Model# JYL1129A Product Dimensions: 25″Lx 8″W x 24″H
A
Lamp base
1X
D
Socket Ring
1X
B
Socket
1X
E
Bulb
1X
C
Shade
1X
F
Arm
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE IS LED 4-WATT BULB IN THE BOX .
1
2
Step 1 Put the shade (C) on the Socket (B),then tighten the metal ring (D) onto the Sokcet (B) . Insert the bulb (E) into the socket (B). Screw the arm (F) onto the lamp base(A).
ENJOY YOUR LAMP
Step2 Put the light on a level surface to check if everything is stable.
