JYL1128A Table Lamp
Product Information
The product is a lamp with a lamp base (Piece A), a socket
(Piece B), a shade (Piece C), and a bulb (Piece D). The lamp has a
polarized plug, which is a safety feature to reduce the risk of
electric shock. The lamp requires an on/off Type A bulb with a
maximum wattage of 40 watts or an LED bulb with a maximum wattage
of 9 watts. The product dimensions are 4.375 inches in length,
4.375 inches in width, and 9.5 inches in height.
Product Usage Instructions
WARNING: Inspect the item carefully before
attempting to install it. If there is any damage or obvious defect,
do not install it. Once installed, the item may not be
returned.
Care and Maintenance: Unplug the lamp before
using any cleaning solutions. Dust the shade with a feather duster
or an appropriate vacuum-brush attachment. Wipe the lamp with a
soft, dry cloth and clean the lamp base with methods appropriate to
the material. Avoid using chemicals and household cleaners as they
may damage the finish.
Notice & Important Safety Instructions:
- Make sure you have all parts indicated before beginning
assembly of this item. - Assemble the item on a soft surface to prevent scratching the
finish during assembly. - To reduce the risk of fire, electrical shock, or injury to
persons or property, follow the guidelines below for safe use and
installation:- The external flexible cable or cord of this lamp cannot be
replaced. If the cord is damaged, the lamp shall be destroyed. - This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of electric
shock. This plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician. Never use with
an extension cord unless the plug can be fully inserted. Do not
attempt to disregard this safety feature.
- The external flexible cable or cord of this lamp cannot be
Preparation: Before beginning assembly of the
product, make sure all parts are present. Compare parts with the
package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated assembly time is 6 minutes.
Assembly Instructions:
- Insert the bulb (Piece D) into the socket (Piece B).
- Put the light on a level surface to check if everything is
stable.
Enjoy your lamp!
WARNING INSPECT ITEM CAREFULLY BEFORE ATTEMPTING TO INSTALL. IF THERE IS ANY DAMAGE OR OBVIOUS DEFECT, DO NOT INSTALL. ITEM MAY NOT BE RETURNED ONCE IT HAS BEEN INSTALLED.
CARE AND MAINTENANCE Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS
* Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this lamp cannot be replaced; If the cord is damaged, the lamp shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to disregard this safety feature.
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lamp base
1X
C
Shade
1X
Model# JYL1128A Product Dimensions: 4.375″Lx 4.375″W x 9.5″H
B
Socket
1X
D
Bulb
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 40-WATT OR LED BULB MAX 9-WATT, THERE IS LED 9.5-WATT SMART BULB IN THE BOX .
1
2
Step 1 Insert the bulb(D) into the socket(B).
ENJOY YOUR LAMP
Step2 Put the light on a level surface to check if everything is stable.
