TBL4407A Quin 25 inch Grey Table Lamp
Product Information
The TBL4407A is a portable lamp with a polarized plug (one blade
is wider than the other) as a safety feature to reduce the risk of
electric shock. The lamp comes with a lamp base (A), neck (B),
saddle (C), socket (D), harp (E), shade (F), finial (G) and a bulb
(H). The lamp has a maximum capacity for an on/off type A bulb of
100 watts or an LED bulb of 12 watts. The package includes an LED
9-watt bulb.
The lamp base and neck are made of various materials, and
appropriate cleaning methods should be used for each. Avoid using
chemicals and household cleaners as they may damage the finish.
Product Usage Instructions
- Before beginning assembly of the product, make sure all parts
are present. Compare parts with package contents list and hardware
contents list. If any part is missing or damaged, do not attempt to
assemble the product. Estimated assembly time: 6 minutes. - Unplug the lamp before using any cleaning solutions. Dust
shades with a feather duster or with an appropriate vacuum-brush
attachment. Wipe with a soft, dry cloth and clean lamp bases with
the methods appropriate to the material. Avoid the use of chemicals
and household cleaners as they may damage the finish. - Pull the power cord to connect the Neck (B) to the Base (A).
Screw the Neck (B) onto the Lamp base (A). Be careful not to twist
the power cord and tighten securely. - Insert the Harp (E) into the Saddle (C). Put the shade(F) on
the Harp(E), then tighten the Finial (G) into the Harp (E). Insert
the bulb(H) into the socket(D). - Put the light on a level surface to check if everything is
stable.
Remember that this lamp has a polarized plug, and it will fit in
a polarized outlet only one way. If the plug does not fit fully in
the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician. Never use with an extension cord unless the
plug can be fully inserted. Do not attempt to defeat this safety
feature.
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE& IMPORTANT SAFETY INSTRUCTIONS * Please make sure that you have all parts indicated before you begin assembly of this item * This item should be assembled on a soft surface to prevent scratching the finish during assembly * To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation *The external flexible cable or cord of this luminaire cannot be replaced; If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. Never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Model#: TBL4407A Product Dimensions: 14″W X 14″D X 25″H
Part List and Hardware List
PIECE DESCRIPTION PICTURE QUANTITY PIECE DESCRIPTION PICTURE QUANTITY
A
Lamp base
1X
E
Harp
1X
B
Neck
1X
F
Shade
1X
C
Saddle
1X
G
Finial
1X
D
Socket
1X
H
Bulb
1X
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR LED BULB MAX 12-WATT THERE IS LED 9-WATT BULB IN THE BOX
2
Step 1 Pull power cord to connect the Neck (B)to the Base (A). Screw the Neck (B) onto the Lamp base (A) Be careful not to twist the power cord and tighten securely
Step2 Insert the Harp (E) into the Saddle (C). Put the shade(F) on the Harp(E),then tighten the Finial (G)into the Harp (E) Insert the bulb(H) into the socket(D).
ENJOY YOUR LAMP
Step3 Put the light on a level surface to check if everything is stable.
