090521 Sansovino Table Lamp
Product Information
The Sansovino Table Lamp is an indoor lighting fixture designed
for use in residential or commercial spaces. It is equipped with a
polarized plug, with one blade wider than the other for safety
purposes. The lamp comes with various parts, including a finial,
shade, harp, lamp socket, lamp base, and line cord plug cover.
Please refer to Figure 1 in the user manual for a visual
representation of the parts.
Important Safety Instructions
- This lamp is for indoor use only.
- Do not modify the plug or power cord in any way.
- Do not exceed the recommended bulb wattage.
- Use only the type of bulb specified.
- Keep flammable materials away from the bulb.
- Do not open the product or alter the wiring in any manner.
- Follow precautions provided with the power cord if using an
extension cord.
Unpacking
When unpacking the lamp, please handle with care and ensure that
you locate all the included parts before disposing of the packaging
materials.
Assembly Procedure
- Install the harp (Part C) onto the lamp socket (Part D).
- Attach the shade (Part B) onto the harp (Part C).
- Secure the finial (Part A) onto the harp (Part C).
- Insert the bulb into the lamp socket (Part D).
- Remove the plug cap (Part E) from the plug.
Caring for and Cleaning
- To clean the lamp, use a soft dry cloth.
- Avoid using cleaners or scouring pads.
- Before changing the bulb, make sure to unplug the lamp and
allow the bulb to cool.
Troubleshooting
If you encounter any issues with the lamp, refer to the
following troubleshooting steps:
| Problem | Possible Cause | Corrective Action |
|---|---|---|
| Bulb does not light | Bulb is burnt out or damaged | Replace the bulb |
| Bulb does not light | Power to lamp is off | Confirm that power is on |
| Bulb does not light | Lamp is not plugged in | Confirm that the lamp is plugged in |
If the lamp still does not work after troubleshooting, please
contact your local Ethan Allen Design Center for further
assistance.
Remember to save these instructions for future reference.
090521 SANSOVINO TABLE LAMP SAFETY, ASSEMBLY, CARE, AND TROUBLESHOOTING
IMPORTANT SAFETY INSTRUCTIONS
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, AND PERSONAL INJURY: This lighting fixture is for indoor use only. This lamp is equipped with a polarized plug. One plug blade is wider than the other. DO NOT MODIFY the plug or power cord in any way. DO NOT EXCEED the recommended bulb wattage. Use only the type of bulb specified. Keep flammable materials away from bulb. DO NOT OPEN the product or alter the wiring in any manner. Extension cord: Follow precautions provided with power cord.
UNPACKING: Use care when unpacking. Locate ALL PARTS INCLUDED before disposing of packaging materials.
ASSEMBLY, CARE, AND TROUBLESHOOTING
Tools Required For Assembly: Tools are not required. Required: Light bulb is not included.
Parts Included: Refer to Figure 1. A. Finial B. Shade: Shade may be packed in separate carton C. Harp: Harp styles may vary. D. Lamp Socket & Lamp Base (Attached, no assembly required) E. Line Cord Plug Cover
Assembly Procedure: Refer to Figure 1. 1. Install Harp Part C onto Lamp Socket Part D. 2. Install Shade Part B onto Harp Part C. 3. Install Finial Part A onto Harp Part C. 4. Install Bulb into Lamp Socket Part D. 5. Remove Plug Cap, Part E from plug
Caring for and Cleaning your lamp: 1. To clean, wipe with a soft dry cloth. 2. DO NOT USE cleaners, scouring pads, etc. 3. Unplug lamp and allow bulb to cool before changing bulb.
Troubleshooting:
Problem:
Possible cause: Correct by:
Bulb does not light
Bulb is burnt out or damaged
Replace bulb
Power to lamp is off
Confirm power is on
Lamp is not plugged in
Confirm lamp is plugged in
In the event that the lighting fixture does not work after troubleshooting, contact your local Ethan Allen Design Center.
SAVE THESE INSTRUCTIONS
©2016 Ethan Allen Global, Inc.
Page 1 of 1
