JCHR35W3C1 Hand-Held LCD Remote Controller
Product Information
The JCHR35W3C1/C2 Hand-held LCD Remote Controller is a remote
control device used to operate motorized shades. It is available in
two models: JCH35W3C1 16-channel LCD remote controller and
JCH35W3C2 16-channel dual control LCD remote controller.
Parameters
For more information about the product parameters, please refer
to the nameplate.
The JCHR35W3C1/C2 Hand-held LCD Remote Controller has various
buttons for different operations. Please refer to the user manual
for more information.
Caution!
If the voltage is too low, the LCD screen digital display will
be weak, prompting you to replace the battery.
Instructions
- Channels & Groups Toggling: Channel 0 is
the group control for all the channels. - Number of Channels Setting: Please refer to
the user manual for more information. - Number of Groups Setting: Please refer to the
user manual for more information. - Channel in Group Setting: Short press , if you
want the Channel in the group, the Channel number will be
steady-lit. Short press again, if you want the Channel not in the
group, the Channel number will be flashing. - Check the Channels in Groups: Please refer to
the user manual for more information. - Prohibit Dual-key Operation: Please refer to
the user manual for more information. - Position Percent Setting: Stop on the desired
percentage down and wait 3s. The shades will move to the chosen
percentage down position. - Other Operations: Please refer to the motor
operation instruction.
It is important to follow the instructions carefully to ensure
proper usage of the JCHR35W3C1/C2 Hand-held LCD Remote
Controller.
JCHR35W3C1/C2 Hand-held LCD Remote Controller
User Manual
01 Product Info
03 Parameters(more info please refer to the nameplate)
JCH35W3C1 16-channel LCD remote controller
02 Buttons
JCH35W3C2 16-channel dual control LCD
remote controller
04 Caution!
When the voltage is too low, the LCD screen digital display will be weak, prompting to replace the battery.
05 Instructions
a.Channels & Groups Toggling
JCH35W3C1 16-channel LCD remote controller
JCH35W3C2 16-channel dual control LCD
remote controller
NoteChannel 0 is the group control for all the channels.
b.Number of Channels Setting
c.Number of Groups Setting
d.Channel in Group Setting Short press , if you want the Channel in the group, the Channel number will be steady-lit. Short press again, if you want the Channel not in the group, the Channel number will be flashing.
e.Check the Channels in Groups
f.Prohibit Dual-key Operation
icon
g.Position Percent Setting
Stop on the desired percentage down and wait 3s. The shades will move to the chosen percentage down position. h.For other operations, please refer to the motor operation instruction
